- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Whiteline Front Sway Bar 24mm
Subaru WRX 2002-2007 / STI 2007
Features & Product Details
RallySport Direct is proud to offer you quality suspension products brought to you by Whiteline. You can find Whiteline products utilized by car enthusiasts on a worldwide scale simply because of the design, integrity, and performance that Whiteline products deliver.
Here, you are looking at the Whiteline 24mm Front Sway Bar. This sway bar makes for an excellent investment for those of you who want to drastically improve the handling of your vehicle for daily use, the occasional spirited canyon run, or for competition use. This sway bar will provide your vehicle with more balance to improve the overall handling and driver feedback of your vehicle.
DETAILS:
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Holy crap, cornering is way more stable now! Install was cake too
Only reason I gave 4/5 is because I needed spacers with the endlinks. Maybe a dumb reason but I was not happy to find out this bar was too short, wtf whiteline make your bar the right length! Ans also with Subaru, watch out, will need to probably remove the subframe. Not a huge deal but work with some friends bc these bolts are huge and take a while to wrench out. To the good, and there are serious pros to these bars! The front is planted, and stiff and provides sturdy, and balanced steering coupled with a rear 24mm bar. I have an '02 WRX with 24mm front and rear WL bars, front is non adjustable and rear is adjustable to stiffest setting (~25mm). AutoX is way more fun, and street driving is as well. Ride is stiff and comfort will be sacrificed.
Long story short, had to cut both old endlinks off with angle grinder to get the old bar out. Luckily local subie shop had new endlinks in stock. Not a lot of room to get at some of the nuts and bolts. This is worst case scenario (previous owner stripped the endlink bolts and I didn't know). PB blaster helps too cuz things will be rusty. Paired this with a 22mm adjustable rear and couldn't be happier. Didn't want an adjustable front too as I didn't want too many options to mess with, just wanted to set it and forget it!
I actually found a way to install this without removing the subframe on my 07. Had to cut the old one to get it out but the whiteline is straighter and will fit if you remove one of the wheels and wiggle it a bit. Front stiffens up noticeably in the turns.
This swaybar is amazing! If you want better turn-in increased handling and less body roll this is the bar to buy! The bar is a little difficult to install but is well worth the time! Very satisfied!
QUESTIONS & ANSWERS
-
Q: 2002 wrx wagon Tyler02wrx4 years ago
Will this fit a 2002 wrx wagon ?
-
-
0 of
0 people found the
following answer helpful
A: This is only confirmed for sedan models, the closest option we carry for a wagon is the 22mm part # BSF12Z. There were some reviews of the adjustable version of this bar, part #BSF33XZ fitting on a wagon, but we do not confirm that fitment either.
Riley D. @ RallySport Direct 4 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment Question STidaho10 years ago
-
-
0 of
0 people found the
following answer helpful
A: Not 100% sure on the exact difference. However there must be enough of a difference between the 2 years that Whiteline opted not to list this for that application to be compatible.
Kirill C. @ RallySport Direct 10 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: help SoulApostle10 years ago
-
-
0 of
0 people found the
following answer helpful
A: No new mounts are needed. The supplied bushings will fit into the stock location with no issues :)
Kirill C. @ RallySport Direct 10 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: will it fit a 05 wagon? wrxwagon056011 years ago
-
-
0 of
0 people found the
following answer helpful
A: According to Whiteline's website this does fit the MY01-07 WRX Wagon models.
Tanner S. @ RallySport Direct 11 years agoWas this answer helpful? -
0 of
0 people found the
following answer helpful
A: This bar unfortunately does not fit the wagon. You can use the BSF12 or BSF12Z bars from Whiteline on your wagon without problems though.
Tanner S. @ RallySport Direct 11 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
