Bundle Savings:MSRP: $513.00
This oil pan works with almost all headers and all are fit and leak tested before leaving Killer B Motorsport. There have been reported issues of fitment issues with some Invidia headers, but not all.
Each pan comes with an OEM sized drain port as well as one 1/2" NPT Port. You will need to get a plug for the NPT port if you don't plan on using a quick drain valve or anything else.
OEM Belly pan will need to have a small piece trimmed on some models.
Turbo EJ20 engines will need to change to the STi dipstick and tube or simply mark the old dipstick with a new full mark.
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
zathras2011 9 months ago
Quality is top shelf but installation is difficult. I paid to have it installed as I didn't want to goof up and suffer oil leaks. My installer finally go it to fit with difficulty. Totally problem free once installed
trustorey1699383 3 years ago
Can't think of a reason not to go with Killer B! As said before quality is obvious over OEM and other aftermarket stuff out there. USA, USA! And a big thank you to RSD for wonderful service!
Much better quality than OEM
Tairy Hesticles 3 years ago
It doesn't take a mechanical engineering student like myself to see that the quality of the Killer B pan is vastly better than the OEM pan. Not only is it perfectly tig-welded together, but the overall thickness and construction of the pan is WAY better. I even see that the mating surface was slightly oversized to give a better, long-lasting seal. Fitment was exactly perfect, along with the baffle and oil pickup I also installed. Instructions were a little off, but it's because my car was a 2012 sti and the instructions were for an older one. Only difference was you have to temporarily move the air pump to get to the oil pan dipstick bolt that's on the driver's side head (underneath air pump). Make sure to temporarily remove the driver's-side OEM header heatshield and lower header bolt, as they'll be in the way when installing the pan. You can put them back on when the pan is on there. A+ quality overall.
Awesome oil pan
AJ G. 4 years ago
Thai is a very high quality oil pan. All of the welds are done very well and is much stronger than an oem oil pan. Installed with pick up tube and baffle plate, everything was included and looks great. One thing to know is if its going on an 02-04 wrx then you'll need to get a new dipstick from a 2.5( the one with a hook handle) or your oil readings will be wrong and could cause issues.
gustavo 4 years ago
Just perfect as always. Thank you RSD for your great service.
Q: Killer b pan fitment lupe_solis6546035 8 months agoAnswer
Will the killer b oil pan fit the 2015 sti with the plastic OEM belly pan cover or will I need to cut it for perfect fitment?
A: As stated in the product description, you may need to trim the undercover to get a good fit.
Josh P. 8 months ago
Q: Gasket skillgun7411473 1 year agoAnswer
Is there any sort of gasket out there or do I just use gasket maker like they do from the factory?
A: This is designed to use the Subabond from factory.
Brady R 1 year ago
A: There is no traditional gasket needed. Threebond, HondaBond, FujiBond and appropriate Permatex products will do the job just fine. Be sure the mating surfaces are clean and follow the instructions for set and cure times.
[email protected] 1 year ago
Q: oil cooler fitment szucchet65298 2 years agoAnswer
would this oil pan have any clearance issue with mishimoto thermostatic oil cooler sandwich plate
A: We've not test fit that product, but other brands are known to work.
[email protected] 2 years ago
Q: sti dipstick AND tube? hella flush is hella stupid 2 years agoAnswer
I understand you need a sti dipstick for turbo ej20 motors but do you need the tube too? I thought they were the same? Also, it can be any year sti right? Thanks
A: The OEM part numbers for 02-07 WRX and STI tubes are the same, so you don't need to change the tube. The dipstick can be from a 04-14 STI or 06-14 WRX.
Zach G. 2 years ago