SET YOUR CAR
Buy Now, Pay Later!
FREE SHIPPING
On orders over $200
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts
Product images
Product Media
Mishimoto Front Mount Intercooler w/ Intake Black (Part Number: )
Mishimoto Front Mount Intercooler w/ Intake Black (Part Number: )
Mishimoto Front Mount Intercooler w/ Intake Black (Part Number: )
Mishimoto Front Mount Intercooler w/ Intake Black (Part Number: )
Mishimoto Front Mount Intercooler w/ Intake Black (Part Number: )
Mishimoto Front Mount Intercooler w/ Intake Black (Part Number: )
Mishimoto Front Mount Intercooler w/ Intake Black (Part Number: )
Community Media
Mishimoto Front Mount Intercooler w/ Intake Black (Part Number: )
Mishimoto Front Mount Intercooler w/ Intake Black
Subaru WRX 2008-2014
Read 4 Reviews | 3 Q&As
Part # MMINT-WRX-08AIBK
$1,196.00
msrp: $1,495.00

Only 1 left!

Features & Product Details

Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto WRX Front-Mount Intercooler Kit will provide your Subaru with the ability to make the most horsepower and torque possible. This Mishimoto front-mount intercooler was designed with a large 28" intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time. The Mishimoto WRX intercooler features smooth cast end tanks that are CFD tested for maximum airflow with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The intercooler provides the best airflow and heat-exchange properties for those time-attack laps, or a 10-second blast down the quarter mile.

The Mishimoto Subaru WRX Front-Mount Intercooler Kit also features four mandrel-bent aluminum pipes for optimum airflow. The hot-side pipes are 2.25" in diameter to keep airflow velocities high, giving your car an instant response without excessive throttle lag that plagues many front-mount intercooler designs. The cold side of the system features 3” mandrel-bent aluminum tubing for maximum airflow, and to match the diameter of your throttle body. The kit is compatible with both stock and aftermarket bypass or blow-off valves.

The kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting or drilling is required to install the crash bar and intercooler. The kit also includes vehicle-specific intercooler pipes designed exclusively for the 2008–2014 WRX turbo and intake manifold. Overflow bottle relocation brackets are included to move the bottle to the opposite side of the vehicle. All mounting brackets come with applicable hardware, zip ties, and thermal wrap. The kit also includes every coupler and clamp you need for a clean install, and the optional Mishimoto Subaru WRX/STI Performance Race Intake for added cooling power.

Specifications

Brand: Mishimoto
Color: Black
Core Depth: 3.50 in
Core End Tank Material: Aluminum
Core Height: 8.25 in
Core Type: Bar and Plate
Core Width: 28.00 in
Includes New Clamps: Yes
Installation Hardware Included: Yes
Intercooler Piping Included: Yes
Bumper Beam Included: Yes
Bumper Modification Required: No
Intercooler Piping Material: Aluminum
Intercooler Piping Finish: Polished
Filter Color: Red
Filter Element Type: Wet
Filter Material: Cotton
Filter Reuseable: Yes
Piping Color: Polished
Tuning Required: Yes
Mfgr. Warranty: Limited Lifetime
Condition: New Product
Return Policy:

RallySport Guarantee - 30 Days


Items that are covered under the RallySport Guarantee offer a 30 day no questions asked return policy.

RallySport Guarantee items may be returned within 30 days of the original invoice date and must include all the original parts and contents for a refund.

The RallySport Guarantee does not apply to products that have been modified, damaged, misused or abused. All returns require an RMA (Return Merchandise Authorization) Number, and freight charges are strictly non-refundable. For more information regarding our freight refund policy, please refer to our return policy page found HERE.
RallySport Guarantee

PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED

REVIEWS & CUSTOMER MEDIA

4 Reviews
3.3 out of 5 Stars
5 Stars
(0)
4 Stars
(1)
3 Stars
(3)
2 Stars
(0)
1 Stars
(0)
Customer Photos and Videos
Mishimoto Front Mount Intercooler w/ Intake Black ( Part Number: MMINT-WRX-08AIBK)
It's good but  3 years ago
Patrickbraceros002257725
Quality wise 5/5, everything you need is in the box, except for the instruction on how to install this fmic, I had a hard time installing this trying to figure out which is which, I base mine on an STI installation guide but it's way different, you need to be patient to be able to install this, or just go to a professional installer and save time. And for the bumper trimming, you might trim a lot, you can't use your fog lights anymore because you have to trim the housing, and you can't use you're license plate relocation via tow hook also cuz the piping is on the way. but over all it's a nice fmic
  
Was this review helpful?
What the 2nd guy is saying is true 3 years ago
Patrickbraceros002257725
Yes there's is no detailed instruction for this, you have to use the STI, you need to cut some of your under tray to fit the pipping for the hot side, you don't need two brackets for the coolant tank, you definitely shave your bumper to fit the fmic, shave your fog light housing, and you can't use your front relocation liscense plate, so if you want to buy this be prepare for anything.
  
