SET YOUR CAR
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Process West Front Mount Intercooler Kit

MODEL # PRWPWFMIC03

$1,280.57


  • Q: Upgraded turbo necessary   Polishkgn3 years ago

    Would I need to get a bigger turbo to fully utilize this system. Vf48 right now.
    • 0 of 0 people found the following answer helpful

      A:  A Front Mount Intercooler is typically only necessary for setup making over 450whp.

      Brady R @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Front Mount kit  brandon984 years ago

    Is there any additional things I need to buy or does it just bolt
    • 0 of 0 people found the following answer helpful

      A:  Everything you need comes with the kit...you will need an aftermarket air intake though...factory air box must be removed for piping clearance.

      Process West @ Process West 4 years ago  
        
      Was this answer helpful?
  • Q: Process West Front Mount Intercooler Kit  Ron H.4 years ago

    Is the kit set up to work with a rotated Turbo, such as a Full Race Borg Warner EFR setup? If not is the front mount intercooler available by itself and what is the cost? Is it available with black finish? What are the dimensions? Thank you,
    • 0 of 0 people found the following answer helpful

      A:  The piping for this kit is designed to only work with stock location turbos, and it could be adapted for a rotated turbo, but modification would be required. We have not needed to order the core separately so far, and please contact customer service so we can see if that is an option. The dimensions are 24.40" x 10.82" with a depth of 3.54 ".

      Zach G. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
  • Q: Cold air intake  dustin_gogo184115 years ago

    Which CAI can fit with this kit? Or can the AEM CAI fit? Thank you
    • 0 of 1 people found the following answer helpful

      A:  We have not tested fitment with the AEM CAI and we can only confirm compatibility with the Process West cold air intake at this time.

      Zach G. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: Fitment  SubaruGirardi6 years ago

    Hey just curious on two subject with this intercooler. With this intercooler being 10inchs shorter would the Cusco Front Member Power Brace fit with this intercooler?? And how much wheel horse power would this handle cause I'm in the process of a 550 hp build
    • 0 of 0 people found the following answer helpful

      A:  Unfortunately we do not have any testing when it comes to the Cusco front member power brace and fitment with this intercooler so we would not be able to guarantee fitment with each part. Process West has not released horsepower figures but it is likely this can support your goals.

      Nick S. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: tomei turbo compatibility  xmarbelx6 years ago

    ive got a 7760 tomei bolt on turbo on my 2010 GRB sti.. will this kit work ok with that?
    • 1 of 1 people found the following answer helpful

      A:  This intercooler is compatible with any direct replacement turbo, including the Tomei M7760 turbo.

      Zach G. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: 2014 wrx  mxriderandrew92022526 years ago

    Will this work for a 2013 wrx if i change to a different turbo setup?
    • 0 of 0 people found the following answer helpful

      A:  This will not be a direct fit for 2008+ WRX models because the throttle body is in a different location than STI models and the piping will not line up.

      Zach G. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  sit tight...the Process West 2008-2013 WRX front mounted intercooler kit is not far away.

      Process West @ Process West 6 years ago  
        
      Was this answer helpful?
  • Q: BOV  Ronin_STi6 years ago

    DOes this have a flange for stock bpv or the aftermarket bov i have?
    • 0 of 0 people found the following answer helpful

      A:  It comes with a flange for a stock valve, but you can easily change that to the valve of your liking

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Short ram  Ronin_STi6 years ago

    WIll this kit interfear with my k&n typhoon short ram intake?
    • 0 of 0 people found the following answer helpful

      A:  We have not done fitting to see if that would be a issue or not. You might need to trim your heat shield on the K&N to work with this Intercooler

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: turbo  nickrhoden6 years ago

    will this fit with the stock turbo?
    • 0 of 0 people found the following answer helpful

      A:  Yes this should work with the stock turbo but a front mount intercooler would not be required if you are still running a stock turbo. A top mount in that case would be sufficient.

      Nick S. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: 2011 STI Sedan fitment  JayKing7 years ago

    Just wondering if your able to retain the fog lights. If so, is there any modification to the fog lights? and does anyone have a pic? -Jay
    • 0 of 0 people found the following answer helpful

      A:  Hello Jay, There is a picture on this page in the Photos tab with the factory fog lights being retained.

      Kyle A. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
  • Q: fog lamps  glennthurber7 years ago

    can you still have functional fog lamps
    • 0 of 0 people found the following answer helpful

      A:  We should have a picture posted up soon of this kit installed on an STi with the fog lamps still installed.

      Tanner S. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
  • Q: crash bar?  randy7 years ago

    since you need to remove the factory crash bar,does this kit supply you with a aftermarket crash bar like most kits do?
    • 0 of 0 people found the following answer helpful

      A:  A new beam is not included, reason is the core is so thick it leaves no room behind the bumper for one.

      Kirill C. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
  • Q: Crash Bar  rex.effect7 years ago

    Does it need to be removed, as well?
    • 0 of 0 people found the following answer helpful

      A:  Yes the crash beam will need to be removed off the vehicle to allow for intercooler clearance

      Kirill C. @ RallySport Direct 7 years ago  
        
      Was this answer helpful?
  • Q: fitment  Dr_qatameezo360018 years ago

    does this intercooler fits with the stock air box ?
    • 0 of 0 people found the following answer helpful

      A:  It looks like you maybe could but you are going to be cutting it up quite a bit. We'll have a picture of the kit installed posted shortly.

      Tanner S. @ RallySport Direct 8 years ago  
        
      Was this answer helpful?
  • Q: Inlet and Outlet Diameter  rgv250994658 years ago

    Inlet and Outlet Diameter?
    • 0 of 0 people found the following answer helpful

      A:  The inlet and outlet diameter are both 3"

      guest561671092a8d25a1658c55d3 @
        
      Was this answer helpful?