Bundle Savings:MSRP: $74.00
RallySport Direct proudly carries a great selection of quality interior components and accessories brought to you by ATI.
On this page, you are looking at the ATI 60mm Single Gauge Pod. This is a great option for those of you who only want to mount 1 gauge.
Here are the details:
- Fits on the dash to the left of the cluster hood
- Hosts 1 60mm gauge
- Wires of the gauge will run down the defrost vent
- Black textured finish closely matches the OEM surface of the interior
- Installs using double-sided tape
- Fits LHD vehicles only
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
ATI Single Gauge Pod
VB2013WRX 3 months ago
I got this for the SPT boost gauge since I didn't like the cup style mount it comes with. I used it along with ATI's 52mm adaptor and I really like the look and fit. I do agree with the other reviews that the mounting tape that comes with isn't enough to keep it on the dash, so I used to small bolts to mount it to the gauge cluster cover.
msasbah40361 3 years ago
The gauge angle is odd and don't get fooled by this 3M dual sided tape - it wont hold it (perhaps it could hold the empty pod, but once you put a gauge in it - get ready for some custom mounts... I drilled two holes in the base of it and used 3mm screws (through and through)... holds perfectly. Fits well with custom pod, yet now I have a mix of colors on my dash...
the_newt 5 years ago
It's a mass produced plastic piece that is supposed to cleanly sit on a complex 3d shape. It kind of does but the tape they give you is completely worthless. Throw it away then go to autozone or a hobby shop and get 3M double sided tape about 1/2 wide and secure it to the dash with that. We used the Greddy Multi D/A gauge so we had to dremel the hole out a bit but the gauge fit fine despite being 62mm instead of 60.
Just what I wanted
Serialk1llr 5 years ago
Before purchasing this, I combed the web for pictures and other peoples reviews. Research what you buy before and you won't be surprised. For me, this was a little snug fitting my 60mm Defi gauge in, but with a quick 3min file job to shave off just a pinch of the opening, and a little saliva, gaube popped right in and is snug as a bug. Plenty of room behind the gauge to stuff all the extra wire length from Defi. All in all, I'm a happy customer.
Don't waste your money.
drew.w 5 years ago
The material looked decent and looked okay on the dash, the mating edges were not contoured well, leaving gaps and needed to be heated for a better fit. When the gauge was installed it had a very odd position with somewhat of a downward angle. I had no luck with the included adhesive or high strength 3M adhesive holding this to the dash. I ended up using the Defi cup and mount that was included with the gauge, I recommend staying away from this one.
QUESTIONS & ANSWERS
Q: fitment newman_repairs93169 4 years agoAnswer
do you do a right hand drive one yet
A: ATI does not offer this pod for right hand drive vehicles at this time.
Zach G. 4 years ago
Q: Question about how to install? mrbuddy2629551 5 years agoAnswer
Does the gauge pod screw in? Or 3m double side tape? And is it hard to install?
A: It uses a double sided adhesive to install, if you look at the 2nd to last image you will see the included tape. Install is easy, and is a simple install. The hard part would be for you to run wires to it and hooking up the gauge properly
Kirill C. 5 years ago
Q: Fitment bgreenfi8793318 5 years agoAnswer
How well does the gauge pod fit the contours of the dash? I've heard that other ATI pods don't fit very well.
A: This pod actually seems to fit very well. On our STi we did not notice any gaps or imperfections and seemed to fit great. Thanks.
Rick C. 5 years ago
Q: 52mm gauge pod a77chang36918 5 years agoAnswer
Any chance ATI going to make the 52mm one?
A: ATI has not mentioned anything about making a 52mm version of this pod, but they do have adapter rings that will allow you to install a 52mm gauge in a 60mm pod. The part number is 52/60-CONV for the adapters, and you can type that in the search bar to view them.
Zach G. 5 years ago