SET YOUR CAR
Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts
Product images
Product Media
Kartboy Shifter and Bearing Kit (Part Number: )
Kartboy Shifter and Bearing Kit (Part Number: )
Kartboy Shifter and Bearing Kit (Part Number: )
Kartboy Shifter and Bearing Kit (Part Number: )
Kartboy Shifter and Bearing Kit (Part Number: )
Kartboy Shifter and Bearing Kit (Part Number: )
Kartboy Shifter and Bearing Kit (Part Number: )
Kartboy Shifter and Bearing Kit (Part Number: )
Community Media
Kartboy Shifter and Bearing Kit (Part Number: )
Kartboy Shifter and Bearing Kit
Subaru WRX 2015+
Read 7 Reviews | 8 Q&As
Part # KB-20-WRX
$115.00

In stock! Ships same day

Features & Product Details

RallySport Direct carries a great selection of Kartboy Products for those of you looking to upgrade your drivetrain or suspension.

On this page, you are looking at the Kartboy Shifter and Bearing Kit. 

Here are the details:

  • Counterweighted to provide a short and solid feel
  • Shifter throws will be reduced by 38%
  • Works with OEM and STI shifters
  • Specifications

    Brand: Kartboy
    Adjustable: No
    Bushings Included: Yes
    Installation Hardware Included: Yes
    Mfgr. Warranty: Limited Lifetime Warranty
    Condition: New Product
    Return Policy:

    RallySport Guarantee - 30 Days


    Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.

    RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.

    The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
    RallySport Guarantee

    PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED

    REVIEWS & CUSTOMER MEDIA

    7 Reviews
    4.9 out of 5 Stars
    5 Stars
    (6)
    4 Stars
    (1)
    3 Stars
    (0)
    2 Stars
    (0)
    1 Stars
    (0)
    Customer Photos and Videos
    Kartboy Shifter and Bearing Kit ( Part Number: KB-20-WRX)
    Well made, works great 10 months ago
    DeputyMatt
    I had a Kartboy shifter in my first WRX, an '02 I bought new in 2001, and loved it. Glad to see their quality is still top notch. Everything went together perfectly. The throw is incredibly short and precise. Huge improvement over what was already a decent shifter. Thanks to RallySportDirect for the install video. It was very useful since this kit came without any instructions. That would be my only knock, instructions would be very helpful.
      
    Was this review helpful?
    If you have made it this far, Do It  1 year ago
    17wrxmethinj.
    This is the type of mod where having the right tools helps tremendously. 3/16 roll pin punch and a pneumatic palm nailer both from amazon and this took like an hour, maybe less. This alone makes the shifts nice and tight front to back. Combining this with a shift stop, a transmission mount, and maybe a heavy shift knob (preference) really makes things awesome.
      
    Was this review helpful?
    Fantastic 1 year ago
    andymd
    Awesome upgrade, especially with the Cable Shifter Stop. The plate install is entirely under the car and you have to remove a bunch of stuff to get to it. The only difficult part is the pin that you have to hammer out with a punch. Make sure you get two punches of good quality because it's REALLY hard to get that thing out. You can fit a 7/32 punch in there, but 1/4 is too big. The punch will start to mushroom a bit, depending on the quality. Seems like I hammered that thing out for close to an hour. Putting it back in isn't as bad--just make sure you watch a couple videos on the install first. This plate weighs probably less than half of the OEM plate and it creates a nice, stiff, notchy feel that you will love. I'll probably experiment with a heavier shift knob just for fun, but it's really not needed.
      
    Was this review helpful?
    The best mod done to my car yet. 2 years ago
    Elostorm77
    Normally I don't do review, but I felt this kit was worth it. It makes the stock shifter feel better and shorter than the sti short shifter. The build quality is top notch and the install was straight forward and easy. At first its it seams hard to shift, but and you get used to it and will love it. You wont regret this purchase.
      
    Was this review helpful?
    Works Good! 3 years ago
    Castro
    There are not a lot of detailed instructions for this part. The two washers, nut and bolt are used to press the bearing into the shifter cable eye. You will need to remove the front transmission cross member to gain access for punching the roll pin. when you apply the bearing to the lever, remember to remove the bottom bolt for the lower shift cable bracket and loosen the top bolt on that same bracket. This will allow you to move the shift cable enough to slide the bearing onto the shift pin with ease. Otherwise you will be trying to install it at a slight angle and will not go on correctly. Now... This part feels pretty damn good. My first mod on my 2016 WRX and many more to come.
      
    Was this review helpful?

    QUESTIONS & ANSWERS

    • Q: Work with the Boomba Short Shifter?  SirBrass2 months ago

      Will this kit work with the Boomba short shifter lever as well?
      • 1 of 1 people found the following answer helpful

        A:  This will work in conjunction with the Boomba shifter lever but will not work with the Boomba short shift plate.

        Karsten B. @ RallySport Direct 2 months ago  
          
        Was this answer helpful?
    • Q: Bearing  Matt8 months ago

      Is the bearing in this kit the same thing as Perrin brass shifter bushing PSP-INR-016? Also, does Kartboy offer this kit without the shift stop for those of us with a different unit?
      • 0 of 0 people found the following answer helpful

        A:  The bearing included here is not the same as that Perrin Bushing. To purchase the kit separately you will need part numbers: KAR KB-003-B , KAR KB-003LOC

        Christian B. @ RallySport Direct 5 months ago  
          
        Was this answer helpful?
    • Q: Shift stop?  jjscrivener9 months ago

      Does this kit include the Kartboy shift stop? It's shown in the product photo, but not listed in the description.
    • Q: Perrin shift stop  vash_241987728642 years ago

      I have a Perrin shift stop installed, would it cause any problems with the kart boy shirt shifter?
      • 0 of 0 people found the following answer helpful

        A:  This would work well in addition to Perrin's Shift Stop and there will be not issues/problems.

        Brady R @ RallySport Direct 2 years ago  
          
        Was this answer helpful?
    • Q: Does this shifter replace the same part as the Perrin short shifter adapter?  fordtruck762 years ago

      Does this shifter replace the same part as the Perrin short shifter adapter? Does one function better than the other?
      • 0 of 0 people found the following answer helpful

        A:  This is essentially the same as the Perrin adapter. Both work quite well and will have similar performance.

        Josh P. @ RallySport Direct 2 years ago  
          
        Was this answer helpful?