SET YOUR CAR
FREE SHIPPING
On Orders of 99+.
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Kartboy Rear Subframe Lockdown Bolts

MODEL # KARKB-066

$30.00


  • Q: Tap Needed?  JoshSti4 years ago

    Do I really need a Tap for my 2005 STi to install this Kartboy Subframe Lockdown bolts? Please advise.
    • 4 of 4 people found the following answer helpful

      A:  It is not required to, however, because your car is a bit older, you may want to consider using a chaser tap to clean up the threads before you install these. The holes where these are installed are threaded from the factory but there are no bolts that are installed from the factory so the holes are exposed and can get dirty over time.

      Karsten B. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: fitment  keykuts6 years ago

    in the fitment chart its listed that these fit a 99 impreza rs, but in the comments its listed that these are for 02 and up.will these bolt right up to my 99 rs?thanks
    • 0 of 0 people found the following answer helpful

      A:  Yes, these would work with no issues on your 99 RS. Just make sure to clean off the threads on the vehicle side to ensure they are free from rust and other grime.

      Brady R @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Susp. height  hrvelez10 years ago

    Does this bolts get the suspension 1/4 lower as stated on the reviews?
    • 2 of 2 people found the following answer helpful

      A:  Kartboy has confirmed that these bolts should not have any affect on the suspension height because the the subframe is already locked down on height. The bolts are intended to eliminate movement rather than compress the subframe to the body.

      Zach G. @ RallySport Direct 10 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  No, those should retain the factory ride height. thanks, Cole

      colekelson @
        
      Was this answer helpful?
  • Q: Tap size  nyfitter63810 years ago

    If I could get my hands on a tap, what size tap would I use for these threads?
    • 1 of 5 people found the following answer helpful

      A:  According to my chart here these bolts would use an M14x1.25 tap.

      Tanner S. @ RallySport Direct 10 years ago  
        
      Was this answer helpful?
    • 3 of 3 people found the following answer helpful

      A:  The tap needed on my 03 WRX was a M12x1.25. I followed the advice and first bought the size 14 and it was too big. FYI, save yourself an extra trip to the hardware store.

      575rider
        
      Was this answer helpful?
    • 1 of 1 people found the following answer helpful

      A:  Don't give false information about the parts you're selling if you don't know what you're selling Tanner it's an M12 by 1.25 for the cart boy Botox bolts if anybody else wondered

      04BlobEyeSTi
        
      Was this answer helpful?
  • Q: torque specs  irvin78787812 years ago

    what is the torque specs on these? i can only seem to find an about number nothing for sure. what i found was 60 ft/lbs.
    • 0 of 0 people found the following answer helpful

      A:  Subaru Does not have a TQ spec for that location from the factory, however 60ft/lbs is the recommended spec that Kartboy states.

      Kirill C. @ RallySport Direct 12 years ago  
        
      Was this answer helpful?