- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Crawford TMIC V2 Air Oil Separator Black
Subaru WRX/STi 2002-2007
Features & Product Details
RallySport Direct proudly carries a great selection of performance modifications aimed to improve your driving experience by Crawford Performance.
This is the Crawford Performance Single Chamber V2 Air Oil Separator Kit. This air/oil separator kit has been designed for those who are still utilizing the top mount intercooler setup. This air/oil separator kit has been designed to help reduce detonation and to reduce the risk of engine failure. This kit is a great solution to your application's notorious oiling system issues and is the result of extensive engineering and testing using the best materials available.
DETAILS:
FITMENT NOTES:
Product Video
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
the quality of the products where amazing but with the 02 wrx wagon I cant run my whiteline swaybar with the also the crankcase connector and hose are in a very difficult spot for installing the tmic and putting the hose on my turbo inlet broke my turbo inlet other that it does what its supposed too for 350 id expect a little better fitment
I recently installed this aos on my 06 wrx with a big turboxs tmic. Installation was smooth sailing all the way to the end. Only complaint I have is when I went to put the tmic back on it didn’t want to seat right because of one of the lines underneath. I’d be willing to bet the installation would be easier with stock/sti parts(what it’s designed for). All in all excellent product, didn’t come with installation instructions but Crawford does have them on their website. All in all 5/5
After installing it in my 2002 wrx hybrid motor,I felt the difference in performance and just regular driving .I felt no more shaking at low RPM, love it would buy it again.
I love this AOS, all the hoses that came were the right sizes and everything fit as it should. But there were a couple negatives to this product that I haven't seen anywhere on any of the install guides. For my 2004 wrx, where the aos is located, in the back passenger side of the engine bay is where my cruise control was located so that needed to be removed to fit the aos. This wasn't a huge deal because I rarely use it but it is a slight inconvenience
Before I picked up this I did have a Grimmspeed aos. Did not like that, it gunked up at the aos and oil fill hole. With the Grimmspeed I did notice oil still in my intake as well as smoke during cold starts. After installing this Crawford that cold start smoke slowly went away. Love how it feels in your hand, quality made. What I like most is how it has a built in heater core to keep the blow by from gunking up and sludging the breather lines.
QUESTIONS & ANSWERS
-
Q: V3 for 07 WRX? B1RDD0G11 months ago
No V3 for an 07 WRX?
-
-
0 of
0 people found the
following answer helpful
A: Nope, not yet anyway. Thanks.
Rick C. @ RallySport Direct 11 months agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment Gio11 months ago
-
-
0 of
0 people found the
following answer helpful
A: IT's certainly not made for the FXT, but I would imagine you could get it to work with some modification. Of course we would not be able to guarantee fitment, so any modifications done would be all on you. Thanks!
Rick C. @ RallySport Direct 11 months agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 02 wrx wagon cruise control relocation JS2 years ago
-
-
0 of
0 people found the
following answer helpful
A: It would require a bracket to relocate the cruise control system, this kit does not include one.
Marcus E. @ RallySport Direct 2 years agoWas this answer helpful? -
0 of
0 people found the
following answer helpful
A: I relocated my cruise control by bolting it to the back of my Cobb SF air box. The cruise control now sits near where the boost control solenoid usually lives. I'm using a Cobb 3 port BCS and everything fits. No wires were cut and the only holes drilled are in the airbox. The cruise control cable makes a couple of sweeping bends and it works perfectly. I also made a simple, sheet metal bracket to mount the AOS, it's from a different car, and that let me relocate the AOS farther forward so I could keep the SPT strut bar.
Yosemite WRX
Was this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Powder coating inside AOS Nate2 years ago
-
-
0 of
0 people found the
following answer helpful
A: This is the first time I had ever heard of this, this is not an issue you will have with this aos.
Devan M. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Crawford TMIC V2 AOS F1fan4802 years ago
-
-
0 of
0 people found the
following answer helpful
A: Yes it is, and no, it does not require a tune.
Crawford PerformanceWas this answer helpful?
-
0 of
0 people found the
following answer helpful
