SET YOUR CAR
Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts
Product images
Product Media
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
Community Media
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black (Part Number: )
PERRIN Reverse Lockout Lever Black
Subaru STI 2004+
Read 13 Reviews | 7 Q&As
Part # PSP-INR-250BK
$89.10
msrp: $99.00

In stock! Ships same day

Features & Product Details

Upgrade your shifter with the PERRIN Reverse Lock Lever. This design combines the OEM reverse lockout ring and the plastic boot holder into one part to make a cleaner and a more simple shifter. When used with the PERRIN Shift Knob.

Over time and mileage, the factory reverse lockout will wear out and could cause a rattle under aggressive shifting. PERRIN resolves this issue by incorporating 2 silicone O-rings to create a tight fit with smooth friction-free action. 

This unit has bee made of billet 6061 aluminum materials and will come in the anodized black finish. 

Specifications

Brand: PERRIN
Adjustable: No
Color: Black
Material: Aluminum
Mfgr. Warranty: 5 Years
Condition: New Product
Return Policy:

RallySport Guarantee - 30 Days


Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.

RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.

The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
RallySport Guarantee
WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED

REVIEWS & CUSTOMER MEDIA

13 Reviews
4.5 out of 5 Stars
5 Stars
(8)
4 Stars
(4)
3 Stars
(1)
2 Stars
(0)
1 Stars
(0)
Customer Photos and Videos
PERRIN Reverse Lockout Lever Black ( Part Number: PSP-INR-250BK)
PERRIN Reverse Lockout Lever Black ( Part Number: PSP-INR-250BK)
PERRIN Reverse Lockout Lever Black ( Part Number: PSP-INR-250BK)
PERRIN Reverse Lockout Lever Black ( Part Number: PSP-INR-250BK)
PERRIN Reverse Lockout Lever Black ( Part Number: PSP-INR-250BK)
PERRIN Reverse Lockout Lever Black ( Part Number: PSP-INR-250BK)
PERRIN Reverse Lockout Lever Black ( Part Number: PSP-INR-250BK)
PERRIN Reverse Lockout Lever Black ( Part Number: PSP-INR-250BK)
0 of 1 people found the following review helpful
Good buy  10 months ago
shiroikage
I had this installed the same time as the Kartboy shortshifter. I read that some customers had a problem with rattling with the factory reverse lockout when they installed the shortshifter. So I bought it to avoid any repetitious work for the install. I forgot to warn my mechanic about using the supplied grease, so the return is a bit slow, hopefully it'll loosen up over time. Other than that, it is a solid and better built than the factory piece which was quite worn on my 14 year old STi. My only regret is cosmetic, after purchasing the Perrin, I found that Raceseng makes an anodized red one, which would have looked better in my car, oh well.
  
Was this review helpful?
0 of 1 people found the following review helpful
Installing the Perrin Reverse Lockout Lever 1 year ago
Rally Armor OE Classics Mudflaps
The well constructed and precisely machined lockout lever has two O rings on the inside to prevent it from rattling once installed on the shifter. However, in some cases, it is not a simple "plug and play" install. It is important to note that some aftermarket shifters may have a slightly wider diameter and/or the plastic sleeve on the shifter may be thicker than what is found on the stock shifter. It will be necessary to sand the plastic sleeve with fine grit sandpaper to allow the Perrin reverse lockout lever to fit and smoothly slide on the shifter. Once that is done, the reverse lockout lever performs better than the stock lockout lever.
  
Was this review helpful?
0 of 1 people found the following review helpful
Perrin reverse lock out. 3 years ago
kingcobra1983
It was a straight forward install. Not too bad. Just make sure to put some grease where it will ride on. If you don't it won't slide back down on its own. I used a bearing grease.
  
Was this review helpful?
0 of 1 people found the following review helpful
Machined very nicely, slight fitment issue 3 years ago
csdel23584
Having an issue with it not wanting to slide back into place. It seems to be like a micron too narrow and I have to actually push it back into place. I'm going to try to replace the spring under the car with something heavier to see if that helps. Overall it's incredibly nice. Wish Subaru supplied something like this instead of the cheap plastic. The supplied grease is like glue, though. Actually made it worse.
  
Was this review helpful?
1 of 1 people found the following review helpful
No more rattling! 3 years ago
wickedkidm8029201
I got this because the stock lockout rattled so much, loud exhaust and drivetrain bushings must have caused it. It does its job and install wasn't bad at all. DO NOT USE the grease Perrin provides, it is way too sticky and tight. Use a normal all purpose grease and it will be fine. Also if you have a small enough philips head then you do not have to remove the shifter console.
  
Was this review helpful?

QUESTIONS & ANSWERS

  • Q: Fitment w/a Kartboy SS and Cobb Shift Knob  emummert53 years ago

    Are there any fitment issues with the Perrin Reverse Lockout on a '08 STi with a Kartboy Short Throw Shifter and a Cobb Shift knob?
  • Q: This is for ... ??  Heartless823 years ago

    I'm sorry but i don't understand the reason to install this ... someone can explain me? Thanks ! ;)
  • Q: Plans to release this for the 2015 WRX  ubersoph4 years ago

    Or Perrin have you tested this for fitment on that car? The 2015 WRX has a nasty tedency to rattle from this assembly from 2nd to 3rd gear and it's driving me nuts!
    • 0 of 1 people found the following answer helpful

      A:  This has not been confirmed for the WRX models yet unfortunately but it is possible it may fit. We cannot guarantee fitment at this time.

      Nick S. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Wrx  Dan Harper5 years ago

    Would this fit the cobb short throw for the 11 wrx or is there something else on the market to hold the shift boot up when using an aftermarket knob
  • Q: fitment compared to OEM  Alec5 years ago

    i have an aftermarket knob (flossy) and was wondering if the part that slides up into the knob when going into reverse is to the same specs as OEM. Or in other words, is it aftermarket knob friendly?
    • 0 of 0 people found the following answer helpful

      A:  If your shift knob works with the OEM unit, it will work with the PERRIN unit.

      Perrin Performance @ PERRIN 5 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  This lever will work with any shift knob that is compatible with the stock reverse lock out lever.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?

This Part Fits