Tomei Fuel Pressure Regulator Adapter

QUESTIONS & ANSWERS

• Q: Perrin top feed fuel lines will this work?  Chuckless126492024 years ago

  I’m running top feed Perrin fuel lines with the fuel pressure regulator bolt in plate. It says to use a stock fuel pressure regulator but I want to run aftermarket. Would this adapter allow me to bolt it as well as the fpr to the plate of the Perrin lines?
  
• • 0 of 0 people found the following answer helpful

    A:  This would be only confirmed fitment for the stock fuel pressure regulator. You could try reaching out to Tomei to see if this is something that could work however.

    Devan M. @ RallySport Direct 4 years ago  
    Yes  No
    Was this answer helpful?

• Q: Do I need another fitting?  7 years ago

  I purchased this adaptor along with the Tomei type S fpr. Is there another fitting need to hook the 2 together? The fpr came with 2 fittings where I can hook up fuel lines but I'll need 3 to make this work, from my understanding. '02 WRX.
• • 1 of 1 people found the following answer helpful

    A:  You will need a 1/8NPT fitting in order to connect a fuel line to to this adapter, and you should be able to use fitting part number TOM 185103.

    Yes  No
    Was this answer helpful?

• Q: 2010???  chk1220251998 years ago

  Is there no adapter for the 2010 wrx??
• • 0 of 0 people found the following answer helpful

    A:  We do not have a fuel rail adapter available for the 2010 WRX At this time.

    Nick S. @ RallySport Direct 8 years ago  
    Yes  No
    Was this answer helpful?

• Q: fitment  imprezer8 years ago

  am willing to buy the sidefeed to topfeed conversion kit of id1000 with t1 fuel rail , so will this adapter fit the fuel rail offered with the conversion kit ?
• • 0 of 0 people found the following answer helpful

    A:  This adapter is made for the stock fuel rails and will not work with the Injector Dynamics rails.

    Zach G. @ RallySport Direct 8 years ago  
    Yes  No
    Was this answer helpful?

• Q: Adapter  John M8 years ago

  Instead of using it for a fuel pressure regulator, could you install a fuel pressure sender in its place?
• • 0 of 0 people found the following answer helpful

    A:  Due to the fitting size, it would not just bolt right in. Also this would block off your return system.

    Kirill C. @ RallySport Direct 8 years ago  
    Yes  No
    Was this answer helpful?