SET YOUR CAR
FREE SHIPPING
On Orders of 99+.
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts
Product images
Product Media
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)
Community Media
User Media for: Kartboy Front and Rear Endlink Combo - Subaru Models (inc. 2004-2007 STi)

Kartboy Front and Rear Endlink Combo

Subaru Models (inc. 2004-2007 STi)

$200.00
msrp: $230.00

In stock!
You will earn Reward Points with this Purchase.
ANY QUESTIONS?

Features & Product Details

RallySport Direct proudly carries a great selection of quality engineered drivetrain, suspension, and performance upgrades and accessories brought to you by Kartboy.

 

These are the Kartboy Front And Rear Drop Endlinks. These have been designed using premium materials to be direct replacements for your OEM front and rear end links that become weak over time and mileage. The intended purpose will maximize the performance of your stock or aftermarket sway bars to improve the overall handling and response of your vehicle. 

 

 

DETAILS:

  • Complete set for the front and rear location
  • 6061-T6 aluminum construction
  • CNC cut
  • Hard anodized
  • Designed with urethane bushings
  • 100% made in the USA
  • Includes new hardware
  • Includes (4) end links
  •  

     

     

    Specifications

    Brand: Kartboy
    Adjustable: No
    Bearing Type: Polyurethane Bushing
    Material: Aluminum
    QTY: 4
    Mfgr. Warranty: Limited Lifetime Warranty
    Condition: New Product
    Return Policy:
    Standard

    PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED

    REVIEWS & CUSTOMER MEDIA

    8 Reviews
    5 out of 5 Stars
    5 Stars
    (8)
    4 Stars
    (0)
    3 Stars
    (0)
    2 Stars
    (0)
    1 Stars
    (0)
    Customer Photos and Videos
    Kartboy Front and Rear Endlink Combo ( Part Number: KB-017-STI-COMBO)
    2005 legacy GT 3 months ago
    5out of 5stars
    WRX KILLER
    Worth every penny!!! This was a major improvement over my stock style end links. There was a massive decrease in body roll. And the car is much easier to flick back and forth through the turns now. Would definitely recommend if you want a very responsive/stiff ride.
      
    Was this review helpful?
    Great product! 3 years ago
    5out of 5stars
    Jrsbat
    My '04 FXT needed new rear sway bar bushings and front/back endlinks. The Kartboy endlinks got rid of the suspension issues. Best of all the car's handling improved a lot. The car might not have handled this well when new. These are a big upgrade from the OEM parts. The kit is complete (unless you need spacers, I didn't). That's a good thing since some of the old rusted endlinks had to be cut off the car.
      
    Was this review helpful?
    Just what I needed! 7 years ago
    5out of 5stars
    Deadkid9110
    I bought these because my stock endlinks broke while I was trying to remove them. I went for these endlinks because of the simplicity to install, and the good price (I bought them as a Front & Rear Combo). I did not notice anything different after installing them, although I now don't have to worry about them breaking. They are very stout compared to the stock endlinks, which are OK at best. My only complaint is that one of the washers that was included in the kit, was 1 size too small. This meant that the bolt would not go through the center of the washer when trying to install. Luckily I had a spare washer of similar size that I could use. I did the install with the car on jack stands. Needed to use a prybar to ease in the installation, but it was still very do-able.
      
    Was this review helpful?
    3 of 4 people found the following review helpful
    2006 STI (stock) 8 years ago
    5out of 5stars
    Geno
    Front and rear endlinks. Get the spacers. You'll need them for the front. You might want to consider replacing the sway bar bushings at the same time. If the old ones start to spin on removal, they have an allen head top on them. Removal and installation is done with a load on the wheels. (on ramps instead of jack stands.) You'll be amazed at the difference.
      
    Was this review helpful?
    2 of 2 people found the following review helpful
    Great endlinks over oem  8 years ago
    5out of 5stars
    NavinP
    These stopped the clunk from my stock endlinks. But with the great added benefit of reducing lots of body roll from my 07 JDM LGT with the stock bilsteins and springs. Pair with the original JDM spec sways these were perfect. Make me second guess getting coilovers. Had to use spacers up front. None in the rear. Great upgrade, forget the pillow balls
      
    Was this review helpful?

    QUESTIONS & ANSWERS

    • Q: 04 Forester XT Endlink Spacers Needed?  BeMoore19843 years ago

      Hello, I have an 04 Forester XT with Perrin F&R Swaybars, wondering if I need to add the sway bar spacers as well in front or rear to utilize these endlinks? I have aproximately stock height suspension (-20mm stock)
      • 0 of 0 people found the following answer helpful

        A:  It can vary from vehicle to vehicle, but it's very possible you'll require spacers in order to fit these with Perrin's sway bars.

        Marcus E. @ RallySport Direct 3 years ago  
          
        Was this answer helpful?
    • Q: 2007 legacy specB  07specB5 years ago

      Pairing these endlinks with aftermarket white line sway bars. Are spacers required on both front and back?
    • Q: Legacy GT 2006  Randy5 years ago

      Hi RallySport, I would like to check if this products fits a 2006 Legacy GT Wagon (BP5)? Please advise. Thank you.
    • Q: Clunking noise   Joey7 years ago

      I have a clunking noise in the rear and want to just replace all four end links with this kit will I need anything else to help the install and stop the clunking
      • 0 of 0 people found the following answer helpful

        A:  If you have aftermarket sway bars, it would be wise to also purchase the front endlink spacers from Kartboy. Otherwise, nothing else will be needed.

        Josh P. @ RallySport Direct 7 years ago  
          
        Was this answer helpful?
    • Q: Swift Springs  HaVikSpecB4209 years ago

      Would these require spacers with Avo sway bars if i have swift lowering springs??
      • 0 of 0 people found the following answer helpful

        A:  we won't be able to confirm fitment for the avo sway bars as it isn't a product we carry. You will want to install them and then see if they do or don't need them.

        Kyle A. @ RallySport Direct 9 years ago  
          
        Was this answer helpful?