We couldn't find any results
- Use different keywords
- Double check your spelling
- Start with something less specific - you can refine your search results later
- Try changing some of your filters below:
Features & Product Details
When you're ready to start the path of modifications, RallySport Direct offers several variations that you can choose from when it comes to exhaust systems. Turbocharged vehicles respond very well to exhaust modifications because typically your factory unit is very restrictive due to the design in the routing, the limited piping diameter, and factory exhaust systems can just be plain heavy.
Aftermarket exhaust systems are very beneficial to turbocharged vehicles because of smooth mandrel bends in the piping allow for reduced turbulence in the exhaust flow. And increases in piping diameter will allow the turbo to breathe better which creates better throttle response, decreased spool times, and increase in boost, horsepower, and torque.
Here, you will have the opportunity to put together a turbo back exhaust system that is tailored to your vehicle and your style. With this kit,you will have everything needed to bolt directly to your vehicle. This includes a downpipe of your preference, as well as a cat-back exhaust system to your preference. New gaskets will be included to make for a ready installation.
Please note that hardware is not included however, it is recommended and available to make installation a little easier as the OEM hardware can become damaged upon removal.
If you're looking for that ultimate performing cat-back exhaust system, then you will be pleased with the Invidia Racing Cat Back Exhaust System. This exhaust system has been specifically designed with minimal bends to reduce as much exhaust turbulence as possible. Allowing for improved throttle response, reduced turbo lag, and increases in both horsepower and torque.
This exhaust system has been fabricated from 304 stainless steel and features 76MM piping for an aggressive tone under acceleration. Exhaust gasses will exit a polished 101MM tip which adds a nice touch to the exterior.
Exhaust hangers are welded onto the OEM locations of this exhaust system so no further modifications to the body will be needed for fitment. New gaskets, hardware, as well as a silencer are provided to make the Racing Cat Back Exhaust System ready for installation.
If you are looking for a great way to squeeze a little extra performance from your vehicle, then you will be pleased with the Invidia N1 Cat Back Exhaust System. There are several performance attributes that makes this an excellent upgrade. This exhaust system has been made from 304 stainless steel and features 76MM piping. The exhaust has also been designed with minimal bends to reduce the amount of turbulence during acceleration, allowing the engine to exhale the exhaust gasses with less restrictions. This means you will have improvements in throttle response, along with increases in both horsepower and torque.
This exhaust will come with a polished 101MM tip, and the exhaust hangers are welded onto the stock location of the pipes so you don't have to perform further modifications.
New gaskets, hardware, as well as a silencer will be included to make this exhaust system ready for installation.
RallySport Direct is proud to carry the Invidia Catted Downpipe. This is a great way to improve the power and performance as well as improving the throttle response while reducing the turbo lag.
Here are the key features:
Upgrade your vehicle with the Invidia catted Downpipe. This particular downpipe features a divorced wastegate flange which will separate the exhaust gas while exiting the downpipe. This design helps promote a smoother exhaust flow which results in more horsepower and torque and reduced turbo lag. The downpipe has also been constructed from 304 stainless steel materials with 3" mandrel bent tubing and will bolt up to any stock replacement catback or factory exhaust system.
New hardware and a gasket for the end of the downpipe will be included, please note that a new downpipe gasket is recommended to complete the installation of this downpipe.
When removing or replacing exhaust components, it is always a good idea to replace gaskets, as well as the bolts. These parts endure a lot of heat cycling and eventually after a certain mileage things can get stubborn, and just become damaged upon removal.
These are Subaru OEM which means they will thread in correctly the first time.
Don't resort to going to your local hardware store and try to get hardware that looks like it will fit. Do it the right with an OEM component.
Over time, your factory turbo to downpipe studs can become haggard and certainly stubborn while removing due to heat, rust, mileage, etc. These are brand new OEM Downpipe to Turbo Exhaust studs, so when you install or upgrade your downpipe, it should be a hassle-free install.
On this page, you will find the Subaru OEM Downpipe to Turbo Exhaust Nut. RallySport Direct wants to supply you with the correct hardware so that you don't go to your local home improvement store and get a nut that looks like it will work.
Any hardware in or around the turbocharger experiences more heat than any other nut on your vehicle, and over time, they can become warped.
If you had just upgraded your exhaust system, or are just tired of your factory exhaust systems swaying from side to side, then the Kartboy 12mm exhaust hangers will completely eliminate this problem. The Kartboy 12mm exhaust hangers are made out of robust polyurethane that will last a much longer life over the factory exhaust hangers. These will fit a 12mm exhaust hanger, they are 35mm in length from center to center, and they are 25mm thick.
These are computer designed and analyzed to allow very little movement while retaining the stock location, size, and length.
All Kartboy products are Hand Made in the USA. 100% Guaranteed.
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.