SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
Tanabe DF210 Spring Kit
Subaru STI 2008-2014 / WRX 2011-2014
Features & Product Details
The DF210 coil spring offers a large drop, while retaining superb ride quality characteristics. The spring rate is raised to compensate for the shortened amount of suspension travel. The DF210 is unique in that it provides an excellent range of benefits, from its extremely low stance, to performance and comfort. Overall, the DF210 is extremely well balanced for those looking to lower their car, increase handling potential and maintain comfort.
Specifications
Brand:
Tanabe
Includes Bump Stops:
No
Spring Rate Front:
246lbs/in
Spring Rate Front Metric:
4.4Kg/mm
Spring Rate Rear:
173lbs/in
Spring Rate Rear Metric:
3.1Kg/mm
Mfgr. Warranty:
3 Year
Condition:
New Product
Return Policy:
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
Standard
RallySport Guarantee - 30 Days
Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.
RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.
The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
Jonathan
Good price and excellent ride height. The only con of this purchase is the bumps. Every bump you roll over feels like something is going to break. I would recommend changing your shocks if you plan on going with springs. I only purchased springs because of the Black Friday special. I will be grabbing coilovers sometime this year to replace the springs. Overall, my satisfaction is with the height.
2 of 2 people found the following review helpful
08stihatch
Took a few hours to install, its makes the install easier if you have the following ; air tools and second set of hands. Only for the simple fact strut and spring separation.. ride quality hasn't deminished, Do recommend upgrading the sway bars..
1 of 1 people found the following review helpful
laryssamaasen1377523
I put these lowering springs on about a month and a half ago and it lowered my car about an inch. It's at the perfect ride height. I didn't need camber adjustment, no issues with bump stops and I'm on factory struts.
1 of 1 people found the following review helpful
deckedoutdesign31199
Gave the perfect drop to my 11 WRX! Currently 15k miles on springs and factory struts are holding out and I didn't have any issues with my bump stops. I will say this though, the rear tires are cambered in a bit and you will need some sort of aftermarket camber adjustment to correct it. But Im 100% satisfied!
1 of 1 people found the following review helpful
Wrxhard13
Got these a few days ago and installed in about 3 hours. Never installed springs in my life. Pretty straight forward. Just remember on the front struts, line up the indention in the rubber dish from the old spring, circles on top of rubber, and spring in the seat. Make sure to test by turning the wheel and be sure the spring turns with the rotor. No binding. It has not settled into its permanent height yet, only has about 30 miles on it. But it rides great and handles even better than before. No rubbing or any issues on stock struts, and wheels.
QUESTIONS & ANSWERS
-
Q: Fitment Camcap6 months ago
Will these spring work with stock wrx wheels and are aftermarket dampers highly recommended for them?
-
-
0 of 0 people found the following answer helpful
A: Yes it will for sure work with the stock wrx wheels! Dampers are more of a personal preference as it could depend what you will be using the car for.
Devan M. @ RallySport Direct 5 months agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: re martinez12284 years ago
-
-
0 of 0 people found the following answer helpful
A: Hello, these springs may be aggressive enough where you need to make small camber adjustments. If it is too aggressive for the stock camber bolts, you can use them in addition to some like the Whiteline or Eibach camber bolts.
guest55fc85a42a8d25a9578b4ffe @Was this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: Will they fit wrxcory4 years ago
-
-
0 of 0 people found the following answer helpful
A: We cannot guarantee compatibility of these springs with aftermarket wheels and we recommend measuring you wheel clearance before ordering the springs to make sure they will work with your wheels. The front would drop 25mm and the rear would drop 18mm.
Zach G. @ RallySport Direct 4 years agoWas this answer helpful? -
1 of 1 people found the following answer helpful
A: We can't answer this question because that has more to do with the wheel fitment than the springs themselves. Whether or not a wheel size will rub or not has a lot more than ride height that will dictate this. Tire size, alignment settings also will effect this. However, the size mentioned is beyond what we'd recommend as safe fitment
TanabeUSA_DV @ Tanabe 4 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: cutting/shorter bump stop require? ste_vang672584 years ago
-
-
0 of 0 people found the following answer helpful
A: These are designed to be used with your OEM bump stops with no modifications required.
guest57853c642a8d25b5018c44a7 @Was this answer helpful?
-
0 of 0 people found the following answer helpful
-
Q: 2009 WRX sedan JustinOHood5 years ago
-
-
0 of 0 people found the following answer helpful
A: These springs would more than likely fit a 2009 WRX, but Tanabe does not confirm fitment and they are made specifically for 2008+ STI and 2011+ WRX models.
Zach G. @ RallySport Direct 5 years agoWas this answer helpful? -
0 of 0 people found the following answer helpful
A: As Zach said, we have not confirmed fitment on the 09 WRX sedan but the hatch only. We are still looking for this model for fitment testing.
TanabeUSA_DV @ Tanabe 5 years agoWas this answer helpful?
-
0 of 0 people found the following answer helpful
