SET YOUR CAR
- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Product images
Product Media
Community Media
Invidia N1 Cat Back Exhaust Titanium Tips
Subaru Legacy 2.5GT 2010-2012
Features & Product Details
RallySport Direct proudly carries a large selection of quality high-performance master-crafted exhaust options brought to you by Invidia.
This is the Invidia N1 Cat-Back Exhaust System. The N1 is one of Invidia's most popular cat-back options offered in their catalog due to the quality stainless steel construction that combines smooth bends with an increase in piping diameter. This allows for an unobstructed flow path for the exhaust gases to exit which will increase both the horsepower and the torque while improving the overall throttle response. Additionally, users will be rewarded with the race-inspired sound this exhaust system will create which will make the overall driving experience much more enjoyable.
DETAILS:
Specifications
Brand:
Invidia
Exhaust Orientation:
Straight Exit
Installation Hardware Included:
Yes
Piping Coating:
No
Piping Flex Joint:
Yes
Piping ID:
76mm
Piping Material:
304 Stainless Steel
Piping Taper:
No
Silencer Included:
Yes
Tip Material:
Titanium
Tip Qty:
2
Tip Shape:
Round
Tip Size:
101mm
Mfgr. Warranty:
1 Year
Condition:
New Product
Return Policy:
Standard
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Customer Photos and Videos
3 of 3 people found the following review helpful
5out of
5stars
CHOCMLK
I picked up this exhaust from Rally Sport Direct on Friday and installed it on my Legacy GT in less than one hour. The cardboard box it came in was too large to fit in my back seat or my trunk, but the guys at RSD were awesome and helped me unpack the items from the box and load them into my car. I also purchased GRM 077046 OEM downpipe to 3 inch cat back adapter, and GRM 020099 Downpipe donut gasket. The installation was very easy. We removed the stock exhaust, and then just built the N1 cat back piece by piece starting with the mid pipe, then the Y pipe, and the mufflers. Once everything was in place on the exhaust hangers we put the gaskets and bolts in place and tightened everything down. The quality of the N1 is excellent, and the sound is AMAZING! I highly recommend this upgrade.
3 of 3 people found the following review helpful
5out of
5stars
SixStar303
Good noticeable power difference without anything else additional on the vehicle. Definitely gives a strong deep tone but nothing too loud. Very easy to install and also looks nice with the burnt tips. I would recommend to anyone looking for more bark than the Q300.
2 of 2 people found the following review helpful
5out of
5stars
SixStar303
The exhaust system sounds great overall, definitely deep and powerful. The installation is simple and easy as well. Please note that I needed to get a different pair of bolts to attach the Invidia to the stock mid-pipe, as the length of the bolts supplied were not long enough. I would recommend this product to any Subaru enthusiast looking for great value and performance accompanied by a powerful growl.
2 of 2 people found the following review helpful
5out of
5stars
jessesrap03404
Installed this exhaust yesterday looks great and sounds great! Makes me love my car that much more. Very easy install only thing you need to do is drill the holes bigger where it connects to the stock downpipe. I would recommend this product
QUESTIONS & ANSWERS
-
Q: Invidia N1 Robert.kvalheim6 years ago
Hi, Will this system fit my 2010 Legacy 2.5GT Wagon (Euro Spec, A/T) Regards Robert (Norway)
-
-
0 of
0 people found the
following answer helpful
A: This is not a direct fit for your 2010 Legacy and would require major modification to work.
Connor M. @ RallySport Direct 6 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 3.6R DJMajickMan9 years ago
-
-
0 of
0 people found the
following answer helpful
A: This will not fit the 3.6R Legacy and is only confirmed to mate up with the downpipe of the 2.5GT models.
Nick S. @ RallySport Direct 9 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Fitment blackrex939 years ago
-
-
0 of
0 people found the
following answer helpful
A: This catback will not fit 2005 Legacy GT models and the Q300 is the only option we carry for that car at this time.
Zach G. @ RallySport Direct 9 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