Was this review helpful?
Mishimoto FMIC 3 years ago
KennyN
If you ever need detailed instructions Mishimoto's website has viedo's for installation. I had one for my 02 wrx and it was amazing
  
Was this review helpful?
1 of 1 people found the following review helpful
Mishimoto FMIC 3 years ago
Ricky.vidrine71830352
First off, Theres no detailed instructions on how to install this. The step by step instructions they do give are for the STI setup which doesnt run the piping in the same direction, and then they want you to relocate the coolant overflow to the left side (if your looking at your car from the front) and they give 2 brackets to do this and only 1 fit and works properly but they also dont really tell where its suppose to go. You just have to play a terrible guessing game. Also on the turbo side piping youll need to cut out some of your under tray to fit the piping through unless you feel like scratching up that pipe on your frame. Those that are curious of the bumper trimming, Youll cut about 2 solid inches on the inside of your bumber cover. The charge pipes do block your tow hook so be prepared for that. Youll have to cut that block that sits on the inside of the tow hook cover inorder to make your bumper fit as well. Overall great performance but terrible instructions and possibly the oddest design ive ever seen. Im posting some over head pictures incase anyone buys this. One thing is that im glad it has a lifetime warantee so i guess thats a positive. I wouldve rated this a perfect 5 if they had instuctions that made sense and or just had some installed pics. i Googled for one and the pipes were all welded together to i had to interpret that picture as well.
  
Was this review helpful?

QUESTIONS & ANSWERS

  • Q: cai  mike3 years ago

    Will the mishimoto fmic fit with the mishimoto cai?
    • 0 of 0 people found the following answer helpful

      A:  The Mishimoto CAI will likely get in the way of the piping. The Mishimoto Racing intake will be confirmed to fit with the intercooler.

      Josh P. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: Tuning  adam3 years ago

    Does this intercooler front mount need a tune with installation?
    • 0 of 0 people found the following answer helpful

      A:  You will need to get a custom tune after installing this FMIC to see any performance benefits.

      Josh P. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
  • Q: intake fitment  Patrickbraceros0022577253 years ago

    i have a SF cobb intake with box, does this go well with the cobb intake or do i need to change it with mishimoto intake?
    • 0 of 0 people found the following answer helpful

      A:  This FMIC has not been tested with the Cobb intake, and we unfortunately cannot confirm compatibility. The piping will likely fit with the intake, but not the airbox.

      Zach G. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?

This Part Fits

Subaru Impreza
2.5 GT Hatchback
2009 Subaru Impreza 2.5 GT Hatchback
2010 Subaru Impreza 2.5 GT Hatchback
2.5 GT Sedan
2009 Subaru Impreza 2.5 GT Sedan
2010 Subaru Impreza 2.5 GT Sedan
WRX Hatchback
2008 Subaru Impreza WRX Hatchback
2009 Subaru Impreza WRX Hatchback
2010 Subaru Impreza WRX Hatchback
2011 Subaru Impreza WRX Hatchback
2012 Subaru Impreza WRX Hatchback
2013 Subaru Impreza WRX Hatchback
2014 Subaru Impreza WRX Hatchback
WRX Limited Hatchback
2010 Subaru Impreza WRX Limited Hatchback
2011 Subaru Impreza WRX Limited Hatchback
2012 Subaru Impreza WRX Limited Hatchback
2013 Subaru Impreza WRX Limited Hatchback
2014 Subaru Impreza WRX Limited Hatchback
WRX Limited Sedan
2010 Subaru Impreza WRX Limited Sedan
2011 Subaru Impreza WRX Limited Sedan
2012 Subaru Impreza WRX Limited Sedan
2013 Subaru Impreza WRX Limited Sedan
2014 Subaru Impreza WRX Limited Sedan
WRX Premium Hatchback
2010 Subaru Impreza WRX Premium Hatchback
2011 Subaru Impreza WRX Premium Hatchback
2012 Subaru Impreza WRX Premium Hatchback
2013 Subaru Impreza WRX Premium Hatchback
2014 Subaru Impreza WRX Premium Hatchback
WRX Premium Sedan
2010 Subaru Impreza WRX Premium Sedan
2011 Subaru Impreza WRX Premium Sedan
2012 Subaru Impreza WRX Premium Sedan
2013 Subaru Impreza WRX Premium Sedan
2014 Subaru Impreza WRX Premium Sedan
WRX Sedan
2008 Subaru Impreza WRX Sedan
2009 Subaru Impreza WRX Sedan
2010 Subaru Impreza WRX Sedan
2011 Subaru Impreza WRX Sedan
2012 Subaru Impreza WRX Sedan
2013 Subaru Impreza WRX Sedan
2014 Subaru Impreza WRX Sedan