Defi Red Racer Pressure Gauge Imperial 52mm 140 PSI - Universal
Manufacturer Part # DF06602
RallySport Direct is proud to supply the car enthusiast with a large selection of Defi Gauges. Defi Gauges have been the number one choice for aftermarket gauges that are utilized by those who participate in all varieties of motorsports that include drifting, drag racing, time attack, and circuit racing. They are known best for their quick operation, and both fit and finish. Choose the right gauge that will suit your application.
On this page, you are looking at the Defi Imperial Red Racer 52mm Pressure Gauge. This particular gauge reads up to 140 PSI in US metric measurements. This gauge features high-brightness LEDs, a self-diagnostic function that monitors both sensor disconnection and short-circuiting during the startup sequence. And the face will perform a full 270° sweep upon startup. The heart of the operation of this gauge is a stepping motor that provides a fast and smooth operation.
Note that the Defi Racer Gauge does not require the Defi-Link Control Unit II for use, and cannot be used in conjunction with it.
Included in this kit will be:
Included in this kit will be:
Pressure sensor (1/8PT) 1pc
Sensor wire (8 1/5ft) 1pc
Power supply wire (3 1/3ft) 1pc
Meter cup 1pc
Regular position bezel 1pc
Double sided tape 1pc
Mounting bracket 1pc
M4 bolt, nut, washer 1pc
Tapping screw 2pcs
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
Vaughn 8 months ago
Gauge is nearly a direct match to my oem gauges. If only the needle was white. And now 2+ years later they come out with one that actually has a white needle...
Jsuey 1 year ago
This guage is spot on!! Easy to install and looks great with my others!!
ptak11 3 years ago
Installed this at the 10 O clock position on my cluster hood, had enough wiring to reach there no problem. Ran the sensor wires down inside the fender and through the grommet that is by the dead pedal. Install wasn't too bad, gauge works great and is easily visible in bright day light but not blinding at night either. I kept my stock dummy light sensor and ran the new defi sender with a nickel plated brass T I picked up at a local hard ware shop. Worked great with some thread sealant. Anyone looking for a great oil pressure gauge to match the oem color scheme should get this one.
case.eg98131 4 years ago
Had a few niggles with the install, but a solid gauge once it's properly set up. Only complaint is that the sensor wire barely reached from the oil sandwich to the rubber grommet in my driver-side fender. A little more slack would've been welcomed.
QUESTIONS & ANSWERS
Q: Deco pressure gauge BraxtonLefler 3 months agoAnswer
What does this gauge measure?
A: This gauge can measure oil pressure, boost, or fuel pressure.
Jared A. 3 months ago
Q: does it work with the FRS / or brz? ghostop86 3 years agoAnswer
Does kit work FRS / BRZ thanks in advance
A: Gauges are universal and fitment can never be guaranteed. This kit included everything you should need for a standard installation.
guest569faaee2a8d2517038b4568 3 years ago
Q: Does this gauge have an alarm? akasathefox84082 3 years agoAnswer
Does this gauge have an audible or otherwise bright flashing light as an alarm in case oil pressure drops? If so, how can a threshold be set?
A: It does not have an alarm or flashing light. The face of the gauge spins so that you can set the triangle where you would like to as an indicator.
guest57853c642a8d25b5018c44a7 3 years ago
Q: Red triangle marker BRZZEE 3 years agoAnswer
Just making certain. The outer bezel with marker rotates by hand? Thanks
A: The outer bezel with the red triangle can be rotated by hand and it can also be removed.
Zach G. 3 years ago
Q: fitment charlieholtzclaw2464317 4 years agoAnswer
ok, so i read a few and my question was still in the dark, dose this guage fit right into the OEM oil pressure sensor under the alternator?
A: It will not fit in the galley plug do to the PT vs NPT thread differences.
Kirill C. 4 years ago
A: I think Kirill's response is incorrect. Please see below: The galley plugs in the engine block are BSPT The DEFI oil pressure sensor is BSPT The DEFI oil temperature sensor in Farenhiet is NPT The DEFI oil temperature sensor in Celcius is BSPT. BSPT and NPT are not the same. BSPT and PT are the same thing. Source: http://forums.nasioc.com/forums/showthread.php?t=1294742
Asharus 4 years ago
A: DEFI Imperial series gauges come with Imperial threaded fittings. Metric gauges come with metric fittings, so that is the reason for my answer of PT vs NPT
Kirill C. 4 years ago
A: For my 2011 WRX this sensor fit perfectly into the OEM oil pressure sensor location under the alternator. Installed it with a little Teflon tape and a short 17mm (if memory serves) open ended wrench.
QWKWRX 4 years ago
This Part Fits
This item is non application specific.
Please verify compatibility before purchase. May require some modification for proper installation.