Invidia Q300 Cat Back Exhaust
Subaru WRX Hatchback 2008-2010
Product Resources
Features & Product Details
RallySport Direct proudly carries a large selection of quality high-performance master-crafted exhaust options brought to you by Invidia.
This is the Invidia Q300 Cat-Back Exhaust System. The Q300 is a highly coveted exhaust system among enthusiasts because it gives them everything they want in terms of a performance upgrade. You get premium fabrication using quality materials that are combined with machined welds. The design features very smooth radius bends with an increase in piping diameter to allow for an unobstructed flow path for the exhaust to escape. And the beautiful polished finish right out of the box will check all the aesthetic boxes to provide the rear of your vehicle with a pronounced look. The final result will provide the user with a nice increase in power and torque, and improvements in the throttle response. The most rewarding aspect is the race-inspired sound. From mild bolt-ons to full builds, the Invidia Q300 will change the character of your vehicle to make your driving experience much more enjoyable.
DETAILS:
NOTE:
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Delivered fast, and the sound is what i wanted. It has a low rumble that's not obnoxious. I expect it to get a bit louder when i get the down pipe. Other than that, simple instal and good stock look. I recommend it.
My expectations far exceeded. 1) Was apprehensive that it would be much too loud. But this was not the case. Excellent sound at moderate volumes. 2) Quality and fit left nothing to be desired. Especially given that this was DIY. Good job!!
The fitment is good and the quality is outstading, but the flexible part is too low and it scratches all the time on bumpy roads, specially if you're wearing lowering springs. The sound brings the boxer rumble to life but is near to stock, you must use a DP to give it an extra tone. I had to sell it before almost breaking it (on the terrible roads) in 6 months.
B*****!!!!!! Great exhaust, very nice look, easy DIY installation. Sounds a little louder than stock during normal driving but with that Suby boxer rumble. Higher RPMS brings the Q300 to life!
The quality is outstanding, the fit is perfect, & the sound is perfect. Its just loud enough with no highway drone. Highly recommend this exhaust.
QUESTIONS & ANSWERS
-
Q: Boost Creep? itzbmac8 years ago
Hi, Im just wondering whether this, combined with an Invidia Catted divorced DP will cause any boost creep issues on my 08 WRX? Any help would be greatly apprecaited! - Mac
-
-
0 of
1 people found the
following answer helpful
A: Generally catted downpipes are not subject to the boosting issues like catless downpipes. You should not see any issues.
Josh P. @ RallySport Direct 8 years ago
-
0 of
1 people found the
following answer helpful
-
Q: Flow Wesleyy1288740638 years ago
So in regards to the first pipe that starts at the cat. I see two cannisters a small that looks like a flexible mesh and a medium size one that is straight pipe. Can you tell me what they are there for and if that will cause flow restrictions compared to the other cat backs that don't have that in there pipes? Thank you
-
-
0 of
0 people found the
following answer helpful
A: The mesh looking part is a flex pipe and is used to help make installation easier by allowing the midpipe to bend a little. The larger solid canister is actually a resonator, which helps smooth out the sound of the exhaust. Neither will restrict flow.
guest56ad69792a8d256e198b66b5 @
-
0 of
0 people found the
following answer helpful
-
Q: Invidia Q300 sound clip SamG8 years ago
Hey I was just wondering if anyone has a sound clip of this exhaust? If you do I would love to hear it
-
-
0 of
1 people found the
following answer helpful
A: We unfortunately do not have a video or sound clip of this exhaust, but there are several videos on Youtube.
Zach G. @ RallySport Direct 8 years ago
-
0 of
1 people found the
following answer helpful
-
Q: Fit with Cobb DP? Bonzai8 years ago
Hello folks, I have a Cobb catted downpipe on my 2009 WRX 265 Hatchback. It tapers to 2.5 as you guys well know. I've heard some people connecting it without any adapters but is that really fine? Does the Grimmspeed 2.5 to 3 adapter work? I've heard conflicting things on the Grimmspeed adapter working or not with the Cobb DP--Invidia Catback.
-
-
1 of
1 people found the
following answer helpful
A: You can use an adapter, or you can use the Remflex gasket. Either one will work.
Kyle A. @ RallySport Direct 8 years ago -
0 of
0 people found the
following answer helpful
A: @Kyle A. so this is the gasket you were talking about? http://www.rallysportdirect.com/Remflex-3-inch-Exhaust-Gasket-2-Bolt If so I'm glad I asked, that's much cheaper. Cheers.
Bonzai
-
1 of
1 people found the
following answer helpful
-
Q: fit will.kinnard155109 years ago
Will this fit cleanly with a Grimmspeed down pipe?
-
-
0 of
1 people found the
following answer helpful
A: This catback will fit well with the Grimmspeed downpipe.
Zach G. @ RallySport Direct 9 years ago
-
0 of
1 people found the
following answer helpful