SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Whiteline Rear Sway Bar 24mm Adjustable

MODEL # WHIBSR37XZ

$242.00


  • Q: Lateral lock kit  electricchair125079861 year ago

    I see that this sway bar doesn't come with the lateral lock kit like the 24mm front sway bar. Is there a reason why?
  • Q: Brackets included?  PavelAlexei195 years ago

    Does it include the lateral link brackets? Thanks
    • 0 of 0 people found the following answer helpful

      A:  No, this package includes the sway bar, bushings, and a packet of sway bar grease.

      guest56ad69792a8d256e198b66b5 @
        
      Was this answer helpful?
  • Q: Fit Forester XT 05?  PavelAlexei195 years ago

    Will this bar fit a Forester XT 05 on STI suspension?
    • 0 of 0 people found the following answer helpful

      A:  It should however, we can not confirm this will fit on your swap.

      guest57853c642a8d25b5018c44a7 @
        
      Was this answer helpful?
  • Q: endlink?  kylesinclair5 years ago

    spacers need with kartboy endlinks or is it bolt and play
    • 0 of 0 people found the following answer helpful

      A:  Endlink spacers are not necessary for the rear and this will bolt up just like stock.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: What are the 3 settings on this adjustable bar?  mb6 years ago

    I assume the hardest is 24mm and the second and third holes are what settings?
    • 0 of 0 people found the following answer helpful

      A:  24mm is the diameter of the bar. The settings (holes) change the amount of force it takes to bend the bar. You physically cant alter the thickness of the bar, what you are altering by changing the hole location is the leverage your suspension has to flex the bar. The hole closes to the bar is the stiffest setting, and the hole farthest is the softest setting.

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
    • 1 of 1 people found the following answer helpful

      A:  For comparison purposes, the middle setting is the advertised sway bar size (in this case 24 mm). This is the same/closest position to where the OEM hole is relative to the mount position. The stiffer setting is approximately the stiffness of a bar 1 mm larger. Please see the following video and bulletin for additional information. http://www.youtube.com/watch?v=0ISNWRMB6c4 http://whiteline.com.au/docs/bulletins/BL-281.pdf

      Jonathan @ Whiteline @ Whiteline 6 years ago  
        
      Was this answer helpful?