SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Whiteline Steering Rack Bushings 30mm

MODEL # WHI KSR202

$46.39


  • Q: Shipping and fitment - WRX 2003  Jean29 days ago

    Hello. Do these fit on a 2003 WRX? Do you guys ship it to Brazil? Thanks.
  • Q: Fitment on 1999 Subaru Impreza 2.5 rs  Pheonix99RS9 months ago

    Will this fit my rs rack?
    • 0 of 0 people found the following answer helpful

      A:  Hello, Yes, Part # KSR202 has the correct bushings for your 2.5rs. If you have any further questions please feel free to call us at 909 476 2860.

      Whiteline @ Whiteline 9 months ago  
        
      Was this answer helpful?
  • Q: Fitment for 2003 subaru forester xs   Zander2 years ago

    Haven't seen an exact answer for proper part Fitment between #KSR200 or KSR202 on my vehicle . will I need a 25mm pass side bushing or a 30mm. Thanks
    • 0 of 0 people found the following answer helpful

      A:  You have to measure what size your OEM bushings are, Subaru put different sizes in each vehicle.

      Jared A. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: Bushings for 05 Impreza RS  05RS5 years ago

    Would these be the correct bushings for an 05 RS?
    • 0 of 0 people found the following answer helpful

      A:  These may fit a 2005 Impreza RS, but there was a change to the design in 2005 and we recommend that you inspect and verify which bushings you have before ordering.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Confirmed fitment for both 25mm and 30mm.  Frank01GC5 years ago

    I'm confused as to which bushings I should get my USDM 2001 2.5RS since both the 25mm and 30mm bushings are confirmed fitment. Any recommendations?
    • 0 of 0 people found the following answer helpful

      A:  It is recommended to measure your passenger side steering rack bushing to verify which bushings are correct for your car. We have found that Subaru was not consistent with their steering rack bushings in some older models.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  Both bushings are available for that chassis because Subaru produced that vehicle first with one size, then change to a different size in the middle of the production run. Although the VIN may tell the story, it is only helpful looking up OEM repalcement parts. It would easier (and more accurate) to measure the actual OEM bushing in the specfic car you are trying to replace. Yours may in fact be different from another USDM 2001 2.5RS.

      Whiteline @ Whiteline 2 years ago  
        
      Was this answer helpful?