SET YOUR CAR
Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

GrimmSpeed License Plate Relocation Kit

MODEL # GRM 094011

$79.00


  • Q: 08 STI with fog lights  Ferreirax243 years ago

    Will I have to drill a hole to install? I don't seem to have a way to pop anything out.
    • 1 of 1 people found the following answer helpful

      A:  This item mounts using the OEM tow hook connection, you should not have to drill the bumper.

      Josh P. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: fitting 2015 wrx   priccetti174894 years ago

    will this fit a 2015 wrx?
    • 0 of 0 people found the following answer helpful

      A:  This one will not, you will need to use: http://www.rallysportdirect.com/GrimmSpeed-094029-License-Plate-Relocation-Kit

      guest57853c642a8d25b5018c44a7 @
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  This one will not, you will need to use: http://www.rallysportdirect.com/GrimmSpeed-094029-License-Plate-Relocation-Kit

      guest57853c642a8d25b5018c44a7 @
        
      Was this answer helpful?
  • Q: Plate Relocation  FozzieSTi4 years ago

    Is this also applicable to Forester SH 2011 model.? thanks in advance.
  • Q: European Plates  Mrd6714 years ago

    Can this fit Euro plates?
    • 0 of 0 people found the following answer helpful

      A:  The backing plate for this matches up to the US plate. You may be able to adapt it to a Euro plate but it will require custom work. Mike

      GrimmSpeed
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  We can only confirm fitment for US Models.

      Brady R. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: 2014 STI Sedan Base  thatonesti5 years ago

    Will this fit a 2014 STI Sedan Base with no fog lights? I don't see the small cutout that is typically there. Do I need to drill into my bumper?
    • 0 of 0 people found the following answer helpful

      A:  This will fit in your 2014 STi as confirmed in the applications list. The relocation kit will screw into the OEM front tow hook connection. I recommend checking out the pictures below to locate the general area. Thank you!

      Sterling W. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: 8-10 fogless  Sund0wn5 years ago

    I haven't seen a place where this could mount in the 08-10 bumpers that don't have the fog lights. My car is in the shop so I can't look, but will I need to drill a hole in the bumper insert to access the tow hook location?
    • 0 of 0 people found the following answer helpful

      A:  The 08-10 bumper still should have the subtle cutout that pops out for access to where this relocation kit will mount.

      Jacob N. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  When looking at the front of the car, look at the lower grill, to the left of it there is a piece that pops out, thats where it goes.

      Brocks003k17867
        
      Was this answer helpful?
    • 1 of 1 people found the following answer helpful

      A:  FYI, not to argue, but this info is incorrect. The tow hook location on the 08-10 STI is behind the hole cover for the fogless model, and that hole cover does not have a piece that pops out. For reference, look at the posted picture on the Yellow Beatrush Front tow hook, and you'll see the location where the tow hook installs. Not a huge deal, but a hole will have to be drilled to install this product on an 08 STI without the fog light option.

      Sund0wn
        
      Was this answer helpful?
  • Q: N/A 2012 Subaru Impreza Sport Premium.  Distinguishable5 years ago

    Curious, will this fit on a N/A 2012 Subaru Impreza Sport Premium? I'm assuming because it fits on 08-14 WRX/STI. Lurked some posts on NASOIC to make sure, but pulled the trigger anyway. Any information regarding this would be great. Thanks.
    • 0 of 0 people found the following answer helpful

      A:  Unfortunately for the 2012 Impreza we don't have it confirmed to fit that model we only have it confirmed to fit up to 2011 models.

      Kyle A. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: 2009 sti hatch   09subihatchvrs5 years ago

    will this mount on to a varis front bumper?
    • 0 of 0 people found the following answer helpful

      A:  This mount threads into the tow hook hole underneath the bumper cover. If you cut the Varis bumper or make modification and you still have your factory support beam it should fit.

      Nick S. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Japanese Licence plate fitment?   Csteezyboardham5 years ago

    i was going to instal a Japanese licence plate and saw how cool the licence plate deletes look after installed with the licence plate relocate, and i wanted to know if this mount is too big for a japanese licence plate? would i have to modify the plate bracket to get the licence plate flush with the bracket?
    • 0 of 0 people found the following answer helpful

      A:  We have not yet tested this with a Japanese plate but as far as we're aware they are the same size if not very similar. Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: What's in the box?  EddieSixSpeed6 years ago

    Does this LP relocator come with screws to mount a license, or is that all seperate?
  • Q: Bumper cover?  D-WRX6 years ago

    Do you need to remove bumper cover to install this item?
    • 0 of 0 people found the following answer helpful

      A:  You would just need to either remove or alter your factory cover that goes over the tow hook install location.

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Scratching?  TJH19917 years ago

    I would love to get this for my '12 WRX when it arrives next month but was wondering about a few things.. if it is a flush piece of aluminum touching your bumper wont it scratch your paint after some time of rubbing contact? Or can it extrude away from your bumper?? Thanks!
    • 1 of 1 people found the following answer helpful

      A:  The main rod connected to your stock tow hook threading is long enough to ensure if installed properly no parts of the relocation kit will make contact with the bumper. As seen in the pictures, it has adjust ability on the back of the license plate portion.

      Sterling W. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  Hello, This piece doesn't sit flat against your bumper surface and actually sits out about 1/2. The last picture on this page probably shows this best. Let us know if you have any other questions. Thank you.

      Tanner S. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
  • Q: 2011 STi with Fog Light Kit  p311shorty812597 years ago

    Do I have to drill holes for it to fit on an '11 STi Sedan with the Fog Light Kit?
    • 0 of 0 people found the following answer helpful

      A:  As it mounts using the tow hook, you would just need to either drill or remove the bumper cover that is covering it from the factory.

      Kirill C. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
  • Q: Perrin sticker or plate?  armysoldier11807491397 years ago

    Referring to the picture on the bottom of the white subaru. Theres a cover over the stock holes for the license plate. It looks verry nice. Is this a piece I can buy from perrin or RSD?
    • 0 of 0 people found the following answer helpful

      A:  Yes, we do sell quite a few license plate deletes. Search for License Plate Delete on our site and you will see a few results come up. At the time of this posting Grimmspeed has just released some new ones to consider.

      guest56b130432a8d2531128b7ffb @
        
      Was this answer helpful?
  • Q: Fog Lights  PJ877 years ago

    Will this relocation kit block my fog light?
    • 0 of 0 people found the following answer helpful

      A:  It just depends on how you set it up. As you can see in the product pictures you can attach the stud to the plate frame in many different locations. Even if you went completely to one side I think it may block a little bit of light from the fog, but I do not think it would be much.

      guest5633b7522a8d259b038ba50d @
        
      Was this answer helpful?