SET YOUR CAR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

GrimmSpeed Hood Scoop Splitter

MODEL # GRM093077

$199.00


  • Q: Grimmspeed tmic  Edahl774 years ago

    Will this work on an 03 wrx with an sti hood scoop and a grimmspeed tmic?
    • 0 of 0 people found the following answer helpful

      A:  This is not confirmed to fit a 2003 wrx.

      Trevor C. @ RallySport Direct 4 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  If your 03 WRX is using the JDM 02-03 STi hood scoop, then the splitter you will want to run is part number 093074. Hope that helps! Andy

      GrimmSpeed @ GrimmSpeed 4 years ago  
        
      Was this answer helpful?
  • Q: I/C Spray Retention  Brock Samson4 years ago

    I have an 07 STi which has the Intercooler Spray line that runs to the OEM splitter. Will this splitter let me retain that function?
  • Q: WRX with STI intercooler  Alberto De Santa Anna5 years ago

    i have a WRX 06 with STI tmic. is this splitter work with my setup?
    • 0 of 0 people found the following answer helpful

      A:  This splitter was designed to be used with the GrimmSpeed TMIC. The STi intercooler core is similar in length and width, so the splitter should work well for you. -Andy

      GrimmSpeed
        
      Was this answer helpful?
  • Q: Rubber bellow  kondan5 years ago

    Does this eliminate the stock bellow or rubber shroud?
    • 0 of 0 people found the following answer helpful

      A:  Yes the entire OEM splitter and shroud is replaced by this piece. Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: Measurements?   curtisr4015 years ago

    What are the measurements of the bottom of the shroud, where it meets the intercooler?
    • 1 of 1 people found the following answer helpful

      A:  This is approximately 18 1/4 wide by 6 1/2 deep. Mike

      GrimmSpeed
        
      Was this answer helpful?
  • Q: Fit an STI TMIC?  corey.block7840146 years ago

    Hey I am putting an STI TMIC(05 tmic) on my WRX(06), would this shroud be an effective upgrade for this setup?
    • 0 of 0 people found the following answer helpful

      A:  This Shroud is specifically made for the GrimmSpeed Top mount, But will still be effective on an OEM sti Top mount.

      Kyle A. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: GRM 090024  Marco6 years ago

    I have a 2006 wrx sti and would like to get the grimmspeed top mount intercooler grm 090024 would this work with that intercooler? Also how much cooler would the intercooler be? thank you for your help.
    • 0 of 0 people found the following answer helpful

      A:  Yes these parts are compatible and were designed together. Temperature change is going to be greatly effected by your set up and will very from car to car. This unit is much more effective/efficient than stock. Mike

      GrimmSpeed
        
      Was this answer helpful?