SET YOUR CAR
Buy Now, Pay Later! Starting at 0% APR
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Exedy OEM Replacement Clutch Kit

MODEL # EXE FJK1006

$206.86


  • Q: does this work with a pull type transmission?  04 forester XT4 months ago

    Will this work with a pull transmission or is it only for push style to release the pressure plate?
  • Q: Torque rating?  Nikoli 1 year ago

    My 04 wrx is tuned at 264 wheel tq. The stage one version of this clutch is rated for 300tq. Should I get this one or get the stage 1? I seem to be right in the middle
    • 0 of 0 people found the following answer helpful

      A:  This is not rated for any sort of HP other than stock. If you are making more than stock I would suggest the stage 1 kit you previously mentioned.

      Tyler A. @ RallySport Direct 1 year ago  
        
      Was this answer helpful?
  • Q: Subaru clutch kit  Jfigueroa3231 year ago

    Will this clutch kit fit a 2006 subaru wrx with ej255
    • 0 of 0 people found the following answer helpful

      A:  For any fitment questions please refer to the fitment chart located at the bottom of each product page. Or use the vehicle search filter at the top right corner of your screen.

      Tyler A. @ RallySport Direct 1 year ago  
        
      Was this answer helpful?
  • Q: Fitment  nag4251 year ago

    Will this clutch fit on an outback XT with an aftermarket flywheel? (not the factory dual mass flywheel) the outback has the same engine and transmission as the forester xt. Thanks for your help!
    • 0 of 0 people found the following answer helpful

      A:  This is not the correct clutch for the Outback XT's. Depending on the vehicles year, EXE FJK1001 is likely the clutch you need and will need to be paired with a WRX 06-07 light weight flywheel.

      Evan M. @ RallySport Direct 1 year ago  
        
      Was this answer helpful?
  • Q: Exedy clutch whats the difference?  BUGEYED2 years ago

    What is the difference between this clutch kit and the oem exedy clutch kit #EXE KSB03
    • 2 of 2 people found the following answer helpful

      A:  Differences between the kits are in the clutch disc dampers and pressure plate castings. The FJK1006 uses a single stage damper assembly on the clutch disc (1 set of springs) the KSB03 clutch disc uses our patented "Wide angle" damper assembly. The Wide angle damper has 3 different dampening ratios for idle, acceleration and deceleration. The wide angle damper is larger than the single stage damper used in the FJK1006, so the pressure plate casting for the pressure plate has a larger inner diameter to accommodate this. The clamping force is the same between the two clutch kits as well as the friction material compound used for the facings on the clutch discs. The KSB03 clutch kit should be used with a new flywheel for the 2002 model year WRX and cannot be used with any OEM flywheel that has been resurfaced (Subaru does not recommend resurfacing of the flywheels used in the WRX's however it is commonly practiced) as the disc could interfere with the crank bolts for the flywheel. The KSB03 is the superior kit and will provide better drive line harmonic absorption. The FJK1006 will perform the same but user may notice an increase in driveline harmonics if switching from the KSB03 kit. The FJK1006 is labeled as "economy" solely because it is cheaper than the KSB03 kit.

      Brady R @ RallySport Direct 2 years ago  
        
      Was this answer helpful?