- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Invidia Titanium Tip Racing Cat Back Exhaust Single Exit
Subaru WRX Sedan 2008-2014 / STI Sedan 2011-2014
Features & Product Details
If you are looking for that ultimate performing cat-back exhaust system, then you will be pleased with the Invidia Titanium Tip Racing Cat Back Exhaust System. This exhaust system has been specifically designed with minimal bends to reduce as much exhaust turbulence as possible. Allowing for improved throttle response, reduced turbo lag, and increases in both horsepower and torque in the 08-14 Subaru WRX Sedan and 11-14 STI Sedan.
This exhaust system has been fabricated from 304 stainless steel and features 76MM piping for an aggressive tone under acceleration. Exhaust gasses will exit a titanium 101MM tip which adds a nice touch to the exterior.
Exhaust hangers are welded onto the OEM locations of this exhaust system so no further modifications to the body will be needed for fitment. New gaskets, hardware, as well as a silencer are provided to make the Racing Cat Back Exhaust System ready for installation.
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Easy to install comes with everything you need. Paired with a catless DP so yes this is real loud and awesome!
It was very easy to install onto my 2008 WRX Sedan with just a jack and two stands. No fitment issues, and it sounds amazing. Nice rumbly cold start, and absolutely no drone inside, even at highway speeds. Also a noticeable increase in performance.
Let me start by saying that you HAVE TO GET A DOWN-PIPE with this exhaust!! The sound is refined and LOUD! Lots of fireballs!
The exhaust itself sounds amazing but my issue is it’s hitting one of my control arms and makes a metal sounds when turning my car on and off. I’m not sure if my exhaust in particular is shaped upwards to be close to my cv boot and control arm like that.
This Catback is really high quality and far lighter than the stock system. The exhaust is super loud, but not OTT like a straight pipe. I have a catless downpipe and stock headers and up pipe, and it is bearable, depending on who you are. There is drone, but I don't mind.
QUESTIONS & ANSWERS
-
Q: Fitment cstamay128 months ago
Will this be able to be installed on a 2012 Impreza 2.0i Sedan?
-
-
0 of
0 people found the
following answer helpful
A: This will not fit without modification, it is designed for the turbocharged models.
Lane H. @ RallySport Direct 4 months agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 2008 Subaru wrx Invidia Race cat-back exhaust fitment Vince12 months ago
-
-
0 of
0 people found the
following answer helpful
A: As long as you have a Sedan, this will be the right one. And if you're running the stock downpipe an adapter will be required and I will link to it below. If you are running an aftermarket downpipe, no adapter will be required. https://www.rallysportdirect.com/part/exhaust-gaskets-and-hardware/grm-077046-grimmspeed-oem-downpipe-to-3in-cat-back-adapter
Rick C. @ RallySport Direct 12 months agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: fitment STIDaily1 year ago
-
-
0 of
0 people found the
following answer helpful
A: This is only confirmed to fit 2011+ STIs it looks like, and only sedans. As with the downpipe, it should fit most 3-inch DPs with the 2 hole setup, but we don't confirm fitment between differently branded parts.
CodyWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Will it fit? Andy2 years ago
-
-
0 of
0 people found the
following answer helpful
A: This should bolt up with no issues.
Michael N.Was this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Invidi exhaust fitment Eric2 years ago
-
-
0 of
0 people found the
following answer helpful
A: This will not work. In order to fit you will need to have this exhaust modified in order to fit.
Michael N.Was this answer helpful?
-
0 of
0 people found the
following answer helpful
