SET YOUR CAR
Blouch Dominator 3.0XT-R 8cm^2 Turbo
MODEL # BLC DOM3.0XTR8CM^2
awangard.motors35013 4 years ago
Dyno numbers a 392whp/431tq at 22lb of boost Gas - 94 water/Meth injection - small nozzle Spool up is pretty quick , im hitting full boost at about 3400rpm ----------------- Acording to my tuner Seems like my TMIC become a bottleneck i have a stock STI TMIC Overall - very happy with that turbo
Rainerelliott32659 9 months ago
jacob-compton26340 4 years ago
i haven't had the chance of running the turbo yet but i thought id post this before i forgot. i put the turbo on and at first it wasnting going to to able to fit the intake plumbing on due to the fact that the turbo was directly behind the TGV Assembly. so i kinda panicked and started making phone calls and emailing to sort of the issue. what i found out just looking things over was nothing big but if your not aware of it this (mis-lining up) will happen to you. Anyways the Bolts on your down pipe-header are a little bit smaller than the holes on the down pipe/header it self. not a whole lot but at the top end of the pipe where your turbo is this means it can shift side to side almost a good 2 1/2. when when you install this pipe make sure to keep it tight towards the engine as you tighten the bolts up and things will line up nicely. just a little quick fix i had i thought id share.