Kartboy 15MM Black Exhaust Hanger Long

QUESTIONS & ANSWERS

• Q: 2006 Forester XT 3 inch mid pipe hanger  4ister7 years ago

  The front muffler pipe mount for the mid pipe is 1/3 longer than the rest of the hangers. Will this do the job?
• • 1 of 1 people found the following answer helpful

    A:  This should work well for that application.

    Josh P. @ RallySport Direct 7 years ago  
    Yes  No
    Was this answer helpful?

• Q: Clear rear differential cover  elrefract7 years ago

  Will these hangers make it so my exhaust will clear the rear differential cover? I had an old catback that rubbed a lot on it and caused a horrible sound. Would these work to fix this? Or should I use shorter/longer ones?
• • 0 of 0 people found the following answer helpful

    A:  These hangers will give you more clearance than the stock or stock length hangers. It should fix your issue, but depends greatly on the clearance of the catback itself.

    Josh P. @ RallySport Direct 7 years ago  
    Yes  No
    Was this answer helpful?
  • 0 of 0 people found the following answer helpful

    A:  So, these are longer than the stock hangers, but only when the stock hangers were BRAND NEW. These have SO much less flex to them. I would figure out what your stock length is, and use that, accordingly.

    Hangman0417
    Yes  No
    Was this answer helpful?

• Q: Fujitsubo  EvenTheScore8 years ago

  Will these be too long or not long enough for a fujitsubo power getter exhaust to be installed on a 2004 wrx wagon? I know it's known to be a bulky echaust...
• • 0 of 0 people found the following answer helpful

    A:  These hangers will typically drop the exhaust 1in lower from the factory hangers.

    Brady R. @ RallySport Direct 8 years ago  
    Yes  No
    Was this answer helpful?

• Q: Fitmet  Connor58 years ago

  I have an invidia N1 street catback and im getting some rattaling, will these hangers drop my catback enough to stop the rattling, and if so how low because i dont want it hanging so low it will scrape?
• • 0 of 0 people found the following answer helpful

    A:  We do not have the ability to confirm what is contacting the exhaust based on your description. We recommend finding the fitment issue and see if these may space out the exhaust enough to clear. These will be about 30mm lower than stock.

    Nick S. @ RallySport Direct 8 years ago  
    Yes  No
    Was this answer helpful?

• Q: hanger length recommendation  acekc8310 years ago

  Hi. I am looking at getting an invidia dp with the q300 cbe. Should I order the standard length hangers or the longer ones? I don't want to have an issue with rattle. Thanks!
• • 0 of 0 people found the following answer helpful

    A:  The standard length hangers are very similar in length to your OEM hangers but much stiffer. We are running the OEM hangers on our shop car with the Invidia Q300 catback exhaust. I recommend sizing the catback up while using the OEM hangers then making the decision. Thanks.

    Sterling W. @ RallySport Direct 10 years ago  
    Yes  No
    Was this answer helpful?