Beatrush Forged Pitching Stopper Mount - Subaru Models (inc. 2002+ WRX/STI)
Manufacturer Part # S146010BC-AD
Bundle Savings:MSRP: $146.00
As low as $469.58
Beatrush has crafted a beautiful addition to your engine bay with their Forged Pitching Stopper Mount. These are lightweight, super strong, and can handle the additional back and forth movement caused by mild to extreme modifications you have performed.
The factory OEM pitch stop mount is a softer unit that allows excess movement in the drivetrain. With the Beatrush unit, you will experience smoother throttle response, and a more secure drivetrain. Track tested for functionality by Beatrush of Japan.
This will come in the gold finish.
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
Dnguye 1 month ago
Easy install torque to spec or else you'll be spinning. NVH isn't bad gives you that race feeling I can hear the transmission more. Also can hear the engine crank a lot louder at start but it's nothing terrible. Only mount I have and can definitely feel the power to the wheels a lot better. High quality piece definitely recommend from stock
Best pitch stop out there.
Chase 6 months ago
Same sermon dofferent Sunday? Not anymore! This pitch stop mount has been a priceless addition to my Subaru (98 impreza daily driven). Acceleration and take offs are cleaner and quicker and doenshifts and deceleration are waay quicker and smoother. Also when revving high the engine doesnt make this shaking sound that it did before either! This is the HIGHEST quality pitch stop you will find ANYWHERE. Forged aluminum (40× stronger than regular CNC) , high quality 90a urethane bushings, and a superior design for the highest strength and rigidity to weight ratio possible. Aside from just this mount i can recoomend beatrush as a whole. DO THIS 'mod' before adding any more power to your subaru or before driving it hard! I chose this over the perrin and kartboy ones. NVH isnt too much to discard. It sounds a little more "onboard". The real noise difference is turning the car on, and how much cleaner and alive it sounds and feels in the higher rpm's!
Beatrush Pitch Stopper
teecherless 2 years ago
Improved throttle responds, braking, and clutch feel. Less rattle when shifting, braking, and acceleration. I highly recommend this product.
Beautiful piece, easiest install, almost no drawbacks
boon 2 years ago
seriously even this piece which is supposedly the stiffest you can get is barely anything. gear whine isn't a big deal. engine start (starter motor) sounds literally like its behind the stereo and ONLY noticeable with windows up. windows down and you can't hear it at start up. I installed this piece first of the trifecta and this did clean up the shifts by about 20-30% it does make initial shifts and then when you accelerate firmer but not by a huge amount. you can definitely tell there's something different I guess i would say it feels less floaty? must have piece and I just purchased the beatrush engine mounts from RSD and will install that as soon as i get it on a weekend.
QUESTIONS & ANSWERS
Q: If require one or two davidstubanas 10 months agoAnswer
Does install require one or two to be purchased?
A: Just one will be needed, this will replace the single mount on the back side of your Subaru motor.
Evan M. 10 months ago
Q: Durometer rating??? SneakyFish 3 years agoAnswer
What is the durometer for the bushing?
A: 90a durometer rating
Beatrush 3 years ago
Q: 2015 WRX Pitch Stop Brakaston84410 4 years agoAnswer
What are the torque specs for this one?
A: The torque specs are to be installed exactly as OEM.
Nick S. 4 years ago
Q: Worth the extra $? Tmanjustice49570 5 years agoAnswer
Is this stronger than the kartboy or the other beatrush? Or just lighter? Why the higher price?
A: We have not compared this mount to the Kartboy pitch stop, so I can't comment on the strength comparison. This is a solid piece of forged aluminum which is stronger and stiffer than the other Beatrush pitch stop, but it does cost more to manufacture and that is why the cost is higher.
Zach G. 5 years ago
Q: Installation GIJosh2687 6 years agoAnswer
I am assuming the intercooler needs to come off for this upgrade, and good references or tips on doing so?
A: The top mount intercooler will need to be removed if you have one. The only tips for removing the intercooler are take pics of everything before removing parts and have plenty of patience.
Zach G. 6 years ago