SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
Invidia Exhaust Silencer N1 Systems 101mm
Universal
Features & Product Details
RallySport Direct proudly carries a large selection of quality high-performance master-crafted exhaust options brought to you by Invidia.
This is the Invidia N1 Exhaust Silencer. This is available for separate purchase for those of you who need a direct replacement, or simply want to reduce the noise your exhaust system will make. If you work early in the morning or live in an area that has regulations on exhaust sound, then this silencer may be your only solution if you do not want to change your Invidia N1.
DETAILS:
NOTE:
Specifications
Brand:
Invidia
Color:
Stainless Steel
Material:
Stainless Steel
Tip Size:
101mm / 4.00in
Type:
Silencer
Mfgr. Warranty:
1 Year
Condition:
New Product
Return Policy:
Standard
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
5out of
5stars
PygmyGcko
I love the low rumble on my 08 WRX with N1 exhaust, but it is a bit excessive volume wise. If you're looking to give your neighbors a break, this silencer is probably the cheapest and most effective solution, short of a whole new exhaust system. What surprised me the most is that the exhaust tone with the silencer in is still deep and aggressive, and not tinny or sharp like most silencers. The fit is very snug on mine, so I haven't heard any rattle yet. I have also noticed a fair loss of performance, but that is to be expected when greatly restricting exhaust flow. Overall, this thing works great and I'd say it's a great value.
5out of
5stars
1pt
Purchased for my 2001 Celica GTS with Invidia N1 catback. Fit great, snug enough to avoid rattle but not so tight as to be difficult to install or remove. Attached with the included nut and bolt and it hasn't shown signs of loosening yet. The noise reduction is great, car sounds like it has stock exhaust at idle and is a good 40% quieter at higher RPMs. The welds are ugly af but solid, for the price I can't complain. Recommended for road trips or not annoying your neighbors!
1out of
5stars
mindriddle
Measured around with my caliper and it was about 98mm diameter vs the inner diameter of my N1 exhaust which was around 102mm. It sound like complete garbage with it leaking around the rim and not just from the middle hole. I put a rag around it and it sounds so much better ( like it should) when the sound is only coming from the center hole. Oh, and the welds were horrible with holes. Very disappointed with quality control.
2out of
5stars
mindriddle
Not sure why some say the fitment is good and some say its not. Well, mine is about a mm too small around my N1 exhaust on my 08 WRX. I shouldnt have to modify anything just to make it do what it should. Yes, it definitely lowers the volume down but because of the fitment, it rattles at idle and certain rpm. And because of the poor fitment, if the bolt/nut ever falls off, the silencer will definitely fall out and could cause a serious accident and/or damage to the car behind you. Ive had other I will be taking mine off to 'modify' it and create some notches/bends on the inner tab to make it fit better and hope it doesnt rattle, on top of purchasing a lock nut for it.
4out of
5stars
funnotc
Just the right amount of silencing yet still gives you a growl when you step on it. I do recommend drilling and adding a second screw to hold it in place better so you don' t get a vibration noise.
QUESTIONS & ANSWERS
-
Q: 2009 WRX install eriggen903 years ago
Does this come with bolts/installation hardware and does it come with 1 or 2 silencers?
-
-
0 of
0 people found the
following answer helpful
A: This will come with the single nut and bolt for the install and this is for one single silencer. Thanks.
Rick C. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fit of silencer Nick4 years ago
-
-
0 of
0 people found the
following answer helpful
A: There maybe some light wiggle room for this part, if you feel it is excessive please contact our customer service to resolve this issue.
Michael N.Was this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Invidia n1 exhaust silencer Jonathan 4 years ago
-
-
0 of
0 people found the
following answer helpful
A: If the N1 you have on your Si has a 101mm tip, then yes this would fit. The ones we have listed on our site are all 101mm.
Michael N.Was this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Question Jbaek4 years ago
-
-
0 of
0 people found the
following answer helpful
A: Yes, this will fit the Invidia system on your WRX
Marcus E. @ RallySport Direct 4 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Bolt and Nut size dmartinfitness5 years ago
-
-
3 of
3 people found the
following answer helpful
A: M6 x 1.0
Tyler A. @ RallySport Direct 5 years agoWas this answer helpful?
-
3 of
3 people found the
following answer helpful
This Part Fits
Universal Product
This item is non application specific.
Please verify compatibility before purchase. May require some modification for proper installation.
This item is non application specific.
Please verify compatibility before purchase. May require some modification for proper installation.
