-
Q: Fuel injector fitment Clafond96 2 years ago
Do the iag 2600cc injectors in the kit iag-afd-261 fit in this intake manifold
-
-
0 of
0 people found the
following answer helpful
A: Yes, the IAG injectors will work.
Lane H. @ RallySport Direct 2 years ago
-
0 of
0 people found the
following answer helpful
-
Q: Adapter for cable throttle? crankyfart2 years ago
Do you guys sell the adapter or flange that is required for using this intake manifold with a cable throttle?
-
-
0 of
0 people found the
following answer helpful
A: Unfortunately we do not at this time.
Lane H. @ RallySport Direct 2 years ago
-
0 of
0 people found the
following answer helpful
-
Q: AMS Manifold height trevspice444993 years ago
Can you tell me what the overall height of the AMS manifold is? I'm trying to figure out whether it's tall than the Process West with tgvs. Thanks.
-
-
0 of
0 people found the
following answer helpful
A: From its highest point to lowest, it is 285mm.
Lane H. @ RallySport Direct 2 years ago
-
0 of
0 people found the
following answer helpful
-
Q: vacuum Subie_sibs_3 years ago
was wondering what vacuum lines are deleted with this would it be worth buying a 3" turbo inlet
-
-
0 of
0 people found the
following answer helpful
A: you should be able to keep all of your vacuum systems, now the solenoids and lines may not be able to be mounted up like stock, but with the ports on the bottom of the manifold, there should be no reason you would have to delete any of those. In regards to the inlet, it really depends on the turbo you are wanting to run and how much power you want to make. If you're going with a large frame turbo, I think the 3inch inlet is worth it for the added air flow. Thanks!
Rick C. @ RallySport Direct 3 years ago
-
0 of
0 people found the
following answer helpful
-
Q: Retain AC? 2010 White STI3 years ago
Are you able to retain working air conditioning?
-
-
0 of
0 people found the
following answer helpful
A: I am not aware of this disabling the AC.
Brady R @ RallySport Direct 3 years ago -
0 of
0 people found the
following answer helpful
A: On my 2015 I had no issues with the AC lines. If I remember correctly I mildly bent one out of the way for more clearance.
SteveWasHere
-
0 of
0 people found the
following answer helpful
-
Q: 2016 STI Bradley760 3 years ago
Will this manifold work with a TMIC?
-
-
0 of
0 people found the
following answer helpful
A: This is specifically designed for FMICs, running a TMIC would likely require fairly significant fabrication.
Marcus E. @ RallySport Direct 3 years ago
-
0 of
0 people found the
following answer helpful
-
Q: Stock Location Turbo 04FXT3 years ago
I have a stock location gtx3076r with a perrin 3" turbo inlet tube. Are there any clearance issues with a larger stock location turbo or larger turbo inlet tube?
-
-
0 of
0 people found the
following answer helpful
A: I do not believe you should run into any clearance issues.
Tylo R @ RallySport Direct
-
0 of
0 people found the
following answer helpful
-
Q: Injector fitment miguelmotocross075389604 years ago
I have a STI 2006 with the ID top feed conversion kit, do the fuel rails and the injectors in the top feed conversion kit will fit this Intake Manifold?
-
-
0 of
0 people found the
following answer helpful
A: You will need Aftermarket fuel rails and injectors for the 07+ STi.
Jared A. @ RallySport Direct 4 years ago
-
0 of
0 people found the
following answer helpful