Super Pro Rear Diff Crossmember Bushings
Subaru Models (inc. 2002-2007 WRX/STi)
Product Resources
Features & Product Details
RallySport Direct proudly carries a great selection of performance and chassis enhancements brought to you by Super Pro.
Here, you are looking at the Super Pro Rear Differential Crossmember Bushings. These bushings have been designed to help eliminate excessive movement of the rear differential front support.
DETAILS:
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
QUESTIONS & ANSWERS
-
Q: little nibbles thesynthiaharvey2 years ago
Will these help to eliminate minor scraping associated with a 3" driveshaft? It only makes contact when going over road imperfections at speed. Also, are these be used in conjunction with or instead of the kartboy crossmember bushing set?
-
-
1 of
1 people found the
following answer helpful
A: If the rubbing is caused by the rear diff moving around over road imperfections, causing the drive shaft to move excessively; these bushings can help. These would be in the same location as the Kartboy bushings though, so you could not use both.
Lane H. @ RallySport Direct 2 years ago
-
1 of
1 people found the
following answer helpful
-
Q: Location 1stRSbuild3 years ago
Not very clear where these go. Do these go between frame and rear cross member or do they on the 'outrigger' of the differential support? If they go with rear crossmember, shouldn't there be 4 bushings?
-
-
0 of
0 people found the
following answer helpful
A: They will go on the Diff "Outrigger" crossmember, and the 6 bushings are included to fill the voids in the OEM bushing. So the large single bushing will go on top of the factory bushing, then on the bottom, the large ring will fit into the outer void of the sotck bushing and the smaller ring will go in the more canter void. It's pretty clear when you take off the support plate and see the factory bushing. Hope this helps!
Rick C. @ RallySport Direct 3 years ago
-
0 of
0 people found the
following answer helpful
-
Q: Which is harder? Castro8 years ago
I currently have the Perrin SLS kit installed in my 06 Impreza Wagon. Do you know if these Beatrush Bushings are any harder or more supportive?
-
-
0 of
0 people found the
following answer helpful
A: These bushings and the Perrin bushings are both made out of urethane and one is not necessarily better or harder than the other.
Zach G. @ RallySport Direct 8 years ago
-
0 of
0 people found the
following answer helpful
-
Q: How To Install MrAguilarGc610 years ago
Witch Bushings Do i use For 01 Impreza 2.5rs
-
-
0 of
0 people found the
following answer helpful
A: These will fit your car, We also offer a very wide range of other bushings for your car. Simply use the filter located at the top of our site to narrow down products specifically for your vehicle.
Kirill C. @ RallySport Direct 10 years ago
-
0 of
0 people found the
following answer helpful