SET YOUR CAR
Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts
Product images
Product Media
Mishimoto Front Mount Intercooler Black (Part Number: )
Mishimoto Front Mount Intercooler Black (Part Number: )
Mishimoto Front Mount Intercooler Black (Part Number: )
Mishimoto Front Mount Intercooler Black (Part Number: )
Mishimoto Front Mount Intercooler Black (Part Number: )
Mishimoto Front Mount Intercooler Black (Part Number: )
Mishimoto Front Mount Intercooler Black (Part Number: )
Mishimoto Front Mount Intercooler Black
Subaru WRX 2008-2014
Write a Review | 6 Q&As
Part # MMINT-WRX-08BK
$1,080.00
msrp: $1,350.00

Only 2 left!

Features & Product Details

Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto WRX Front-Mount Intercooler Kit will provide your Subaru with the ability to make the most horsepower and torque possible. This Mishimoto front-mount intercooler was designed with a large 28" intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time. The Mishimoto WRX intercooler features smooth cast end tanks that are CFD tested for maximum airflow with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The intercooler provides the best airflow and heat-exchange properties for those time-attack laps, or a 10-second blast down the quarter mile.

The Mishimoto Subaru WRX Front-Mount Intercooler Kit also features four mandrel-bent aluminum pipes for optimum airflow. The hot-side pipes are 2.25" in diameter to keep airflow velocities high, giving your car an instant response without excessive throttle lag that plagues many front-mount intercooler designs. The cold side of the system features 3” mandrel-bent aluminum tubing for maximum airflow, and to match the diameter of your throttle body. The kit is compatible with both stock and aftermarket bypass or blow-off valves.

The kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting or drilling is required to install the crash bar and intercooler. The kit also includes vehicle-specific intercooler pipes designed exclusively for the 2008–2014 WRX turbo and intake manifold. Overflow bottle relocation brackets are included to move the bottle to the opposite side of the vehicle. All mounting brackets come with applicable hardware, zip ties, and thermal wrap. The kit also includes every coupler and clamp you need for a clean install.

Specifications

Brand: Mishimoto
Color: Black
Core Depth: 3.50 in
Core End Tank Material: Aluminum
Core Height: 8.25 in
Core Type: Bar and Plate
Core Width: 28.00 in
Includes New Clamps: Yes
Installation Hardware Included: Yes
Intercooler Piping Included: Yes
Bumper Beam Included: Yes
Bumper Modification Required: No
Intercooler Piping Material: Aluminum
Intercooler Piping Finish: Polished
Mfgr. Warranty: Limited Lifetime
Condition: New Product
Return Policy:

RallySport Guarantee - 30 Days


Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.

RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.

The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
RallySport Guarantee

PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED

REVIEWS & CUSTOMER MEDIA

Be the first to write a review

QUESTIONS & ANSWERS

  • Q: FMIC   marcjoseph032 years ago

    I have a mishimoto oil cooler on my 2013 WRX hatch, will this fit or do I have to remove my oil cooler to accommodate this FMIC?
    • 0 of 0 people found the following answer helpful

      A:  This front mount will be in the same space as your oil cooler. You would need to create custom brackets to relocate the oil cooler if you choose to use this front mount as well.

      Chris W. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: Aem intake and fog light issue  Nofunofanykind2 years ago

    I understand that the factory fog lights cannot be retained with this fmic kit. Do other aftermarket fog lights work instead or do I need to have the fog light holes covered? Secondly, I'm running an AEM intake (2013 wrx) and am wondering if the fmic piping will go in with the AEM intake in place or will I have to replace it with a short ram (which is way less that a fun idea)
    • 0 of 0 people found the following answer helpful

      A:  You may be able to use fog lights that are relocated away from the intercooler and bumper beam. The AEM intake will not be compatible. You will need a short ram intake that doesnt interfere with the intercooler piping.

      Josh P. @ RallySport Direct 2 years ago  
        
      Was this answer helpful?
  • Q: Instructions  wrxwgn3 years ago

    Does this kit come with instructions?
    • 0 of 0 people found the following answer helpful

      A:  Instructions should come with this kit. You can also find the instructions directly on Mishimoto's website.

      Brady R @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: fitment   chase3 years ago

    Above it is stated No cutting or drilling is required to install the crash bar and intercooler does this include no cutting of the front bumper cover ? Also can I purchase an adapter so I can run a sti style turbo in the future ?
    • 0 of 0 people found the following answer helpful

      A:  Some Trimming of the OEM bumper will be required. There isn't a set adapter for purchase to make this work with anything other than a VF52 but it could be modified to work with a 90 degree and straight couplers.

      guest569faaee2a8d2517038b4568 @
        
      Was this answer helpful?

This Part Fits

Subaru Impreza
2.5 GT Hatchback
2009 Subaru Impreza 2.5 GT Hatchback
2010 Subaru Impreza 2.5 GT Hatchback
2.5 GT Sedan
2009 Subaru Impreza 2.5 GT Sedan
2010 Subaru Impreza 2.5 GT Sedan
WRX Hatchback
2008 Subaru Impreza WRX Hatchback
2009 Subaru Impreza WRX Hatchback
2010 Subaru Impreza WRX Hatchback
2011 Subaru Impreza WRX Hatchback
2012 Subaru Impreza WRX Hatchback
2013 Subaru Impreza WRX Hatchback
2014 Subaru Impreza WRX Hatchback
WRX Limited Hatchback
2010 Subaru Impreza WRX Limited Hatchback
2011 Subaru Impreza WRX Limited Hatchback
2012 Subaru Impreza WRX Limited Hatchback
2013 Subaru Impreza WRX Limited Hatchback
2014 Subaru Impreza WRX Limited Hatchback
WRX Limited Sedan
2010 Subaru Impreza WRX Limited Sedan
2011 Subaru Impreza WRX Limited Sedan
2012 Subaru Impreza WRX Limited Sedan
2013 Subaru Impreza WRX Limited Sedan
2014 Subaru Impreza WRX Limited Sedan
WRX Premium Hatchback
2010 Subaru Impreza WRX Premium Hatchback
2011 Subaru Impreza WRX Premium Hatchback
2012 Subaru Impreza WRX Premium Hatchback
2013 Subaru Impreza WRX Premium Hatchback
2014 Subaru Impreza WRX Premium Hatchback
WRX Premium Sedan
2010 Subaru Impreza WRX Premium Sedan
2011 Subaru Impreza WRX Premium Sedan
2012 Subaru Impreza WRX Premium Sedan
2013 Subaru Impreza WRX Premium Sedan
2014 Subaru Impreza WRX Premium Sedan
WRX Sedan
2008 Subaru Impreza WRX Sedan
2009 Subaru Impreza WRX Sedan
2010 Subaru Impreza WRX Sedan
2011 Subaru Impreza WRX Sedan
2012 Subaru Impreza WRX Sedan
2013 Subaru Impreza WRX Sedan
2014 Subaru Impreza WRX Sedan