SET YOUR CAR
TALK TO A PARTS EXPERT
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
Invidia N1 Cat Back Exhaust Titanium Tips
Scion FR-S 2013-2016 / Subaru BRZ 2013+ / Toyota 86 2017+
Features & Product Details
RallySport Direct proudly carries a large selection of quality high-performance master-crafted exhaust options brought to you by Invidia.
RallySport Direct is proud to carry the Invidia N1 Cat-Back Exhaust System. This exhaust system combines a larger piping diameter and smooth bends to improve the exiting flow path without obstructions. This means you will get more horsepower along with more torque as well as a reduction in turbo lag. Additionally, users will find that the most rewarding aspect of this cat-back is the aggressive exhaust note.
DETAILS:
Invidia Exhaust options for your vehicle
Product Video
Specifications
Brand:
Invidia
Exhaust Orientation:
Angled Exit
Installation Hardware Included:
Yes
Piping Coating:
No
Piping Flex Joint:
No
Piping ID:
60mm
Piping Material:
304 Stainless Steel
Piping Taper:
No
Silencer Included:
Yes
Tip Material:
Titanium
Tip Qty:
2
Tip Shape:
Round
Tip Size:
101mm
Mfgr. Warranty:
1 Year
Condition:
New Product
Return Policy:
Standard
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
5out of
5stars
mrriaz23
I was watching almost every video on YouTube about this exhaust, they all didn't seem loud but I really liked the aesthetic of this exhaust so I purchased it , my gawd videos do not do justice , this exhaust is insanely loud more warm start then cold . if you want loud get this , even with the silencers its loud , the silencers do help with the drone tho if you are worried about it, and I love is fits on the oem hangers!
5out of
5stars
Alex
High quality welds and much louder and more aggressive sound. I am running everything stock with this catback and it still sounds great. This was my first time working on a car and the install took maybe two hours without any issues.
5out of
5stars
Gangjob
Really easy instal. Beautiful looking and sounding exhaust. Had a minor figment issue with the tips. The left side had 3 fingers space from the diffuser and the right one had 1 and a half. To fix it we loosened everything and re tightened it all back up while holding it in proper place. Other than that it is an amazing product for the price.
2 of 2 people found the following review helpful
5out of
5stars
Craig
Hello All, If your exhaust is not even on both sides make sure you did not mix up the exhaust hangers. Note that the stock hangers are two different sizes. There is a longer hanger that goes towards the front of the car and the shorter hanger goes towards the rear. I had issues where the driver side muffler was lower than the other side by a very noticeable amount. It took my friend and myself maybe three different times looking at it to figure it out. After we put the correct hangers back in the correct position it all lines up great. I definitely give this exhaust a five star rating. Its not insanely loud but you can hear the deep rumble from maybe 300 ft away. The idle shakes the floor in my house and my neighbors know when I leave :)
5out of
5stars
Brandon
Absolutely love it it took me about 20 minutes to swap the stock catback to the n1, it fits well and fills up the empty space that was there, it sounds great, easy to install, but there was a few leaks from the gasket until it heated up and sealed them shut , I recommend them they are great!
QUESTIONS & ANSWERS
-
Q: Fitment Thatwrx2 years ago
Will this fit a 2020 wrx
-
-
0 of
0 people found the
following answer helpful
A: No, you would want part # HS15STIGTT for the 2020 WRX.
Lane H. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: how loud car 3 years ago
-
-
0 of
0 people found the
following answer helpful
A: Don't take this as official, but we've seen about 92 dB at idle and 105 at 3K rpm
Rick C. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Invidia N1 for my mini leviholbrook483 years ago
-
-
0 of
0 people found the
following answer helpful
A: No unfortunately they only make the Q300 for the 11 Mini at this time which you can find here. https://www.rallysportdirect.com/part/cat-back-exhaust-system/inv-hs07mcsgtp-invidia-q300-cat-back-exhaust
Rick C. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitting Dalton4 years ago
-
-
0 of
0 people found the
following answer helpful
A: Yes, this will work for your 2017 BRZ series.yellow.
Marcus E. @ RallySport Direct 4 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitting Dalton4 years ago
-
-
0 of
0 people found the
following answer helpful
A: Yes, this will work for your 2017 BRZ series.yellow.
Marcus E. @ RallySport Direct 4 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
This Part Fits
Toyota 86
Base
2017 Toyota 86 Base
2018 Toyota 86 Base
2019 Toyota 86 Base
GT
2018 Toyota 86 GT
2019 Toyota 86 GT
GT Black
2018 Toyota 86 GT Black
TRD Special Edition
2019 Toyota 86 TRD Special Edition
