SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
Whiteline Front Sway Bar 24mm Adjustable
Subaru STI 2008-2014 / WRX 2011-2014 / Forester XT 2009-2013
Features & Product Details
RallySport Direct is proud to offer you quality suspension products brought to you by Whiteline. You can find Whiteline products utilized by car enthusiasts on a worldwide scale simply because of the design, integrity, and performance that Whiteline products deliver.
Here, you are looking at the Whiteline 24mm 2-hole Adjustable Front Sway Bar. This sway bar makes for an excellent investment for those of you who want to drastically improve the handling of your vehicle for daily use, the occasional spirited canyon run, or for competition use. This sway bar will provide your vehicle with more balance to improve the overall handling and driver feedback of your vehicle.
DETAILS:
Product Video
Specifications
Brand:
Whiteline
Adjustable Front:
Yes
Adjustable Rear:
Not Included
Bushings Included:
Yes
Mounts Included:
No
Sway Bar Diameter Front:
24mm
Sway Bar Diameter Rear:
Not Included
Sway Bar Type:
Solid
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
1 of 1 people found the following review helpful
4out of
5stars
Fitment is 10 out of 10. Looks soo good now
Installed the 24mm sway baron my 2012 wrx hatch. Once i got it mounted i started to look at the spacing from etheir end link mounts on control arm. And the passager side had a very good amount more space than the driver side. Mocked up the kartboy endlinks, driver side looked about perfect, passager side had like over and inch of spacing that needed to be takin out. I did have some spacers that worked still think thats pretty stupid that you have to space one side more than the other. Rear went on amazing. Dont know if its the sway bar or endlinks. Id say the sway bar isnt long enough on passager side. (And yes i installed it right, its the only issues beside that with the set up so far.)
4out of
5stars
nbtech
I installed this bar with Whiteline adjustable front endlinks. With the bar set to the stiff setting, I noticed that the top of the endlink hit the passenger side tie rod on full right lock, but the driver's side does not have this problem. With the endlink in the soft setting, the bar is still very close to touching the tie rod under the same conditions. I removed the bar and found that it is bent on that side, but looks safe to run on the soft setting while I wait for a replacement.
5out of
5stars
house03
I installed the rear bar last year shortly before my car broke down, and bought this front one once I got back on the road. I drove it long enough with the factory front to tell that this one is a vast improvement. Steering effort is greatly reduced (on the strongest setting BTW) and turn in a helluva lot sharper!
2out of
5stars
juandiego
I thought I loved these swaybar but they have been more of a headache. After driving and hearing a slight clicking noise I took these to my local performance shop and that is when we discovered the bar was bent hitting the control arm. If it weren't for this issue I would be happy with them. Apparently they have a history of being bent I thought that was rectified.
5out of
5stars
potterdagreat61428
installed this sway bar along with kartbot endlinks F & R, with 22mm rear bar with the whiteline rear brace bars, and soon after did a canyon run, and the car responded way better then it has before, really be able to brake later and take turns more aggressive
QUESTIONS & ANSWERS
-
Q: Swaybar Bushings Alexander Paluiko6 years ago
I need new swaybar bushings from this kit. Can find them. Where I can buy them?
-
-
0 of
0 people found the
following answer helpful
A: Please reach out to the [email protected]rallysportdirect.com email, or our toll free number 1-888-45-RALLY, and we can get you taken care of!
Megan L. @ RallySport Direct 5 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: mounts Dan Harper9 years ago
-
-
0 of
0 people found the
following answer helpful
A: Yes you can use the stock mounts.
Kyle A. @ RallySport Direct 9 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: rubbing issue johnathan d10 years ago
-
-
0 of
0 people found the
following answer helpful
A: From what you are explaining, it sounds like the sway bar may have been installed upside down, which is not uncommon. Please contact us for further assistance.
Zach G. @ RallySport Direct 10 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 2012 subaru sti Ryan / Teo10 years ago
-
-
0 of
0 people found the
following answer helpful
A: That is not included, just reason being is you use all factory torque specs same as the Subaru Factory Service Manual
Kirill C. @ RallySport Direct 10 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 2012 subaru sti Ryan / Teo10 years ago
-
-
0 of
0 people found the
following answer helpful
A: It comes with a universal install instructions. Reason is that this is installed just like the stock bar. So you can use the FSM to do that.
Kirill C. @ RallySport Direct 10 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
