Beatrush Rear Differential Tension Bar - Subaru STI 2008+
Manufacturer Part # S76102MTD-FM
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
great item fit well
MillionKnives 7 months ago
The item fit so well perfect snugg fit! I saw sone review said hard to fit but the trick is u have to adjust the diff to fit. I am super happy with the product! Oem old bushing can be hard to remove.
Take your time...
aluminatisound03266 4 years ago
Much better than the stock unit in terms of bushing quality. Put the car on four jack stands, then support the rear differential with a jack/block of wood. Remove the two bolts holding the tension bar to the bottom of the rear differential, then remove the two bolts securing the bushings. If the new one is not going on properly, lower the jack slightly to line up the bolts holes. Overall a tighter rear end feel but with not much increase in NVH that i can hear.
Don;t know what the fitment issues are all about!
mark.plum66427 4 years ago
It was interesting reading some of the reviews about the fitment of this product. The fitment was spot-on on my 2013 STi, and the support has made a truly noticeable improvement in the response of the rear diff to power. Don't wait, just get this!
Andy. 5 years ago
I had a problem wt the brace touching the diff. We had to shim it to make it work. Solid design though no noticeable NVHS happy with product
not the best fitment
jackmayoffer59801 6 years ago
this piece is not anodized like it looks like in the picture. it is painted i think. fitment was not great, the holes do not line up perfectly so i had a hard time installing it. i had to wedge a screwdriver on top of the diff so that the bolts would stay put. then i used a mallot to tap the bar in place. then had to use a screwdriver and mallot to line everything up.
QUESTIONS & ANSWERS
Q: 15+ wrx fitment dfoy0112425 2 years agoAnswer
Since you have confirmed that this part will fit the 15+ STI, would it be safe to assume that it will also fit the 15+ WRX?
A: We can only confirm fitment for this part on the STI.
Ben L. 2 years ago
Q: 2015 sti fitment Ben H 4 years agoAnswer
Do you guys think this would fit a 2015 sti? looks like it would but not 100% sure thanks