SET YOUR CAR
Buy Now, Pay Later! Starting at 0% APR
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

ATI Triple Meter Center Dash Pod

MODEL # ATI CLUST-25EJ-5

$152.99


  • Q: Fitment on SG Foresters?  KzooBrad9 months ago

    Does anyone know about fitment on the SG Forrester (2007 FXT Sports)? Is it the same dash as a 2007 Impreza?
  • Q: 60mm prosport  malkabenjamin3 years ago

    Would 3, 60mm prosport EVO series digital gauges fit?
    • 0 of 0 people found the following answer helpful

      A:  Yes, this pod will work for both 52mm and 60mm Gauges. On the back on the gauge pod, there are pop-out provisions allowing you to easily modify this pod if you desire to install 60mm gauges.

      Brady R @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: 60mm gauges   szucchet652983 years ago

    so Im trying to fit 60mm defi racer gauges into this pod but they are loose. In the box only 3 52mm rubber installation rings are found. any suggestions? do they offer 60mm rubber installation rings?
    • 0 of 0 people found the following answer helpful

      A:  60mm gauges should fit just fine. This pod uses pop outs on the back of the mounting plate to allow for the larger 60mm gauges. Unfortunately bands specifically for 60mm gauges are not available. It may be advisable to use material to fill the void around the gauges to solve the issue of the gauges being loose.

      Josh P. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Right hand drive  Zeus3 years ago

    Would the display orientation be correct for a right hand drive Subaru?
  • Q: LaMco fitment  03sonicwrx4 years ago

    will the lamco guages fit? i know there smaller then 52mm i think there around 45mm?
  • Q: Facing direction  NBillett094 years ago

    When installed, will the gauges face straight out from the pod or do they tilt towards the driver? Living in Australia means my STI is RHD, so it would be a bit silly if the gauged faced the passenger.
    • 1 of 1 people found the following answer helpful

      A:  The gauges will face straight out from the pod :)

      Brady R. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  Great. I'm an Aussie too and was just about to order my pod and thinking the same. Cheers

      Manonelly
        
      Was this answer helpful?
  • Q: Forester 04?  Jrkomo5 years ago

    Any more knowledge if this will fit an 04 forester?
    • 0 of 0 people found the following answer helpful

      A:  We have not tested this on any Foresters and we do not have any experience with the Forester fitment.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Triple Defi Racer fitment  klavs696125 years ago

    Does this pod have enough room for 3 Defi 52 mm racer gauges with the original bezel?
    • 0 of 0 people found the following answer helpful

      A:  This pod is compatible with Defi Racer Series gauges and you should be able to install 3 of them with no problems.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Fitment for a 04 wrx  Mangel2076 years ago

    Almost positive it will fit my 04 wrx but just want to be positive before purchase
  • Q: Do they do one to suit a RHD GC8?  zeroyon223038176 years ago

    As above, looking for a 3 gauge pod for my GC8 type R, is a version 5 with the facelift dash. Currently has the factory lamco pod by the gauges are too small to fit anything else.
    • 0 of 0 people found the following answer helpful

      A:  Unfortunately ATI does not make a center dash pod for the GC8 or right hand drive cars at this time.

      Zach G. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: 02 Impreza rs  tylelis534886 years ago

    This should fit an 02 impreza rs right? I believe the interior is identical almost to a WRX.
  • Q: 01 Impreza 2.5 RS fitment  jtf93088285026 years ago

    Will this gauge pod fit a 2001 Impreza 2.5 RS?
  • Q: 02 Forester fitment  pigboat_97 years ago

    Will this gauge pod fit an 02 Forester?
    • 0 of 0 people found the following answer helpful

      A:  This pod is designed to replace the stock clock pod on the WRX and STI so it is highly unlikely it will work on the Forester. Thanks.

      guest5633b7522a8d259b038ba50d @
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  We have heard that this pod also fits some Forrester models but we are not certain. We have not verified it ourselves so please be cautious if you are trying to fit this application on models others than the ones we have intended them for. Thanks very much.

      ATI Gauge Solutions @ ATI 7 years ago  
        
      Was this answer helpful?
  • Q: visibility  Hottirocket8 years ago

    what is the visibility level of the gauges while driving? i can understand having a boost gauge mounted on the steering wheel so its just a quick glance down, how is it's legibility mid-boost?
    • 2 of 2 people found the following answer helpful

      A:  This gauge pod from ATI does a great job at placing the gauges in a very accessible spot with the eyes without putting them directly in your line of vision which would possibly distract you. They did a great job placing the gauges far enough in the pod as well to keep any possible glare from headlights or sunlight from interferring. What you may want to do to see if you think this pod would be what you are looking for is while driving pay attention to your clock on the dash and how well you can see it while looking forward and how little effort it takes to glance to the right slightly while still being able to keep your attention on the road.

      Tanner S. @ RallySport Direct 8 years ago  
        
      Was this answer helpful?