- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
PERRIN Turbo Inlet Hose Blue
Subaru WRX 2008-2014 / Legacy GT 2005-2009 / Forester XT 2009-2012
Features & Product Details
RallySport Direct carries a great selection of aftermarket performance products brought to you by PERRIN Performance.
Here, you are looking at the PERRIN Performance Turbo Inlet Hose. This is an excellent upgrade for those of you who need to replace your factory inlet hose. It is common over time and mileage for your factory inlet hose to develop cracks around the worm clamp connections or around the various hose connections which will cause boost leaks and will certainly hinder your performance.
DETAILS:
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Ughh... But you need this thing so you don't ever have to do it again. Its not really that hard of an install with some wd-40. and about 3 hours. I'm not a mechanic but with the you tube video I pulled it off and it looks great. On a Legacy GT.
I read all the reviews and pains people went through to install this tube. And although it's not an easy install it didn't seem as bad as I imagined. The hardest part was getting it to seat and stay on the turbo while clamping it. The instructions were pretty good and the quality is great. I installed this along with intercooler and I wish I didn't wait so long. Power seems to come on much quicker and at lower rpm.
I bought this for my 2009 Subaru WRX. I did the install myself, it took a little longer than I anticipated. Getting the hoses to fit back on was kind of a PITA. Could notice the difference right away. A good buy if you have other supporting mods done.
The install is definitely a pain but well worth it. I went with a larger turbo and this has kept my boost coming in at low rpm. Almost responsive as stock. Highly recommend.
Excellent piece, took 2 hours to install, iv never done an inlet hose before so it wasn't to bad. The instruction were great easy to follow. The hardest part was hooking all the little hoses back up. I had to trim my Cobb sf intake hose to fit properly but other than that it was great , thanks rsd for a great product !!
QUESTIONS & ANSWERS
-
Q: '12 WRX - 18g turbo 8 years ago
will this fit a tomioka td05-18g turbo setup?
-
-
1 of
1 people found the
following answer helpful
A: We do not carry the Tomioka and could not confirm. As long as it uses a stock sized turbo inlet hose it should fit.
Stevens Henager @ RallySport Direct 8 years agoWas this answer helpful? -
1 of
1 people found the
following answer helpful
A: I have the Tomioka 18g and I just paired this inlet hose to it.
staind78182518Was this answer helpful? -
0 of
0 people found the
following answer helpful
A: I have the Tomioka 18g and I just paired this inlet hose to it.
staind78182518Was this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Interference pjkolosha9 years ago
-
-
1 of
1 people found the
following answer helpful
A: This is confirmed to fit with your vehicle without a problem. Perrin states in their instructions regarding the power steering line; Due to the PERRIN inlet hose being larger diameter than the OEM inlet hose, it may touch on the intake manifold and power steering pressure line. This is completely normal and nothing to worry about. The multi layer silicone hose is very resistant to abrasion type wear.
Nick S. @ RallySport Direct 9 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: AVO 450 fitment pjkolosha9 years ago
-
-
1 of
1 people found the
following answer helpful
A: As long as the turbo is a OEM inlet size, this should work!
Brady R. @ RallySport Direct 9 years agoWas this answer helpful?
-
1 of
1 people found the
following answer helpful
-
Q: Catless tr3y.1990256979 years ago
-
-
0 of
0 people found the
following answer helpful
A: This inlet should not have an effect on over-boosting.
guest56ad69792a8d256e198b66b5 @Was this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment SubaruGirardi9 years ago
-
-
2 of
2 people found the
following answer helpful
A: This inlet is a direct replacement for stock and can be used with any intake that is compatible with the stock inlet, including the Cobb intake.
Zach G. @ RallySport Direct 9 years agoWas this answer helpful?
-
2 of
2 people found the
following answer helpful
