SET YOUR CAR
Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts
Product images
Product Media
Mishimoto Silicone Induction Hose Red (Part Number: )
Mishimoto Silicone Induction Hose Red (Part Number: )
Mishimoto Silicone Induction Hose Red (Part Number: )
Mishimoto Silicone Induction Hose Red (Part Number: )
Mishimoto Silicone Induction Hose Red (Part Number: )
Mishimoto Silicone Induction Hose Red (Part Number: )
Community Media
Mishimoto Silicone Induction Hose Red (Part Number: )
Mishimoto Silicone Induction Hose Red (Part Number: )
Mishimoto Silicone Induction Hose Red
Subaru WRX 2002-2007 / STI 2004+ / Forester XT 2004-2008
Read 6 Reviews | 5 Q&As
Part # MMHOSE-SUB-IHRD
$189.00
msrp: $315.00

Ships within 35 days

Features & Product Details

RallySport Direct proudly carries a great selection of both performance and cooling upgrades brought to you by Mishimoto.

On this page, you are looking at the Mishimoto Silicone Induction Hose. This has been designed to be a direct replacement for your factory induction hose which is prone to cracking and leaking due to age or mileage. More importantly, it has been designed to improve the performance of your vehicle.

Here are the details:

  • Direct fitment
  • Made of high-grade silicone and heat-resistant embedded fibers
  • Max temperature range of 330°F
  • Increased piping diameter with smooth interior walls
  • Reinforced with wire to prevent collapse under pressure 
  • Improves power, torque, and throttle response
  • Includes hose fittings and T-bolt clamp making this hose ready for the installation
  • NOTE: Aftermarket silicone post MAF hose required as stock post MAF hose is not compatible 
  • Red finish
  • Specifications

    Brand: Mishimoto
    Color: Red
    Installation Hardware Included: Yes
    Material: Reinforced Silicone
    Mfgr. Warranty: Limited Lifetime
    Condition: New Product
    Return Policy:

    RallySport Guarantee - 30 Days


    Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.

    RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.

    The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
    RallySport Guarantee

    PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED

    REVIEWS & CUSTOMER MEDIA

    6 Reviews
    3.7 out of 5 Stars
    5 Stars
    (3)
    4 Stars
    (0)
    3 Stars
    (2)
    2 Stars
    (0)
    1 Stars
    (1)
    Customer Photos and Videos
    Mishimoto Silicone Induction Hose Red ( Part Number: MMHOSE-SUB-IHRD)
    Mishimoto Silicone Induction Hose Red ( Part Number: MMHOSE-SUB-IHRD)
    Good Value Inlet Hose 4 months ago
    sti_hacker
    Good value inlet hose, fits well. No issues with install beyond normal install headaches. Would recommend to other people.
      
    Was this review helpful?
    1 of 1 people found the following review helpful
    Induction hose install 3 years ago
    jllm
    Quality seems okay, but just save yourself the headache and take the manifold off. Seriously. Don't be a clown like me and think the Mishimoto install video is realistic.
      
    Was this review helpful?
    Great Product + My 2 cents... 3 years ago
    VItaminRich
    Mishimoto knows what's up! All of the little hose inlets are positioned perfectly for final fitment. Getting this thing in is challenging and I recommend a buddy system along with a large 90° Hook Tool and a 90° Needle-Nose Long-Handle Plyers. It also can't hurt to have some small hose clamps for tightening all those smaller hoses down for good. All in all, great product and great company. I installed mine with a PERRIN Afta MAF hose, because red. Here is a great video that I used to help educate myself with the install (camera work isn't the best but the installer has clearly done this job many times) – https://www.youtube.com/watch?v=IUQDZG3w3Qw&index=4&list=WL **BEFORE INSTALLING, remove the valve duty solenoid mounted on the intake manifold before installing! I accidentally broke mine (it cost $120) and only one dealer (45 miles away) in my state had it in stock...
      
    Was this review helpful?
    3 of 5 people found the following review helpful
    Poor fitment 4 years ago
    h2oboy8377496
    I had extreme difficulty getting this to fit in my 2002 WRX. The construction is very good however the fitment is very poor. The hose hangs up on the intake manifold making it difficult to fit onto the turbo inlet. Also the tolerance of that end of the tube is very tight, also making it difficult to slide onto the turbo inlet. From there the BOV bypass is about 2 inches forward from stock, so mine wouldn't fit. Also all but one vacuum hose connection was the wrong size. And finally is there was no provision for attaching my cold air intake to the hose. Its simply just a piece of reinforced silicone hose. I spent 5 hours trying to get the hose installed and ended up returning it and buying a Perrin. The Perrin was installed in about 45 mins.
      
    Was this review helpful?
    1 of 1 people found the following review helpful
    Seems Off  4 years ago
    atvabington55798
    Bought this product to replace my failing oem intake. no matter what if not pulling the intake manifold, it is a pain to install. After i got in where it needed to be, the bypass valve hose is located further from the turbo then the oem and actually rubs against the bottom of the intake and sitting on fuel lines.
      
    Was this review helpful?

    QUESTIONS & ANSWERS

    • Q: COBB Post MAF fitment  ProjectREX9 months ago

      will this fit with a cobb post maf hose? dont want to replace half if the intake i just got. also running the stock turbo on 2006 wrx wagon
    • Q: Stock post MAF hose is not compatible  ben_penton111284 years ago

      I'm running a Mishimoto Cold Air Intake on my 2011 STI, I noticed in the description: Aftermarket silicone post MAF hose required. Stock post MAF hose is not compatible Yet in another response below it says: This is a complete bolt on and go product. Do I, or do I not need to change my post MAF hose? Thanks.
    • Q: Td05 turbo  Azizi4 years ago

      does this product will be fit on turbo td05? thanks man
      • 0 of 0 people found the following answer helpful

        A:  As long as the turbocharger you are using has a stock sized inlet this will fit great.

        Nick S. @ RallySport Direct 4 years ago  
          
        Was this answer helpful?
    • Q: size?  agsutinromano10753284 years ago

      is this 3 inches?
      • 0 of 0 people found the following answer helpful

        A:  The hose diameter on the turbo side is 2.38 inner and 2.63 outer. On the intake side, the size is 2.75 Inner diameter with a 3.25 outer diameter.

        guest569faaee2a8d2517038b4568 @
          
        Was this answer helpful?
    • Q: Mishimoto Silicone Induction Hose  shiroikage4 years ago

      Is it a straight up replacement bolt-on or will it require some sort of tuning to run properly? More to the point is it will it throw any CELs?

    This Part Fits