We couldn't find any results
- Use different keywords
- Double check your spelling
- Start with something less specific - you can refine your search results later
- Try changing some of your filters below:
Process West Top Mount Intercooler w/Shroud Kit
Subaru WRX 2004-2007 / STI 2006-2007
Features & Product Details
A common error that people can make when upgrading their intercooler is not installing a properly sized splitter. The benefit of a larger intercooler is that the large surface area can rapidly disperse heat. However when utilizing the stock splitter, the intercoolers effective surface area can be drastically reduced.
Another mistake is completely eliminating the splitter which allows air to escape around the intercooler instead of going through the core. The lack of air flowing through the core will cause the intercooler to heat up, making the intake charge warmer potentially causing heat soak issues, and reducing power.
The Process West Top Mount Intercooler Shroud Kit is available for consumers to provide more air flow to your intercooler. With this intercooler shroud kit, more surface area coverage to the intercooler will be provided with forced air straight to the core of the intercooler which will lower charge temps which will result in increased power.
The Top Mount Intercooler Shroud is fabricated from high-grade steel, and features precisions welds, and has been powder-coated black to remain corrosion resistant. Weather stripping is installed on all 4 sides of the intercooler shroud to create a proper sealing surface between the shroud and the intercooler and keeps the high-pressure zone within the intercooler.
This splitter is designed specifically for the Process West Top Mount Intercooler, however, this unit can work with other brands of intercoolers but we are not able to confirm fitment.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Purchased this combo after much research, The quality is incredible, installation is a bit harder than putting your stock TMIC back on due to size. You do have to finesse it into place while watching your hard lines and others. I like the design of the integrated Y pipe being made into the inter cooler - 2 less gaskets to replace ! This TMIC was added to the new Blouch 16GXT, I am more than curious to get it on the dyno and see what the increase will be with the addition of the new parts. As far as the splitter goes - another quality piece. A bit of a pita to install due to the lower 3 mounting screws being a bit obscured by the size of the rear vane. The seal is spot on, at least eyeballing it while closing the hood. Overall I am happy with this so far. Please note the 4 star performance is just prelim, as we have not been able to tune and dyno yet, I will update when I can.