SET YOUR CAR
Buy Now, Pay Later! Starting at 0% APR
FREE SHIPPING
On orders over $100
TALK TO A PARTS EXPERT
RALLYSPORT GUARANTEE
100% Money Back on Select Parts

Process West Intake Manifold Track Version (Reverse Throttle Position)

MODEL # PRW PWIM001

$1,935.00


  • Q: vacuum nipples   colessti2 years ago

    Hello, I have this intake manifold but its the track version DBW . What is the size and thread pitch for the 5 holes in the back. Mine didn't come with anything. Also I noticed one of your customers had trouble with fitment with the throttle body. I had the same issue with my out front motor sports relocation bracket hitting. You will have to ditch that entire bracket and use the factory bracket and flip the alternator to the other side and either use the a/c compressor bracket to secure the other side or buy Iag's bractet.
  • Q: Process west intake manifold (track version)   Mike3 years ago

    What all is included with the intake manifold? Does it include alternator relocation hardware and belt? Are risers required for the intake manifold like when rotating the stock STI manifold or will risers not be needed? Will a spacer be required for the throttle body as well or no?
    • 0 of 0 people found the following answer helpful

      A:  This is only for the manifold, vacuum nipples or plugs will have to be sourced depending on what you need. No alternator relocation is included. Risers are not required for the intake manifold and a spacer is not required for the throttle body either, the standard TB should bolt right up to the manifold.

      Nick S. @ RallySport Direct 3 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  This intake has been nothing but a great headache trying to mount Throttle Body and alternator. On my sons 2006 STI readily available alternator relocation kit/bracket will not work as the alternator hits the throttle body itself if clocked to different poisition and if left in stock position it hits the large plastic Drive By Wire housing and the long slotted bracket hits it on the front as well. We are waiting for a TB spacer so we can clock the TB upside down to make it work but doesnt look like it will. The TB sticks out too far and points slightly down on this intake interfering with mounting of relocated alternator. No where on Process West site or vendors sites is fitment issues mentioned. So be expected to fab up your own custom relocation brackets to try and make this work. First picture shows the problem and how far its off to clear the TB. Second picture shows TB clocked 45 degrees but alternator is still hitting side of TB and no way will the slotted bracket get behind the alt hole cause alt hole is up against TB.

      briann51035766
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  Update on using a spacer for TB. No still wont clear the slotted bracket needs to be trimmed and TB itself needs to be ground down on side for alternator to clear it. We are now going to ditch the stock TB and go with a aftermarket larger bore 75mm one which actually has more clearance on alternator side and should work. Whats another $500+ dollars to make this intake work.

      briann51035766
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  OK finally had to modify the stock ac bracket and use the P&L tensioner with our rotated and reversed fmic kit. Little more refining to be done but it fits. That is an Boomba Racing 75mm throttle body as it gives more room than stock one for alternator clearance. Kudos to EQ tuning in Fairfield for taking a lot of time figuring all this out!

      briann51035766
        
      Was this answer helpful?
  • Q: Rotated kit needed?  jeff88blake938365 years ago

    I have a stock location turbo. Do i need to go rotated to run this?
    • 0 of 0 people found the following answer helpful

      A:  This is for rotated intake manifold, there the throttle body faces the front of the car. Please refer to the images listed below to see how it fits on the car.

      Kirill C. @ RallySport Direct 5 years ago  
        
      Was this answer helpful?
  • Q: 08+ STI Fitment Question  SMY Performance6 years ago

    will the AC need to be removed or alternator relocated to make this fit? I am aware of a custom FMIC would need to be made to make this work. Do you guys have installed pictures of this unit on a car?
    • 0 of 0 people found the following answer helpful

      A:  Yes, AC compressor will need to be removed and alternator relocation is also required.

      Process West @ Process West 6 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  Will the Street version manifold look this nice?

      SMY Performance @ Process West 6 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  street manifold is just as nice

      Process West @ Process West 6 years ago  
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  When will this street version be available?

      SMY Performance @ Process West 6 years ago  
        
      Was this answer helpful?
    • 1 of 1 people found the following answer helpful

      A:  Any update as to the availability of the street version?

      Tyrial
        
      Was this answer helpful?
    • 0 of 0 people found the following answer helpful

      A:  I have heard that it will be available soon within 30-60 days RSD will have them. The street version looks just as amazing has the reverse intake manifold.

      SMY Performance @ Process West 6 years ago  
        
      Was this answer helpful?
  • Q: 08+ WRX Fitment?  ironstuner22709746 years ago

    Would this fit an 09 WRX?
    • 0 of 0 people found the following answer helpful

      A:  This unit can be made to fit, but will require custom work such as intercooler piping, turbo inlet fitment and so forth. So it can work, but it will not be direct factory bolt on.

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Fitment  Hyphee6 years ago

    What makes this in work on an 04 sti
    • 0 of 0 people found the following answer helpful

      A:  It can be made to work. But you will need to figure out a way to attach the throttle body drive by cable system

      Kirill C. @ RallySport Direct 6 years ago  
        
      Was this answer helpful?
  • Q: Stock TMIC??  TheKasey6 years ago

    Does this manifold require you to swap to a FMIC like the Cosworth manifold?