SET YOUR CAR
Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Koyo Aluminum Racing Radiator Manual Transmission

MODEL # KOY VH091672

$293.04


  • Q: Radiator shroud   ss2ride772518 months ago

    Will this fit with an aftermarket radiator shroud, specifically the beatrush one?
    • 0 of 0 people found the following answer helpful

      A:  We would not be able to confirm fitment with the Beatrush radiator shroud.

      Luis L. @ RallySport Direct 8 months ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  I can confirm it fits with the beatrush radiator shroud with no trimming needed.

      Noodle_dude @
        
      Was this answer helpful?
  • Q: Cores?  Stealthlead1 year ago

    How many cores does this radiator have?
    • 0 of 0 people found the following answer helpful

      A:  Part# VH091672, as well as every other all-aluminum radiator we currently offer for Subaru vehicles all have two row cores. VH091672 also has the benefit of having our high density core, which has more fins and tubes per inch resulting in a slimmer radiator but with similar or better efficiency than many three row standard density radiators currently on the market. Let us know if you have any further questions. Thank you.

      Tyler A. @ RallySport Direct 1 year ago  
        
      Was this answer helpful?
  • Q: Cooling  2 years ago

    I have a nearly stock legacy 3.0r and was wondering if this had the capabilities to cool a 3.0l engine? Thanks
  • Q: Coolant temp gauge  littotaq807502 years ago

    Does this have the NPT fitting for the coolant gauge sensor to thread into?
  • Q: Antifreeze fill up  Solano302940282 years ago

    How much fluid will i need to top this system out?
  • Q: Anything else needed to install this?  drivingoutback562212 years ago

    Looking for more cooling.... is the 1.3 bar cap recommended or do I need anything else, any recommendations suggested to along with this?? Thanks.
    • 0 of 0 people found the following answer helpful

      A:  If you plan on running the cooling system at the higher 1.3bar pressure, you will need 2 1.3bar caps. I would also recommend getting new radiator hoses.

      Josh P. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: NPT  littotaq807503 years ago

    Are you selling the old or new style of these radiators? I'm looking for the one with the 1/8" NPT fitting.
    • 0 of 0 people found the following answer helpful

      A:  This is the newer style with the 1/8NPT fitting. All newer Koyo radiators will be the newer style at this point.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Drain cock thread pattern?  gregroot1985214 years ago

    As the title asks, what is the thread pattern on the drain cock there in the side? Guessing it is probably the same as OEM possibly but I'd rather ask.
    • 0 of 0 people found the following answer helpful

      A:  We do not have the exact thread pitch available, but this unit does reuse existing OEM hardware.

      Nick S. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: A/C Condenser  wavespy664 years ago

    Any known issues fitting the factory A/C condenser and peripherals?
    • 0 of 0 people found the following answer helpful

      A:  This is confirmed as a drop in replacement with slightly more volume and cooling capacity and should work fine with the stock A/C cooler.

      Nick S. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Overall measurements?  gregroot1985215 years ago

    What are the overall measurements on this? Trying to figure out what size of radiator & fan shroud I'd get for it before I buy. Thanks!
    • 0 of 0 people found the following answer helpful

      A:  This radiator will be nearly identical to stock in terms of height and width. The core is 13.4in x 25.5in and the endtanks are slightly larger than stock.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  Not necessary, All the stock fans and shrouds will fit perfectly! And probably better than anything else.

      Fidrat
        
      Was this answer helpful?
  • Q: Fmic  Tlud5 years ago

    Will this radiator fit with the aps FMIC?
    • 1 of 1 people found the following answer helpful

      A:  This radiator will fit with any FMIC that is compatible with the stock radiator, including the APS FMIC.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: use with carving shroud  nate5 years ago

    Will this work with the carving radiator shroud? part number CAR CBR-WRX
  • Q: koyo rad  metaldrumcore6 years ago

    I have an 04 WRX and i just want to make sure this is the hyper v series one. Also i cant seem to find anywhere (forums or here) that state what hardware is needed with this since it doesn't come with any (size and how many). Thanks in advanced.
    • 0 of 0 people found the following answer helpful

      A:  This is the V series :) Direct factory bolt on, so you use stock hardware to transfer fans.

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  Unless things changed in 04 the screws for the fan shroud are self tapping into the plastic. They will NOT work on aluminum. The good news is the right screws (lock washers too) come WITH the Koyorad. It least mine did. All you will need is a cap, although my stock one fit fine.

      Fidrat
        
      Was this answer helpful?
  • Q: grimm  compton.wrx078646 years ago

    will the grimmspeed cooling plate w/ tool tray work with this radiator? thanks
    • 0 of 0 people found the following answer helpful

      A:  Grimmspeed has confirmed that their radiator shrouds will work with this Koyo racing radiator.

      Zach G. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: fan screws  rotten rod6 years ago

    someone mentioned thet the stock fan screws have a different thread pitch... Does RSD sell the rite screws for re mounting the fans??? Or does it come with them?
    • 0 of 0 people found the following answer helpful

      A:  This radiator does not include any mounting hardware, but you can reuse your OEM hardware to mount the fans.

      Zach G. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Fans  Racefreak1566 years ago

    Can i use the stock fans on this radiator?
    • 0 of 0 people found the following answer helpful

      A:  Yes this is designed to use the stock fans. Just please remember to trim the radiator hoses accordingly to make up for the extra thickness of the radiator core.

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Thickness?  Frank01GC6 years ago

    Is this radiator thicker than the oem one? Meaning that i will either have to buy new hoses or trim them?
    • 0 of 0 people found the following answer helpful

      A:  The actual radiator core is thicker but the endtanks are the same size and in the same position. So your stock hoses will work fine.

      Dru P. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?