Proto Tuning Tool Holder / Mount Black ( Part Number:PRT P1001-BLK)

Proto Tuning Tool Holder / Mount Black

Part #: PRT P1001-BLK


Brand: Proto
Color: Black
Gauge Size: N/A
Material: Plastic

Condition: New Product
Return Policy:

RallySport Guarantee - 30 Days

Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.

RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.

The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
RallySport Guarantee
The Proto Tuning Tool Holder / Mount is the answer everyone has been searching for whether they realize it or not. This mount allows you to mount your handheld tuning tool using a permanent adhesive pad or a vent clip. Utilizing a ball and cup style mount you can angle it any way you want. Your handheld tuning tool just snaps into the bracket so removing it is a breeze.

This Proto Tuning Tool Holder has been confirmed to fit the COBB Tuning Accessport.



Love it...
theBLUElanternR 4 months ago
This thing works great, but I think I've lost the permanent ball mount. I've only been using the vent clip. Now that I've decided to make it a bit more permanent, I was hoping to order a replacement so I can get the ball mount. Is there a way to just get the ball mount? Especially seeing as this is discontinued...
Verified Purchase

Great mount
M.Orndorf7 3 years ago
This mount works great! It was a very easy install and fits the Cobb AP perfectly!
Verified Purchase

Excellent product and fit!
SubaruGirardi 3 years ago
The clip and design is incredible and holds the AP perfectly on my vent on the dash. Very worth the money
Verified Purchase

Does what is should
thielni30068 3 years ago
I am using the vent clip and am happy with the firm grip this piece has on the vent. The stiffness of the adjustable articulator si just fine and the fitment of the holder on the Accessport is good as well. As a note, I would recommend planning on integrating a switch to your setup for night driving as the computer display is pretty bright and with a permanent mount you will want to be able to turn the computer on and off easily since it is by default always on. Overall quality is good to very good. Metal would make it better, but maybe not much value story there.
Verified Purchase

Junk dont buy!
2013 rex 3 years ago
The clip end is too flimsy to hold to ap securely to either the defroster or ac vent. Tool kept falling off (while stopped and while driving on smooth roads). Also the ball on the back of the cradle piece snapped off while remounting it to the car one day. So i put the sticky side of the dash mount where the ball used to be and the clip end on the other side to make it work. Then today the clip snapped, go figure. Now its useless all together. Long story short, couldn't mount the ap to the car without it falling off and the plastic broke in 2 places while trying to but it back on...

  • Q: V3?  WRXWagonPSM 3 years ago


    Will this work with the Cobb V3? The adhesive that came with mine is not holding up well at all.

    • A: This will not work with the V3 due to the V3 being a significantly larger unit.

      Kirill C. 3 years ago
  • Q: V3 fittment??  Matthewpaulgeorge66238 3 years ago


    will this mount be able to fit the Accessport V3?

    • A: This mount is not correct for the V3 AccessPort and would not hold it properly.

      Zach G. 3 years ago
  • Q: Where can i hide the wire  easton_palmer60524 4 years ago


    Where can I hide the wire? Figured I would try and ask on here so if anyone can help that would be great!

    • A: Some people will try to route it through their air vent. That is the best way unless you wanted to modify the dash, although routing like that will make it a bit permanent.

      Stevens Henager 4 years ago
  • Q: AP Holder  turkeylord 4 years ago


    Is the back of the AP holder flat if you remove the ball mount? I'm thinking of mounting just the holder on my ProClip mount. And if so is there any way to buy the holder separately?

    • A: If you remove the swivel ball the back of the holder will be flat. We can only order this as a full kit and cannot sell the holder separately.

      Zach G. 4 years ago
  • Q: Ball mount  ajburrington18454 5 years ago


    What size in diameter are the balls on the ball mounts. I am looking at getting a third party suction cup ball mount for the holder but they come in different sizes.

    • A: 16mm is the ball size

      Kirill C. 5 years ago