SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
Super Pro Front Trailing Arm Bushings
Subaru Models (inc. 2002-2007 WRX/STi)
Features & Product Details
RallySport Direct proudly carries a great selection of performance and chassis enhancements brought to you by Super Pro.
Here, you are looking at the Super Pro Front Trailing Arm Bushings. These bushings are made using durable urethane materials to replace the old rubber bushings in your vehicle to restore the handling and performance.
DETAILS:
Specifications
Brand:
Super Pro
Bushing Location:
Trailing Arms
Material:
Polyurethane
Mfgr. Warranty:
Lifetime Warranty
Condition:
New Product
Return Policy:
Standard
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
2 of 2 people found the following review helpful
5out of
5stars
MikeA
I just have to give this 5 star rating a huge difference in performance to my car. coming from a 254Kmiles OEM bushing you can actually feel the difference. Installation took 30min per side. As you know the hard part was remove the old bushing probably 1hr 30min per side. Right side OEM bushing i manage to pull it out using my 6 tons press, WD40 and heat from a heat gun and a little hammering. The Left side was a pain had to drill out the rubber surrounding the inner sleeve then I press out the inner sleeve using my press then using a metal saw had to cut the outer sleeve. once you made a single cut to the outer sleeve it will easily fall off. all in all it was fun :D
1 of 1 people found the following review helpful
4out of
5stars
Kattaclysm
Installed on my 2004 WRX wagon with many other suspension mods. Feels much more planted in all situations. Turn-in, cornering, exit, straight-aways, braking, acceleration. All of them. Took 3 hours to install with air tools, lift, and hydraulic press. This bushing has an inner race/sleeve which must be pressed out. (these are the ones that go in the arm)
5out of
5stars
rotareight13b58050
easy to install. car handle much better since I installed new poly bushings through out the rear suspension
QUESTIONS & ANSWERS
-
Q: Forester fitment Alex3 years ago
Is there a set that will fit the 03-08 Forester/FXT? I thought they were the same as the 04-07 STI and 02-07 WRX but I guess I'm wrong.
-
-
1 of
1 people found the
following answer helpful
A: The Whiteline kit (Part #WHIW61381A) for 02-07 WRX/STI is confirmed to fit the 03-08 Foresters so I would believe this kit will fit as well.
Jesse F. @ RallySport Direct 3 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Silly Q chappell94311 years ago
-
-
1 of
1 people found the
following answer helpful
A: Trailing Arm Front Bushings, so this would be the bushing that goes on the front of the trailing arm. The rear trailing arm bushings that go into the hub are purchased separate
Kirill C. @ RallySport Direct 11 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
