- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Features & Product Details
RallySport Direct is proud to carry the Whiteline Steering Rack Bushings. These are direct replacements for your OEM steering rack bushings which are soft and will create excessive movement over time and mileage which will hinder driving feedback from the steering wheel.
The Whiteline units will provide a better initial turn in and an overall better driving experience.
Please note that with any harder bushings, there will be a slight increase in noise and vibration.
Hardware, along with a tool will be provided to make these bushings ready for the installaiton.
Specifications
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
I had kind of a custom application of these parts installing a newer STi rack on a forester subframe, so I only ended up using one side of this kit. Install for this is very easy with the removal tool included in the kit and the slide in new bushings. A must have on any older Subaru to improve steering feel.
i had these professionally installed during a steering rack replacement. my steering has a ton of feedback already because of a locking front diff. feel is very slightly improved for me and NVH is slightly increased as well. quality product. would recomend
took about 2 hours to install, instructions were vague but do-able. i did not mark the steering column and it was a pain re-aligning everything back together. overall performance is noticeable but slight.
Install was a couple hours and straightforward. Make sure you mark on the steering column where you disconnected it otherwise the wheel will be off center.
great product. definitely more responsive. install on the passenger side was cake. drivers side is just more involved: have to release the rack, by taking out the entire bolt that connects it. once thats done, removing the bushings with the tool and put everything back. torque specs on the bushing bolts are 44 ft/# and 17.5 on the rack bolt. don't forget to lube.
QUESTIONS & ANSWERS
-
Q: Which bushings Apatten936 years ago
I have an 02 WRX with a 05 STi steering rack installed. Would I use the 05-07 STi set or the 02-04 WRX/Sti set? Thanks!
-
-
0 of 0 people found the following answer helpful
A: I do believe the bushings will be based on the rack and not the car itself so the 05-07 STi kit should be what you need. I would suggest comparing the bushings on your rack next time you are underneath your car to the ones we have pictured to be sure. Thank you.
Tanner S. @ RallySport Direct 6 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: leak help skiingapple668717 years ago
-
-
1 of 1 people found the following answer helpful
A: They will not.
Kirill C. @ RallySport Direct 7 years agoWas this answer helpful?
-
1 of 1 people found the following answer helpful
-
Q: Difference? ayashifx55892347 years ago
-
-
0 of 0 people found the following answer helpful
A: No, I would not purchase both of them. The correct one for the 2004 WRX is the WHI KSR202.
Sterling W. @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: Fitement Cram8 years ago
-
-
0 of 0 people found the following answer helpful
A: As of this time (April, 2011) Whiteline has only confirmed fitment on the 2005-2007 WRX/STI. So these will not work on your 2.5i. The most up to date fitment information can be seen by viewing the 'Confirmed Applications' area on the product page. Thank you.
guest5633b7522a8d259b038ba50d @Was this answer helpful?
-
0 of 0 people found the following answer helpful
