- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
PERRIN Cold Air Intake Red
Subaru WRX 2008-2014 / STI 2008-2015
Features & Product Details
RallySport Direct proudly carries a great selection of quality aftermarket performance products brought to you by PERRIN Performance.
This is the PERRIN Performance Cold Air intake. This has been designed to be a performance modification that will increase horsepower, and torque, as well as improve the throttle response while reducing the turbo lag. This is achieved through the design that provides the turbocharger with a larger volume of unobstructed airflow to allow the turbo to breathe much easier to produce the performance.
DETAILS:
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
I ran this without a tune for a few weeks car was fine. But make sure everything else is stock. Only down side is I had to get a protune for it because COBB does not have a OTS tune for it. If you want more turbo noise get it!
Great Service from the Rallysportdirect Team. Easy to install and arrived promptly!
filter looked great installed till I went to mount the PERRIN FMIC. the filter is too large. After looking over PERRINs site I noticed there is another filter that is needed for a FMIC install called 'Universal application 2.75" I.D. inlet filter, 9" length.' My understanding is its about 2 inches shorter and will allow the FMIC tubes to fit without any issues.
I chose the Perrin intake based off a recommendation and am very pleased. The simplistic design is exactly what I was looking for and the build quality is equally impressive. The sound is excellent and it seems to give me a little better turbo response.
Easy install and sounds amazing. Can feel the power gain right away after install.
QUESTIONS & ANSWERS
-
Q: Perrin intake with big sf Cobb tune Squidywap3 years ago
Can I run the big sf tune with the Perrin intake from a Cobb off the shelf map
-
-
2 of
2 people found the
following answer helpful
A: You would not need a tune to run this intake
Johnny M. @ RallySport Direct 3 years agoWas this answer helpful?
-
2 of
2 people found the
following answer helpful
-
Q: Tuning sleevedout757 years ago
-
-
0 of
0 people found the
following answer helpful
A: Perrin states that you do not need a tune with this intake, which is why we have it listed as such on the Specs section. However, we always recommend tuning your car after installing an intake. You risk having the car run too lean with the added airflow the intake provides.
Josh P. @ RallySport Direct 7 years agoWas this answer helpful? -
1 of
1 people found the
following answer helpful
A: you CAN run this part without a tune
e chavezWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: California approved Melbelle8 years ago
-
-
0 of
0 people found the
following answer helpful
A: This intake does have a CARB Exemption number but you will have to make sure the exemption is for the vehicle you are purchasing for.
Nick S. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: FMIC thales farias8 years ago
-
-
0 of
0 people found the
following answer helpful
A: Yes, the Perrin cold air intake will fit with the Perrin front mount intercooler.
Was this answer helpful? -
0 of
0 people found the
following answer helpful
A: I need a 3 cold air intake...but I guess this is 2,75, can you recommend any other 3 intake that fits perrin's FMIC? thanks
thales fariasWas this answer helpful? -
0 of
0 people found the
following answer helpful
A: This doesn’t fit at all which is surprising. The cai piping and filter bulge out the inner fender liner which in turn causes rub and in my case the need for new fender liners. We tried every adjustment possible and this doesn’t fit with a Perrin FMIC. My next step is replacing the now torn liner and having my local shop fab me up a CAI extension to replace the fender pipe that’s causing every issue. Perrin was contacted and I’m awaiting a response...
Psi MikeWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 2015 Legacy kaopealii8 years ago
-
-
0 of
0 people found the
following answer helpful
A: Unfortunately, we cannot confirm fitment for 2015 Subaru Legacy models and currently have no listings for any confirmed items. We apologize for any inconvenience.
Brady R. @ RallySport Direct 8 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
