- Exhausts
- Cat Back Exhaust System
- Downpipes And Y-pipes
- Exhaust Headers And Manifolds
- Exhaust Gaskets And Hardware
- Axle Back Exhausts
- Shop All
- Engine Management
- Plug And Play Engine Management
- Staged Power Packages
- Engine Management Sensors
- Stand Alone Engine Management
- Engine Management Harnesses
- Shop All
- Air Induction
- Short Ram Air Intakes
- Turbo Inlet Hoses And Pipes
- Cold Air Intakes
- Air Intake And Maf Hoses
- High Flow Replacement Panel Filters
- Shop All
Invidia N1 Cat Back Exhaust Titanium Tips
Subaru WRX Sedan 2008-2014 / STI Sedan 2011-2014 / Forester XT 2009-2014
Features & Product Details
RallySport Direct proudly carries a large selection of quality high-performance master-crafted exhaust options brought to you by Invidia.
This is the Invidia N1 Cat-Back Exhaust System. The N1 is one of Invidia's most popular cat-back options offered in their catalog due to the quality stainless steel construction that combines smooth bends with an increase in piping diameter. This allows for an unobstructed flow path for the exhaust gases to exit which will increase both the horsepower and the torque while improving the overall throttle response. Additionally, users will be rewarded with the race-inspired sound this exhaust system will create which will make the overall driving experience much more enjoyable.
DETAILS:
Specifications
PEOPLE WHO VIEWED THIS ITEM ALSO VIEWED
REVIEWS & CUSTOMER MEDIA
Have been running this catback behind the OEM downpipe for some time. From the looks to the sound, it is the quintessential Subie CBE. My only complaint is mounting it is kinda rough, and I've yet to get it to hang equally on both sides. Will give it one final try when my new DP arrives, but for now I'll continue to relish in the Songs of Our People.
Best sounding Best Value Best aesthetic Best Quality ^ ^ ^ My opinions
I was on the fence on whether I should get the N1 or the Q300. I regret nothing by going with the N1. I do like the quad tip look but I was looking for something different than stock and the dual single-exit design was it. I was running this catback on the oem downpipe for a while and it wasn't bad at all. It really brought out that subie rumble while still maintaining an appropriate level of sound...then I bought Invidia's downpipe. Cold starts are the best thing about my day so far. Install was straight forward. I had a lift but I've helped a friend do a full exhaust swap with a pair of jack stands. DON'T forget the anti seize if you're planning to change out the downpipe later on.
The build quality on this is amazing. From the welds to the fitment, and even the included hardware, you can really tell Invidia takes their brand seriously. The tone of this system is that signature, deep rumble which really opens up in the higher RPMs. However, with a stock DP it's not terribly as aggressive as I'd like. Ran into some issues when using the GrimmSpeed OEM DP to 3" adapter which I'm working out with GrimmSpeed now. Rally Sport Direct is awesome as well! Customer service is top notch.
Love the sound Love the performance Thank you rally sport! Best exhaust iv used on my subaru so far :)
QUESTIONS & ANSWERS
-
Q: Invidia N1 TimmyJohns502 years ago
Will this part fit to a Cobb 3” downpipe?
-
-
0 of
0 people found the
following answer helpful
A: Yes, this will bolt to your Cobb downpipe.
Lane H. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: 2010 Forester XT Stock DP Dolf2 years ago
-
-
0 of
0 people found the
following answer helpful
A: This will give you a nice aggressive sound without being too ear splitting. You would also need a stock downpipe to 3" cat back adapter. https://www.rallysportdirect.com/part/exhaust-gaskets-and-hardware/grm-077046-grimmspeed-oem-downpipe-to-3in-cat-back-adapter
Lane H. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Catless downpipe M2 years ago
-
-
0 of
0 people found the
following answer helpful
A: This will bolt to a 3" downpipe without an adapter.
Lane H. @ RallySport Direct 2 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Installation blacksails184 years ago
-
-
0 of
0 people found the
following answer helpful
A: If you're running the stock downpipe, you'll want an OEM downpipe to 3" catback adapter, such as GRM077046.
Marcus E. @ RallySport Direct 3 years agoWas this answer helpful?
-
0 of
0 people found the
following answer helpful
-
Q: Gaskets and hardware Nate4 years ago
-
-
0 of
0 people found the
following answer helpful
A: There isn't a kit, and the only hardware we carry is the gaskets. You will need two 3" gaskets and two 2.5'' gaskets. You can get the nuts and bolts from a local hardware store.
[email protected]Was this answer helpful?
-
0 of
0 people found the
following answer helpful
