SET YOUR CAR
As low as 0% APR - Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Mishimoto Performance Aluminum Radiator Manual Transmission

MODEL # MIS MMRAD-WRX-01

$285.00


  • Q: Cap  frank.2 months ago

    So do I use the expansion tank cap on the radiator and the mishimoto cap on the tank? Or does the expansion tank cap not work either?
    • 0 of 0 people found the following answer helpful

      A:  I cannot confirm if the expansion tank cap would work, however this radiator includes it's own cap, no need to buy separately.

      Devan M. @ RallySport Direct 2 months ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  So I can use the mishimoto cap on the radiator then?

      frank. @
        
      Was this answer helpful?
    • 1 of 1 people found the following answer helpful

      A:  I would just use the cap included in this kit.

      Devan M. @ RallySport Direct 2 months ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  Doesn't it say to not use the cap on the radiator though?

      frank. @
        
      Was this answer helpful?
  • Q: Mishimoto radiator 03 wrx  Bugeyejeremy926 months ago

    2003 wrx stock radiator has no filler neck. Metal cooling pipe has 1 outlet that feeds into overflow... was the black nipple supplied by mishimoto supposed to go over the filler neck on new radiator as shown? Or am I supposed to get a metal cooling pipe with 2 openings and rum an extra hose to it ? Thank you.
    • 0 of 0 people found the following answer helpful

      A:  It appears that you are using the cap correctly. Please feel free to contact us directly if you experience issues.

      Christian B. @ RallySport Direct 3 months ago  
        
      Was this answer helpful?
  • Q: Radiator cap  sm5000592886 months ago

    In the description, it says that the cap provided isn't for the radiator but it's for the expansion tank. Which Mishimoto radiator cap is meant for this radiator?
  • Q: Will this fit ?  Meady2132 years ago

    will this radiator directly fit into a 2004 Rs Impreza 2.5L ?
  • Q: Swapped GC  marioava11083 years ago

    Is this the correct radiator for a 2001 GC Impreza with an EJ207 engine only swap?
    • 0 of 0 people found the following answer helpful

      A:  This radiator will not be a direct fit in a 2001 Impreza because the mounts are in different locations, and the stock fans will not mount the same way. You may be able to make it work, but some modification will be necessary.

      Zach G. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Hoses  3 years ago

    Can I use the original hoses the OEM radiator came with?
    • 0 of 0 people found the following answer helpful

      A:  The stock radiator hoses can be used with this radiator, but the upper hose may need to be trimmed.

      Zach G. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Radiator cap replacement   iankirby46306853 years ago

    Will the stock radiator cap for an 02 wrx work with this radiator? From the reviews it looks like this cap is not the best and I would like to have the replacement here for when the radiator arrives. If the stock cap does not work, what would be a good replacement for this cap?
    • 0 of 0 people found the following answer helpful

      A:  This radiator does come with the high pressure 1.3 bar Mishimoto radiator cap but if you decide not to use this cap or use your oem cap, a good replacement would be part # KOY SK-C13

      guest569558ee2a8d252b708e85a3 @
        
      Was this answer helpful?
  • Q: Radiator shroud  bbishop308455833 years ago

    Will the Custco radiator shroud work with this or do I need to modify?
    • 0 of 0 people found the following answer helpful

      A:  It should work, but we are not able to confirm it as we have not tested that combination

      guest56ad69792a8d256e198b66b5 @
        
      Was this answer helpful?
  • Q: radiator cap  srdjan.strbac3 years ago

    Just wondering if the cap that this comes with is equivalent to the 1.3bar cap that mishimotto sells on your page. please let me know, thank you!
    • 0 of 0 people found the following answer helpful

      A:  Yes, included is Mishimoto's standard 1.3bar cap.

      ryanw20299728
        
      Was this answer helpful?
  • Q: 02 WRX  jeffpnguyen633374 years ago

    I have an 02 WRX and the OEM rad doesn't have a radiator cap on it. How do I install the Mishimoto rad which does have a radiator cap?
    • 0 of 0 people found the following answer helpful

      A:  A simple modification will need to be done to the overflow coolant line. The details of this modification can be found here: http://forums.nasioc.com/forums/showpost.php?p=27904629&postcount=44

      guest56ad69792a8d256e198b66b5 @
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  For 2002-2003 Subaru WRX models built before 7/2002, remove fill neck overflow nipple and replace with 1/16 NPT plug provided.

      Mishimoto @ Mishimoto 4 years ago  
        
      Was this answer helpful?
  • Q: will the oem fans fit?   kyle686edward440484 years ago

    i understand this is an oem replacement in which case i would assume the answer is yes but its better to be safe.
  • Q: 4eat compatible  WRXguy20054 years ago

    i have a 05 WRX 4eat with ton of mods makes 330whp and i need a radiator will this work? note i have a external transmission cooler
    • 0 of 0 people found the following answer helpful

      A:  This is only for manual cars unfortunately.

      guest56ad69792a8d256e198b66b5 @
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  If you have an external transmission cooler as you state this works just fine with the 4EAT. I mounted my cooler in front of the radiator and while it is a tight fit, it all works wonderfully.

      bwileyhedrick
        
      Was this answer helpful?
  • Q: Hose fitment  Phanly4 years ago

    Will oem subaru upper and lower hoses fit this mishimoto radiator
  • Q: Fitment  dtapia34358274 years ago

    Im looking for all the specs of this radiator. I mainly need to know if the upper part of the radiator, where the hose attaches, is thicker than the OEM radiator.
    • 1 of 1 people found the following answer helpful

      A:  Overall Size:28.4 x 17.2 x 2.15 Core Size:13.54 x 27.24 Rows:2 Inlet:1.5 Outlet:1.5 Core Thickness:1.65 Tank Wall Thickness:.08 Fill Neck:1.25 Drain Plug Thread Size:(M16) .06 Drain Plug Thread Length: .047

      Kirill C. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: water Temp  Max_Boost4 years ago

    is there a place on this radiator to install a water temp sensor?
  • Q: In the box  Drouinmike311614 years ago

    A bit of an odd question, but does this product come with a Mishimoto sticker?
  • Q: Water temp sensor  gvn.stewart4 years ago

    Does this Radiator, or any on RSD come with a bung for a water temp sensor in them or would you have to buy MIS MMWHS-32-BK to hack into MIS MMHOSE-WRX-01BK? seems like an awful waste when there could be a bung right in the radiator, all clean and fresh.
    • 1 of 1 people found the following answer helpful

      A:  This radiator does not have a bung for a temperature sensor, but the Koyo Racing radiator has a 1/8NPT threaded bung intended for a temperature sensor.

      Zach G. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: advantage   Diirty_Subi5 years ago

    whats the difference and advantage between this radiator and Mishimoto Performance Aluminum Radiator X-Line other than $100 bucks? future mods are turbo upgrade
    • 1 of 1 people found the following answer helpful

      A:  The X line radiator has a thicker core, which offers more capacity for better cooling in extreme conditions.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: which radiator shroud fits this radiator?  YOkev5 years ago

    was wondering what radiator shroud fits this radiator ? thanks
    • 0 of 0 people found the following answer helpful

      A:  Any radiator shroud designed to fit on the OEM 02-07 WRX/STI radiator should fit. Thank you.

      tempemail55c523d5caae525b088b4bb3 @
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  I bought the Perrin radiator shroud and it did not fit

      Dellavecchia
        
      Was this answer helpful?