SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
Kartboy Exhaust Hanger 15mm 4 Piece Combo
Subaru WRX 2002-2007 / Forester 1998-2004 / Legacy 1998-2004
INCLUDES:
Features & Product Details
These Kartboy 15mm exhaust hangers are a great addition for those of you who got a new exhaust system, or simply just want to get rid of the rattle. These are fabricated from polyurethane, and unlike the factory soft rubber bushings, these will only allow for minimal movement in your exhaust system.
Save yourself some money by purchasing them in a set of 4. These are made to install in the stock location, and are the stock length.
Specifications
Brand:
Kartboy
Hanger Hole Distance:
35mm
Hanger Hole ID:
15mm
QTY:
4
Mfgr. Warranty:
Limited Lifetime Warranty
Condition:
New Product
Return Policy:
Standard
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
5out of
5stars
crankyfart
Another great product from Kartboy! When the other reviews say this thing is stiff, they really mean it. With this installed, you can be very sure your exhaust is not moving anywhere. Install was quite very straightforward and yes, you would have to put some grease before fitting your exhaust which makes things a lot easier! Bought this pack of 4 since it is a better deal. Plus, this thing is not very expensive so it does not make any sense to not change all 4 when you are already working on it. On a side note, it does not come in a nice packaging but instead RSD just chucked 4 pieces of it inside a box.
5out of
5stars
TypeRSTi
These exhaust hangers are really rigid, virtually eliminating any excessive exhaust movement. They look a lot better than stock hangers, and they hold my exhaust up close to the bumper for a stock look without being too close to the bumper. Installation was easier than expected after reading reviews here. Yes, they’re stiff, and yes, you have to be cognizant of the order in which you install the hangers. They were more difficult for me to install the hangers on the undercarriage of the car than on the exhaust. In my experience, I recommend using soapy water, WD-40 or a similar slippery substance on all hanging points of the car and exhaust to clean everything up a bit and make the process a little easier. Overall, very happy with these exhaust hangers, and I would recommend these.
0 of 1 people found the following review helpful
5out of
5stars
Rich
Perfect for my car
0 of 1 people found the following review helpful
5out of
5stars
02sxywrxy
Helped stop my exhaust rattle. The only complaint I have is these are really solid so on hard acceleration shifting it causes some vibration. Much better than the exhaust tapping things in my opinion though.
0 of 1 people found the following review helpful
5out of
5stars
Njrican
Bought these to hold my new exhaust in place. Good quality and held everything in place perfectly!
QUESTIONS & ANSWERS
-
Q: Longer? Anne4 years ago
Do you sell hangers that are longer than stock hangers? My exhaust is way too close to the bumper..
-
-
0 of
0 people found the
following answer helpful
A: Unfortunately these are the longest hangers we sell
Tylo R @ RallySport DirectWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 4 pack of long hangers? ildylan11 years ago
-
-
5 of
5 people found the
following answer helpful
A: At this current time only standard hangers are available in packs of 4.
Kirill C. @ RallySport Direct 11 years agoWas this answer helpful?
-
5 of
5 people found the
following answer helpful
-
Q: fitment benchpro11 years ago
-
-
0 of
1 people found the
following answer helpful
A: For 2008+ STi's and WRX's you would need to do the 12mm hangers. The hangers are the same dimension with the only difference being the inside diameter. Which Subaru changed from 15mm to 12mm after 2008
Kirill C. @ RallySport Direct 11 years agoWas this answer helpful?
-
0 of
1 people found the
following answer helpful
-
Q: Length? DrewPat11 years ago
-
-
2 of
2 people found the
following answer helpful
A: These are the same length as stock off the car but when installed the stock rubber units do stretch because they are not as strong as the urethane Kartboy units so by upgrading to these it may bring the exhaust closer to the bumper depending on how much the stock hangers are sagging.
Tanner S. @ RallySport Direct 11 years agoWas this answer helpful?
-
2 of
2 people found the
following answer helpful
