- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Process West Front Mount Intercooler Kit Black
Subaru STI 2008-2014
Product Resources
Features & Product Details
RallySport Direct carries some of the best performance intercooler kits brought to you by Process West. Process West designs and manufactures their intercooler to be durable while being effective when producing better performance and intercooler efficiency.
Here, you are looking at the Process West Front Mount Intercooler Kit. If you have performed modifications that increase the horsepower or the boost, then your factory top mount intercooler risks getting heat soaked which will limit the potential of the rest of your modifications. The front mount intercooler core provides a larger area surface coverage to properly cool the intake charge temperatures routing to the intake and turbocharger.
DETAILS:
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
QUESTIONS & ANSWERS
-
Q: 2008 WRX STI EJ257 Mhernandez6014 years ago
Will I need to purchase any other parts, to mount this on my vehicle?
-
-
0 of
0 people found the
following answer helpful
A: You will need an after market cold air intake to give clearance for the intercooler piping
Process West @ Process West 4 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: cold air intake fitment cruzcontrol.musubi7 years ago
-
-
0 of
0 people found the
following answer helpful
A: We haven't been able to confirm that those two products will work together. If your intake sits in the path of intercooler piping, then it will not work and will need a different intake.
Chris W. @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Bumper beam? Jbsmith7 years ago
-
-
1 of
1 people found the
following answer helpful
A: Process West does not offer a bumper beam for the 08-14 STI at this time, and it is not possible to order one from them.
Zach G. @ RallySport Direct 7 years agoWas this answer helpful? -
1 of
1 people found the
following answer helpful
A: I apologize. That was the Perrin that does. So how do you mount the process west?
JbsmithWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: 2012 STI thrallfornoone324228 years ago
-
-
0 of
0 people found the
following answer helpful
A: The intercooler piping attaches to the stock turbo and will also work with aftermarket stock location turbos. The bumper cover will need to be trimmed approximately 3 inches. We cannot guarantee fitment with any intake other than Process West, but most short ram intakes should be compatible and most coil air intakes are not.
Zach G. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 2014 sti Felt.anthony460908 years ago
-
-
0 of
0 people found the
following answer helpful
A: Tuning is generally not necessary for intercoolers unless you already have a custom tune. If you are using the stock tune, then you can just bolt this on and go, but you would gain more power from a custom tune.
Zach G. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
