SET YOUR CAR
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
PERRIN Pitch Stop Brace
Subaru WRX/STI 2015+
Features & Product Details
RallySport Direct carries a great selection of aftermarket performance products brought to you by PERRIN Performance.
If you are experiencing excessive engine movement in your vehicle, then it would be a great idea to upgrade to the PERRIN Pitch Stop Brace. This brace has been designed to reinforce the factory brackets that connect the pitch stop to the car. It has been proven that under even normal driving conditions, the brackets will flex and will eventually cause damage to the pitch stop brackets. This has become a common problem in the 2015 models, and it will only get worse if you decide to modify the car to have substantial increases in power where the added torque will create more movement. You could risk breaking the brackets right off the firewall.
Included with the PERRIN Pitch Stop Brace is a stainless steel clutch line. This line cleans up the engine bay and provides a faster response to the pedal. And for further reinforcement, a Clutch Master Cylinder Brace is included. All bracing has been fabricated from 6061 billet aluminum and will come in a black anodized finish with laser engraved PERRIN logos.
DETAILS:
Specifications
Brand:
PERRIN
Color:
Black
Material:
Aluminum
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
2 of 2 people found the following review helpful
5out of
5stars
JK
2015-2016 years have a very weak firewall bracket that could fail under spirited sessions and at the track when you push them. This piece will reinforce both sides and will reduce the chance of your firewall bracket failing/tearing off. If your planing on upgrading your pitch stop mount, do not do so until you upgrade your engine mounts and transmission mount. The install is not fun and will require you to bleed your fluid, but will give you piece of mind knowing your bracket will not fail.
1 of 1 people found the following review helpful
4out of
5stars
Edgardo
The install could be somewhat tedious, but its well worth it in the end. Our cars , 2015 wrx have weak points and unfortunately this is one that must be addressed before upgrading the pitch mount. Well made product no doubt!
2 of 2 people found the following review helpful
4out of
5stars
No
I attempted to install the pitch stop mount and got held up by a packaging error. Although I had checked the parts list against what I had, I neglected to notice the adapter for the clutch m/c line was missing. It was not listed on the parts inventory on the instructions though. I should've looked more closely at the clutch line to insure it was there but in my defense read the previous sentence again. Called Perrin, they said to call Rallysportdirect because that was where I bought it. In production/packaging it's typically a group that goes bad from human error so I doubt I was first to call with the same problem considering it was out of stock for a couple months and once they were back in stock a lot of kits must have been shipped in tandem with mine from the same production/packaging run missing the part. I'm assuming (and I know what can happen when you assume) Perrin was probably aware of the issue so it would have been nice for them to just send me the part.. Called Rallysportdirect and they said they would email Perrin. Getting to that point was tough because the rep I got on the phone couldn't understand what part I was missing with the instructions right in front of him. He was patient and professional but the lack of technical knowledge was apparent and he should have gotten someone on the phone with me that possessed more of it. I would have felt more taken care of if he put me on hold and called Perrin to start the process of getting me the part immediately. It was common for the company I used to work for to do so in order to expedite missing parts in kits from manufacturers. That company is in the performance aftermarket industry as well and I speak from 9 years of experience with them. Rallysportdirect and Perrin may have to resolve situations such as this through email for a trail to be created for reference/records/data analysis for improvements, etc. and I get that but be a little more human and a little less robotic in procedures for people whose days have been ruined by the brand you sell and represent. Within 4 hours Rallysportdirect emailed me the part was on the way from Perrin so a good job by all. Got the part and continued the install to only discover the 3 bolts provided to attach the brace to the firewall were too short. Luckily I have a 'box of bolts' that provided the correct length hardware. So in closing I would say the product was great quality and pretty basic to install as well as a decent Customer Service experience from Rallysportdirect. Make sure you have the adapter screwed into the clutch line and the bolts are longer than the ones in the picture. There HAVE been reports in the past of the incorrect length bolts for this part so it seems Perrin has still not attempted to or successfully rectified that issue in some circumstances. Regrettably, mine!
QUESTIONS & ANSWERS
-
Q: Clutch Line uurx2 years ago
Can this kit work with the Cusco stainless clutch line as I already have the Cusco line installed? If so, can this kit be priced and purchased without the Perrin clutch line?
-
-
0 of
0 people found the
following answer helpful
A: Perrin only sells this with their clutch line. We have not tested this with the Cusco line, but it should work with it.
Lane H. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment Marco3 years ago
-
-
0 of
0 people found the
following answer helpful
A: It should work with other pitch stop mounts without a problem. Just so long as they are OEM fitment. Thanks!
Rick C. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: PERRIN Pitch Stop Brace choppa873 years ago
-
-
0 of
0 people found the
following answer helpful
A: It will fit your vehicle. We can not confirm fitment for 2 different brands
Johnny M. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Karboy Pitch Stop Mount R224 years ago
-
-
1 of
1 people found the
following answer helpful
A: while i personally can't confirm cross fitment on parts, I still don't see a reason that it would not fit. You should be just fine.
Cody B. @ RallySport Direct 4 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Perrin pitch mount brace years Ryan4 years ago
-
-
0 of
0 people found the
following answer helpful
A: They do not.
Devan M. @ RallySport Direct 4 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
