SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Whiteline Rear Sway Bar 24mm Adjustable
Subaru Models (inc. 2004-2007 WRX)
Features & Product Details
RallySport Direct is proud to offer you quality suspension products brought to you by Whiteline. You can find Whiteline products utilized by car enthusiasts on a worldwide scale simply because of the design, integrity, and performance that Whiteline products deliver.
Here, you are looking at the Whiteline 24mm 3-hole Adjustable Rear Sway Bar. This sway bar makes for an excellent investment for those of you who want to drastically improve the handling of your vehicle for daily use, the occasional spirited canyon run, or for competition use. This sway bar will provide your vehicle with more balance to improve the overall handling and driver feedback of your vehicle.
DETAILS:
Specifications
Brand:
Whiteline
Adjustable Front:
Not Included
Adjustable Rear:
Yes
Bushings Included:
Yes
Mounts Included:
No
Sway Bar Diameter Front:
Not Included
Sway Bar Diameter Rear:
24mm
Sway Bar Type:
Solid
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
No user media. You can upload a photo or video of your install by posting a review.
0 of 1 people found the following review helpful
5out of
5stars
Noah
I purchased a Whiteline 22mm Front and 24mm Rear Sway bar (along with the Whiteline endlink kit) for my 2002 WRX. These products completely change the way the car feels! It is absolutely amazing how different the car feels with these sway bars on. The car stays much more flat when cornering. Install is slightly tricky without the use of a lift, but definitely worth it for the end results. One issue that I ran into is that the supplied bushings didn't fit into the factory brackets. With a little shaving off the edges of the bushings, they slide right in. Overall this product is definitely worth the money if you're willing to modify the bushings that come with it!
1 of 3 people found the following review helpful
4out of
5stars
hendy0963635
Overall the bars fit nicely. Cornering has improved and does feel better, but I wasn't totally amazed by it. Be sure you have a hoist, or this install 'could' take longer than you would like. (Unless you enjoy rolling around on the ground) Also, the rear sway bar bushings that came with the kit didn't fit properly without modification. (Had to cut off the edges of the bushings). You would think for the money you're spending fitment wouldn't be an issue, especially since I purchased a reputable brand rather than Ebay garbage. I am a professional technician/mechanic so making something work and/or fit isn't the issue here. Buying a product that says it will fit and it does not, is.
0 of 1 people found the following review helpful
5out of
5stars
Bandaru
I installed this on my 2004 WRX Sedan along with the Whiteline sway bar mounts and front 24mm sway bar. (Rear set to Medium, front set to stiff) It all went together easily, and I instantly felt the difference on the first drive after install. WAY better than stock.
1 of 1 people found the following review helpful
5out of
5stars
Dalilamba
Instal was a breeze. just follow the instructions. I'd highly highly recommend installing one of these if you want to upgrade the suspension quickly and at a low cost. The only trouble I had was with setting the bar to it's stiffest setting. I've done almost 400 lbs of weight reduction to the car and the rear end sits higher than stock. So the hole doesn't line up very easily with the end link. I'll likely have to weight the rear end to achieve the stiffest setting. On my first test drive I was able to hit turns about 5 mph quicker than before with hardly any body roll. Excellent product!! Thanks RSD!! -Seth
1 of 1 people found the following review helpful
5out of
5stars
ImprezaJake
Installation didnt take too long, about an hour or so. Didnt have to take off my exhuast and everything went smoothly. Feels alot better in the rear while driving worth every penny.
QUESTIONS & ANSWERS
-
Q: 2002 WRX Sedan Fitment Noah6 years ago
Is this part a direct bolt on? Or would I also need to purchase the 24mm Sway Bar Mounts (Part No. WHI KBR21-24)?
-
-
1 of
1 people found the
following answer helpful
A: This part is a direct bolt on, though you could purchase mounts and end links to help fitment as well as performance.
Tyler A. @ RallySport Direct 6 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Bushing material Jovvy6 years ago
-
-
0 of
1 people found the
following answer helpful
A: The bushings are made of polyurethane.
Chris W. @ RallySport Direct 6 years agoWas this answer helpful?
-
0 of
1 people found the
following answer helpful
-
Q: fitment derek_finch8 years ago
-
-
0 of
1 people found the
following answer helpful
A: Yes, this bar will fit a 2004 WRX Wagon.
Jonathan @ Whiteline @ Whiteline 8 years agoWas this answer helpful?
-
0 of
1 people found the
following answer helpful
-
Q: Sway bar mounts Milhouse19 years ago
-
-
0 of
1 people found the
following answer helpful
A: You may be able to use the Perrin Stout Mounts with this sway bar, but we have not tested fitment of the bar with those mounts or the Whiteline bushings with the Perrin brackets and we are not able to guarantee compatibility.
Zach G. @ RallySport Direct 9 years agoWas this answer helpful?
-
0 of
1 people found the
following answer helpful
-
Q: Fit 2001 2.5RS? (GC) Frank01GC10 years ago
-
-
0 of
0 people found the
following answer helpful
A: We do not have a confirmation this bar will fit the 2001 2.5RS. This bar is confirmed for specific WRX and some 2.5i and RS models listed in confirmed applications by the manufacturers but we do not have a vehicle to test fit this bar for earlier 2.5RS models.
Nick S. @ RallySport Direct 10 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
