Sparco Steering Wheel Hub - Subaru WRX/STI 2002-2014
Manufacturer Part # 01502033
Bundle Savings:MSRP: $85.00
RallySport Direct proudly carries those hard-to-find interior components brought toy ou by Sparco.
On this page, you are looking at the Sparco Steering Wheel Hub which has been designed to help you mount your Sparco Steering Wheel to your vehicle.
Here are the details:
- Adapts Sparco aftermarket racing steering wheels
- Designed for motorsports use and will get rid of the stock turn signal cancellation along with any features attached to the steering wheel
- The factory clock spring will need to be removed or the hub will need to be modified to accommodate the clock spring connector
- Comes provided with hardware, and an Allen tool making this hub ready for the installation
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
Spend the extra money and skip this one.
Lesac 3 years ago
I purchased the adapter for use on my Wrx swapped forester. My steering column is out of an 03 Wrx. The splines fit, and it looks good finished, however it took a TON of modifying to get to work properly. The only way to use it with the factory clock spring is to drill holes in it for the guide pins as well as cutting a large hole for the wiring to pass though. There is a small hole already but it is 4x too small. Also the center hub is too large to fit inside the center of the clock spring so it must be ground down to fit. I have it all modified and installed now and enjoy it, but would not recommend this part to anyone fitting it on a Subaru made in the last 20 years. The finish is so-so and you can see the chips in it on my picture. One good thing however, my hub came with holes drilled for both mono and nardi wheel patterns. They stock photos don't show that it does. Over all I'd say pass this one up and get something that fits better, unfortunately without spending a good chunk of money all of the ~$100 hubs will have the same problem.
Sparco after market service is crap
Rallys13 4 years ago
I bought this hub from rally. It didn't come with hardware I need. Rally says they will contact sparco for the missing hardware. Okay, I waited for like whole week, then surprise comes. Yes, Sparco indeed has sent me the hardware. I'd say hardware. No washer, not tool, ANNNND, only five bolts. WTF??? This is sparco deal with its customer. hardware in picture is 6bolts, tool and washer. I waited more than like two week, and I just got hub AND FIVE BOLTS. Don't buy it. Sparco thinks its band is well known and he can treat its customer like this. Let it know the rage of a random customer.
sdimex 5 years ago
be careful you will loose horn and cruise control and turn signal returner it does not fit oer that piece it all has to be removed headlight and wiper control remain intake but you will loose all else mentioned also you have to trin your plastic pieces that go over your steering colum if not and you tighten this all the way down like you should it pops and bends those pieces any ways and it make the steering wheel stay in what ever position you have it in definelty recomend for street cars but not for daily drivers stay away!
QUESTIONS & ANSWERS
Q: Required? the_man_14028683 2 years agoAnswer
I'm planning on getting a sparco steering wheel and quick release hub, do I require the sparco hub as well as the quick release?
A: You will need the hub, quick release, and steering wheel.
Chris W. 2 years ago
Q: Fitting Ravjit 3 years agoAnswer
Would this fit a 2004 Subaru Impreza RS 2.5L?
A: This is confirmed for the 2004 2.5RS.
Nick S. 3 years ago
Q: Hub adapter length Frozen 3 years agoAnswer
Can you tell me the mountet length and diameter of the hub? Tank you!
A: This hub is 4.25 inches wide, 3.25 inches in length.
Nick S. 3 years ago
Q: 2008 Subaru WRX 2.5L saftur 5 years agoAnswer
Will I loose functionality of my wipers and turn signals? I have a 2008 Subaru Impreza WRX 2.5L Sedan
A: You will not lose functionality of your turn signals and wipers. You will only lose function for the items currently placed on your steering wheel such as cruise control, stereo control etc... Anything behind the actual steering wheel assembly stays in tact.
Gabe S. 5 years ago
A: This piece does not replace the steering column so the wiper and turn signal stalks will remain. Any electronic controls on the steering wheel including airbag will have to be removed from the steering wheel.
Nick S. 5 years ago