SET YOUR CAR
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
PERRIN Wheel Spacers 5x100 25mm Black Pair
Subaru Models (inc. 2002-2014 WRX)
Features & Product Details
RallySport Direct carries a great selection of aftermarket performance products brought to you by PERRIN Performance.
These are the PERRIN Performance Wheel Spacers. Wheel spacers are a great way to get more clearance from your custom wheels and your brake calipers, and they also make a great option for those of you who want a cleaner, flushed look when it comes to your wheels and your fenders.
DETAILS:
Specifications
Brand:
PERRIN
Bolt Pattern:
5x100mm
QTY:
2
Spacer Thickness:
25mm
Type of Mount:
Hub Centric
Material:
Aluminum/Magnesium Alloy
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
1out of
5stars
Ossie
I bought these for my BRZ. I put them on the car in October. In march I changed over to summer wheels and found that a stud was sheared off from the back on the spacer. Perrin offered a replacement stud/ bolt as the resolution to the failure..... They consider it "normal wear". Dont buy these- they are potentially dangerous.
4out of
5stars
Oh-Six
After reading the reviews I had my fenders rolled before installation. No issues with rubbing and I got the look I was searching for. However, Perrin could put a bit more in their quality control of the lugs on this product. The ends of the threads are not cleaned up very well and if you are using aluminum lug nuts beware! I would strongly recommend taking the appropriate die to the threads and clean them up before exposing you expensive aluminum lug nuts to them. Overall I love the look and feel with these installed, and of course the great service from the team at Rallysport Direct!
5 of 7 people found the following review helpful
4out of
5stars
wolfpacksti31636
I bought these spacers for my 2004 STI and instantly didn't like the look. I was going for flush but these pushed out a little beyond that. Went for a spin around the block and the wheel-on-fender rub was pretty bad. No big deal though, I thought, I'll just pack these bad boys back up and send to Rally Sport since they have a 100% Satisfaction guarantee. Well apparently that only applies if you change your mind and never open the packaging. How are you supposed to know if your 100% satisfied if you don't try it on? I tired them on once, uninstalled, they're in the exact same condition they were shipped, all in its original packaging and Rally Sport would not take them back. Now I'm stuck with $300 worth of unwanted spacers. Kinda feel like the 100% satisfaction guarantee is misleading and bogus. Anyway, buyer beware, make sure you are absolutely sure these will fit with your setup before you buy.
1 of 1 people found the following review helpful
5out of
5stars
StealthSTI
Fast shipping, exactly what I was looking! I doubted how much of a difference these would make astetically but boy I was wrong! Be sure to buy a bottle of anti-seize if you buy these so you can easily take them off later down the road for whatever reason you may run into. Well worth the money!!!
5out of
5stars
Mac_4919
I'm really glad I picked these up instead of eBay junk. These are actually hub centric unlike most other spacers I have seen. I would recommend to anyone that these are worth it if you plan to run spacers.
QUESTIONS & ANSWERS
-
Q: Required lug nuts? JohnnyB6 years ago
Would open ended lug nuts be required for wheel to spacer installation? Thanks
-
-
1 of
1 people found the
following answer helpful
A: The length of the studs is going to be very close to the OEM hub. It is likely you can use either open ended or close ended lug nuts depending on the design.
Connor M. @ RallySport Direct 6 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: 08 wrx gh8 (sedan) Wrex 7 years ago
-
-
1 of
1 people found the
following answer helpful
A: You shouldn't have any fitment issues with a stock setup.
Chris W. @ RallySport Direct 7 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Extended wheel studs open ended lugs lmccargar393706277 years ago
-
-
1 of
1 people found the
following answer helpful
A: Extended studs will likely not fit using this spacers since the studs from the hub of your vehicle poke through the spacer, then the spacers are bolted to the hub.
Nick S. @ RallySport Direct 7 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Balancing Borderguy7 years ago
-
-
0 of
0 people found the
following answer helpful
A: We haven't had any reports of shaking with these. For any reason you a problem comes up, make sure to give us a call.
Trevor C. @ RallySport Direct 7 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 5x100 perrin spacers with stock close ended lugs Larrallen138 years ago
-
-
1 of
1 people found the
following answer helpful
A: The studs that come with the PERRIN Wheel Spacers are about the same length as stock, so the stock lugnuts can still be used. The total stud length is 29mm for the threads
Brady R @ RallySport Direct 8 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
This Part Fits
Toyota 86
Base
2019 Toyota 86 Base
GT
2019 Toyota 86 GT
TRD Special Edition
2019 Toyota 86 TRD Special Edition
